Optronics LED Clearance or Side Marker Light - Submersible - 3 Diodes - Round - Amber Lens

Optronics Trailer Lights - MCL57AB

2-1/2" Diameter. Waterproof, LED trailer light serves as a side marker light or a clearance light. Durable polycarbonate lens and housing. Recessed mount with grommet (sold separately). Accepts standard 2-pin PL-10 plug. P2 rated.

Features:

• Round trailer light can function as both a clearance light and a side marker light when properly mounted
• Sonically sealed, waterproof housing and lens unit is submersible
• Durable surface-mount technology (SMT) construction of LED circuit board
  • Better withstands shock and vibration
  • Allows for improved heat reduction
• LEDs make great replacements for incandescent lights
  • Last 50 times longer
  • More efficient - provide brighter light with less power output
  • No bulbs to replace - no brittle filaments
• Amber lens over white LEDs
• Durable polycarbonate housing and acrylic lens
• Compatible with 12V electrical systems
• Recessed mount with grommet (A55GB or A56GB - sold separately)
• Accepts industry-standard 2-prong plug (A46PB or A86PB - sold separately)
• DOT compliant
  • Meets FMVSS 108 requirements in any 360-degree position
• P2 rated

Specs:

• Dimensions: 2-1/2" diameter x 1" deep
• Diodes: 3
• Power draw at 12.8V: 0.06 amps
• Input voltage: 12V
• Lifetime warranty on LEDs

Sonically Sealed, Waterproof Trailer Light

The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.

P2-Rated Lights

A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.

PL-2 Wiring Connection

This light has an industry-standard PL-2 connection as pictured above. The light accepts a 2-prong plug (sold separately). The plug connects to 2 of the points on the PL-2 connection for power and ground. And the plug covers the unused third point on the connection to seal it against dirt and moisture.

Recessed-Mount Light

Recessed-mount trailer lights install underneath a housing or a grommet, which is often sold separately. These lights will extend into the mounting surface and require that a hole be cut into your trailer.

MCL57AB Optronics LED Clearance or Side Marker Light - Submersible - 3 Diodes - Round - Amber Lens

Alternate part number: MCL-57AB