LED Trailer Tail Light w/ Reflector - Stop, Tail, Turn - Submersible - 7 Diodes - Round - Red Lens
(62 reviews)
Price: $27.02
In Stock
LED Trailer Tail Light w/ Reflector - Stop, Tail, Turn - Submersible - 7 Diodes - Round - Red Lens
Item # STL13RFHXB
Retail:$34.43
Our Price: $27.02
You Save: 22%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (62)
- Q & A (0)
- Photos
Optronics Trailer Lights - STL13RFHXB
- Tail Lights
- Round
- LED Light
- Red
- 5-5/8 Inch Diameter
- Surface Mount
- Stop/Turn/Tail
- Submersible Lights
- Optronics
5-5/8" Round. Waterproof LED trailer light acts as a stop, tail, and turn signal. Built-in reflex reflector. Durable polycarbonate housing and lens. Surface mount with built-in flange - hardware not included. 3-Wire design.
Features:
- Round trailer tail light serves 3 functions when properly mounted
- Stop light
- Tail light
- Turn signal light
- Built-in reflex reflector removes the need for a separate reflector
- Sonically sealed, waterproof housing and lens unit is submersible
- Surface-mount technology (SMT) construction of LED circuit board
- Better withstands shock and vibration
- Allows for improved heat distribution
- LEDs make great replacements for incandescent lights
- Last 50 times longer
- More efficient - provide brighter light with less power output
- No bulbs to replace - no brittle filaments
- Durable polycarbonate lens and housing
- Red lens over white LEDs
- Surface mount with built-in flange - hardware not included
- 3-Wire design
- FMVSS compliant for trailers under 80" wide
Specs:
- Overall dimensions: 5-5/8" diameter x 3/4" thick
- Light face: 4" diameter
- Diodes: 7
- Wire length: 6"
- Power draw at 12.8V:
- Stop/turn: 0.234 amps
- Tail: 0.033 amps
- Lifetime warranty on LEDs
Sonically Sealed, Waterproof Trailer Light
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
Surface-Mount Light
Surface-mount lights install flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the light. This type of light is installed using a flange or bracket that has mounting holes. And mounting hardware is used to secure the light to the trailer.
STL13RFHXB Optronics LED Trailer Tail Light w/ Reflector - Stop, Tail, Turn - Submersible - 7 Diodes - Round - Surface Mount - Red Lens
California residents: click here
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Did not arrive in time
Customer Reviews
LED Trailer Tail Light w/ Reflector - Stop, Tail, Turn - Submersible - 7 Diodes - Round - Red Lens - STL13RFHXB
Average Customer Rating: 4.9 out of 5 stars (62 Customer Reviews)
5-5/8" Round. Waterproof LED trailer light acts as a stop, tail, and turn signal. Built-in reflex reflector. Durable polycarbonate housing and lens. Surface mount with built-in flange - hardware not included. 3-Wire design.by: John03/16/2024
These were really easy to install. I found that I needed more markers on the side of our 5th wheel trailer (44') I actually posted a few videos of people turning into our lane thinking they had passed the trailer. Connected to the rear and front marker lights and I have had no problems since.
by: Jason02/26/2024
I think the photos and the video accurately depicted the light. I don't plan on submerging my lights (I installed them on a car vice a trailer), but I believe the lights would do fine. they are completely enclosed. Great communication from Carol at etrailer following purchase.i posted a video of the installed lights to YouTube
by: Mauricio06/22/2023
We are really happy with this product and it fit our trailer perfectly. Plus, they were easy to install. All in all, it was a nice update to our 1960s Apache trailer.
by: Rich S02/16/2024
Restoring my old '71 Shasta camper I wanted to upgrade the analog taillights with LED's. These lenses worked great and I was able to use the old aluminum back covers. These lenses are close to the old ones in shape and size and will make the camper safer on the highway. Thx
by: Donna 02/07/2024
The only thing is they weren’t the same style that was originally on the trailer so I bought two to match.
by: Patrice03/14/2024
After going through other vendors for tail-lights, I found these are the perfect match to the OEM’s! Thank you!
by: Sf06/01/2019
Replaced problematic lights on my vintage trailer. Eliminated bulbs and problems associated with them and replaced with LED. Easy install and quality product
by: Ken10/12/2023
Excellent product, easy to install and performs as expected. Used as a replacement for 1969 Apache pop-up camper.
by: Rick 12/09/2023
Great product. Exactly what I needed for my rebuild project.
by: Charles 09/09/2023
Work great, still have them. Thanks
by: David10/22/2018
I am very satisfied with etrailer and the ordering and shipping of the products, I had questions on the description of the round tail lights so I called etrailer and it was cleared up. The lights are perfect for my application. They are mounted on a small camping trailer that is pulled behind a motorcycle and space is limited so these being only 3/4" thick is great and because they are LED it makes it easier on the motorcycle electrical system. The outside diameter is 5 5/8 inch as on the video review along with all the rest of description is correct. A very nice light indeed.
by: Brian 06/28/2023
Great product
by: Vincent 06/28/2023
looks good
by: Joyce 06/03/2023
Just as expected
by: Jon 06/02/2023
Just as described. Quick delivery.
by: Tom 08/13/2021
They’ve changed the look of the light slightly, but it was a good replacement for my R-pod trailer. I just changed both lights
by: Cleve05/19/2020
Safety update for my antique Shasta. Bright and well made' my only problem was my own failure to order the stainless steel rings to really finish off the install and add some more strength to the light structure; don't be cheap order the rings.
by: Randy 04/01/2023
Have not used them yet but the type is what I needed
by: Charles 02/14/2021
Great fit, easy install and a great looking pair of tail lights for my old 65 Terry trailer.
