Summer Starts Here - Save up to 70%
12V Switch illuminates when it is in the "on" position. SPST, 10 amps at 125V AC, 6 amps at 250V AC, 15 amps at 12V DC. Fits cutouts measuring 3/4" tall x 1/2" wide.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Ellen: Hey, everyone. I'm Ellen here at etrailer.com, and we're going to be taking a look at the Illuminated Mini Switch.This is going to give you a clear indicator if your item is powered on or off. This is just going to be a single pole single throw, so that basically just means that it's going to direct the current from either on or off for one thing.So I can take a little closer look at it. The nice thing about this is that, again, it is going to be illuminated. So that's going to let you know whenever it's turned on or off. When it's on, the light on the switch comes on.
It's this nice red color, so it's very visible. It is going to be a 12 volt switch for that illumination. The ratings, the power ratings for this, for AC power, it's going to be rated at 10 amps for 125 volts or 6 amps at 250 volts. It can also handle 15 volts.. or excuse me, 15 amps at 12 volts DC.For the size, overall, it's about 7/8 of an inch long and about 9/16 or little under 5/8 of an inch wide.
The cutout that this will fit into will be about of an inch.There are these little tines on either side to help hold the tension in either a faceplate or a cutout that you actually have in the wall or the accessory that you're mounting this into. So there's a little bit of play there, but you want to have at least of an inch for that cutout up to maybe 7/8, but no more than that. Width-wise for the cutout, it's about half an inch. Depth coming from the surface to where that switch is is about half an.. or excuse me, about of an inch and then overall, about an inch and 1/8.That's about all there is to it for our little Mini Switch.
Should be pretty simple and give you a replacement or an additional switch for any kind of accessory. Hope this video has been helpful in deciding if this is the right switch for you. If not, we do have a lot of other accessories here at etrailer.com, so check them out.Thanks for watching.
Average Customer Rating: 4.8 out of 5 stars (5 Customer Reviews)
12V Switch illuminates when it is in the "on" position. SPST, 10 amps at 125V AC, 6 amps at 250V AC, 15 amps at 12V DC. Fits cutouts measuring 3/4" tall x 1/2" wide.Got it Fast, and it works great
Thank you Etrailer
I used this to replace my old (32 yo) waterpump switch. I wanted an illuminated one to remind me to turn it off. I had to run a ground wire and it works perfectly. I hope it lasts as long as the old switch (which still works!)
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.