LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 7 Super Diodes - Round - Red Lens

Video Transcript for Optronics Trailer Lights - Tail Lights - STL13RB Review

Today we're going to take a look at the Optronic submersible red round trailer taillight. This has a stop, turn and tail function and it uses seven super diodes. This round trailer taillight will serve three functions, a stoplight, a taillight, and a turn signal light. This is a nice sonically sealed waterproof housing and lens which makes it submersible. The LEDs that it uses makes great replacements for your incandescent lights. They last about 50 times longer, they are more efficient, so they'll provide a brighter light with less power output and there's no bulbs to replace or no brittle filaments. This is a polycarbonate lens and housing.

The lens is a red lens. This is a design to mount with a rubber grommet. It is a recessed mount. The rubber grommet we do sell separately on our website and it is listed on this product page as a related product. This light is designed to fit into 4-1/2" diameter hole.

It does accept the industry standard three-pronged plug you can see here on the back, and again we do sell those separately. There are two versions, I happened to pull them. The first one is a straight. This is part number A45PB, and the straight version when you plug it it, you can see the wires will come straight out. The other version is the A47PB, and that's the right-angle version. When you plug that one in, you can see that the wires do come out at a right angle.

Either one of those will work with this light. This light is Department of Transportation compliant. I want to give you a few dimensions on this. The overall diameter from edge to edge on this light is going to be right at 4-5/16. The depth, I'm going to give the measurement from here to here, and that's going to be 1-13/16 and then the depth of just the lens itself is about 3/4". Again, this uses the seven super diodes.

The power draw on this light at 12.8 volts for the taillight is 0.033 amps, for the stop and turn signal light is 0.234 amps. The warranty on the LEDs is lifetime. What I'm going to do here is we're going to take one of the . We'll take the straight. We're going to plug it in. I'm going to hook this up to a 12 volt power supply to give you an idea how bright the light is. It is a three-wire plug, so we'll take the white wire and that'll go to our ground. We'll take our black wire, and that'll go to our taillight, and then the red wire will be for your stop and turn signal. With that all connected, we'll go ahead and turn off the overhead lights. We'll go ahead and turn on the 12-volt power, and you can see there's your taillight. The brightness of your taillight. When you hit your brakes, you can see how much brighter that light gets. When you do your turn signals, you can see very bright LED light. We'll go ahead and turn off our power, disconnect our light, and then we'll go ahead and turn on our overhead. That should do it for the review on the Optronic submersible red round LED trailer taillight with a stop, turn and tail function and seven super diodes.