Exactly what I was hoping for.
by: Vance T07/03/2020
Everything worked out perfectly! Quality tail light that hasn't had a problem since we installed it.
by: Julie05/14/2019
The lights we ordered came in a very short time and we are very pleased with the product. I would highly recommend this company for replacement parts for your trailer.
by: John06/23/2022
They are flat and sealed and bright, also reflective.
by: Richard 11/20/2021
I ordered a set of these as replacements for older lights. Perfect fit! Bright, and work great!
by: Tracy 07/16/2021
Great improvement over the stock LED lights. Very pleased!
25
62
Show More Reviews
See what our Experts say about this Optronics Trailer Lights
- Is LED Trailer Taillight # STL13RFHXB Sold in Pairs or IndividuallyThe LED Trailer Tail Light w/ Reflector # STL13RFHXB that you referenced is sold individually. The reason there is a picture that shows two assemblies is because it shows a picture of it lit up and a picture of it not lit up to show difference basically. If you needed two of these you'd need to order a quantity of two.
view full answer... - Availability of LED Replacement for Round Glo-Brite 9541 Light Assembly The closest option we have available to your existing round Glo-Brite assemblies (which are no longer made) is the Optronics LED Trailer Tail Light # STL13RFHXB. This assembly has an overall diameter of 5-5/8" and the light face itself measures 4" in diameter. This unit has a standard 3-wire pigtail (not the 3-prong plug) so you would need to hardwire it to your trailer's wiring at the back. The 3 bolt holes are spaced apart by exactly 4-1/4", so you may need to drill some additional...
view full answer... - Troubleshooting Dim Tail Light On Forest River R-Pod Travel TrailerIt sounds like there may be a problem with the right LED Trailer Tail Light # STL13RFHXB. As you have already verified you have power going to the light you will want to verify the wire isn't damaged behind where you tested going into the light. There are 3 wires with one ground, one for the brake/turn signal and the last wire for the running lights. If the wire is good all the way up to your tail light then the light assembly will need to be replaced. Since you mentioned it being a new...
view full answer... - Recommended Tail Lights For 4" Round Hole on Stock TrailerWith having a 4" round hole I recommend using the LED Trailer Tail Light # STL13RFHXB. This light is 5-5/8" round and will mount over the 4" hole you have. It includes wiring for the running lights as well as turn/brake signals. The recessed lights like the GloLight # STL101RKB are designed to fit the more commonly used 4-1/2" hole.
view full answer... - Can a 4 Inch Round Trailer Tail Light Be Riveted OnThe LED Trailer Tail Light w/ Reflector part # STL13RFHXB could hold up to a rivet gun or it could not, there are really too many variables to advise on this but if you were to use the Stainless Steel Trim Ring part # A5TRSSB over the mounting flange I believe that would then allow you to use a rivet gun without breaking the plastic. There is also the option of the Peterson Trailer Tail Light w/ Stainless Steel Housing part # 429800 but this has an incandescent bulb, not an LED.
view full answer... - Wiring Trailer Taillights, What Wire Connects to What? On the LED Trailer Tail Light w/ Reflector # STL13RFHXB the black wire is for the tail/running lights. The red wire is the brake and turn signal lights and the white is the ground. I have attached below a help article that covers the wiring on trailers as well in case you have any other questions beyond that.
view full answer... - Replacement Trailer Brake Turn Light for 1969 Apache Mesa TrailerWhile I was not able to find anything that cross referenced with the SAE number you mentioned the Optronics light part # STL13RFHXB is very close to what you mentioned in terms of size and function so it would work great. This is a very common style of taillight found on older trailers like what you have as well.
view full answer... - Replacement 5th Wheel LED Tail Light for a Round Red LightThank you so much for your photos. We don't have an exact replacement light for you, but we have something very close. It's the Optronics LED Trailer Tail Light, part # STL13RFHXB. This LED light measures 5-5/8" in diameter (almost exactly what your current one measures) and has the three mounting holes. It features the 7 diodes that your current one seems to have and the same three functions. Most importantly, it's round and fully red. This is a flush-mount design, so there is a difference...
view full answer...
- Troubleshooting New Brake Lights That Both Lights Flash On One SideIt looks like you purchased and installed the LED Trailer Tail Light w/ Reflector - Stop, Tail, Turn - Submersible - 7 Diodes - Round - Red Lens # STL13RFHXB on a trailer. Typically when this happens it indicates a bad ground somewhere on the trailer, so you'll want to check the ground connection on the right side light, as well as any ground wire for the entire trailer. This would be a great starting point for your troubleshooting, but if all of your ground wires are firmly connected...
view full answer... - Availability of Round Trailer Taillights You could use round trailer taillights like the part # STL13RFHXB to accomplish what you are looking for. These are surface mount and would attach easily to outside of your camper.
view full answer...
Do you have a question about this Trailer Light?
Info for this part was:
Expert Research:
Jameson C
Installed by:
Cole B
Edited by:
Daron K
Written by:
Brian T
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Sf
6/2/2020
A year later and things are still working great, I should have done this sooner!!