Summer Starts Here - Save up to 70%
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Average Customer Rating: 4.7 out of 5 stars (22 Customer Reviews)
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.Nice addition, very easy installation done it all by myself less than 2 hrs. Biggest problem was removing the exhaust....etrailer makes a great aftermarket trailer hitches for Corvettes...
I ordered two Curt hitches for my 2004 Corvette and Volvo XC70. Both have proved to be very good for supporting my Thule bike rack. The install priced to be very easy thanks to the construction and included instructions. I am looking for Nother hitch and will be using a Curt hitch. M
Worked very well, no problems
You’re gonna love this! I put the hitch on my Corvette to haul a small luggage trailer on long trips. The hitch works great!
Trailer Hitch receiver for Corvette was difficult to install as a do it yourself project but it is done! I think etrailer should provide 4 fish wires rather than 2. There are four 18 mm bolts thus 4 fish wires are needed. I picked up two from a friend in the business and all went well! The video etrailer provides is correct...you do need to remove the exhaust mufflers to install their hitch! Impossible to do as the written instructions depict! If your doing the install yourself for the first time you need a floor jack, jack stands, a powerful drill and lots of patience! The fish wires can be difficult! But, hang in there and you can get it done!
The hitch is well made and basicly easy to install. I made a templet from 1/8 plywood to layout my holes. however, due to my Bola exhaust, I could not install the hitch pin. I solved the problom by drilling and taping another hitch pin hole (1/2 -18) I used two short 1/2 " bolts on each side in place of the hitch pin. Works great. Hope this helps others.
Very nice quality. Got here fast. Installed ok. Need to adjust the aftermarket exhaust because when you give it gas it starts banging on the receiver. No biggie, just an FYI, so you don't repeat my mistakes and bring the exhaust within millimeters of the hitch receiver.
This hitch fit perfectly on the frame of my 2001 Corvette. It was an easy install. You don't need to remove the exhaust just remove the bolts that hold it up at the end.
Etrailer delivered the hitch in just a couple of days. Definitely fast shipping! Quality product......
I have always enjoyed my shopping experience with etrailer. This hitch does exactly what it said it would do. Even though I am in Canada the shipment came extremely quickly.
I will continue to shop at etrailer in the future!
A*W*E*S*O*M*E Customer SERVICE-- 1 call cleared it all-! did not have to haggle with different dept. as some on ebay do---(run around)--Overall i am very pleased with the product and can't wait to install it---Fast Shipping. WILL SHOP AGAIN..Keep up the good work---sales was very good also...Lighting Speed...
Bought the Hitch and wiring kit for a 2002 Z06 C5 Vette. This Hitch fit perfect and cleared the exhaust without any issues at all. The instructions and the video gave me the confidence to go do it myself. Took about 1.5 hours had one muffler clamp the the nut was stripped so it took time to cut it off and work through that issue. Used a strap to pull the exhaust back and that made drilling all the holes easy.
Well made product IF it fit. The width of this hitch is good, but, when I went to install it I found it didn’t work. The c5 model has a little V shape to it where the hitch should bolt and the hitch doesn’t fit flush. If I were to install it the hitch would have a downward angle. So, I’m sending it back. I have gotten many great products from this company. This is the first miss. :-(
Works well for bicycle rack behind 2004 C5 Corvette convertible, for added practicality!
Installed on 2000 corvette Easy Installation Good product Priced right. Plan on pulling motorcycle trailer with it.
Works well towed a sport bike from Florida to Tennessee
Steve
7/12/2023
100
Wonderful product. Easy install.
Install was great! Hitch works great!
Just got my items that we’re securely wrapped and look and operate great. Thank you all!
Look good the sticker got damaged i figure in shipping but looks good not install it yet
Arrived in record time.......everything there in the package, like it was supposed to.
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Michael
6/13/2018
Hitch has been outstanding. They have stood up to the Maine winters and look like new. Will be ordering another for the Forester. Keep up the great work