bing tracking image
  1. Trailer Lights
  2. Optronics
  3. Tail Lights
  4. Round
  5. LED Light
  6. Red
LED Trailer Tail Light w/ Reflex Reflector - Stop, Tail, Turn - Submersible - 10 Diodes - Red Lens

LED Trailer Tail Light w/ Reflex Reflector - Stop, Tail, Turn - Submersible - 10 Diodes - Red Lens

Item # STL43RBX
Our Price: $17.85
Trailer Lights
Shipping Weight: 0.43 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Need help with installation?
Locate installers near me
5-3/4" Diameter round. 3-Function, waterproof LED light acts as a brake, tail, and turn signal. Built-in reflex reflector. Durable polycarbonate housing and lens. Surface mount with flange. Accepts standard 3-prong plug. Great Prices for the best trailer lights from Optronics. LED Trailer Tail Light w/ Reflex Reflector - Stop, Tail, Turn - Submersible - 10 Diodes - Red Lens part number STL43RBX can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (50)
  • Q & A (0)
  • Photos

Optronics Trailer Lights - STL43RBX

  • Tail Lights
  • Round
  • LED Light
  • Red
  • 4 Inch Diameter
  • Surface Mount
  • Rear Reflector
  • Stop/Turn/Tail
  • Submersible Lights
  • Optronics

5-3/4" Diameter round. 3-Function, waterproof LED light acts as a brake, tail, and turn signal. Built-in reflex reflector. Durable polycarbonate housing and lens. Surface mount with flange. Accepts standard 3-prong plug.


Features:

  • Round LED trailer tail light serves 3 functions
    • Stop light
    • Tail light
    • Turn signal light
  • Built-in reflex reflector removes the need for a separate reflector
  • Sonically sealed, waterproof housing and lens unit is submersible
  • LEDs make great replacements for incandescent lights
    • Last 50 times longer
    • More efficient - provide brighter light with less power output
    • No bulbs to replace - no brittle filaments
  • Durable polycarbonate lens and housing
  • Red lens over clear LEDs
  • Compatible with 12V DC systems
  • Surface mount with built-in flange - hardware not included
  • Accepts industry standard 3-prong plug


Specs:

  • Dimensions: 5-3/4" diameter x 1-5/8" deep
  • Distance between mounting holes (center on center): 4-7/8"
  • Diodes: 10
  • Power draw:
    • Stop: 0.413 amps at 12.8 volts
    • Tail: 0.026 amps at 12.8 volts
  • Lifetime warranty on LEDs


Optronics STL43 Reflex Flange Series LED Tail Light Dimensions

Sonically Sealed, Waterproof Trailer Light

The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.



STL43RBX Optronics LED Combination Trailer Tail Light w/ Reflex Reflector - Stop, Tail, Turn - Submersible - 10 Diodes - Round - Red Lens

Alternate part number: STL-43RBX




California residents: click here


Customer Satisfaction Score:


Customer Reviews

LED Trailer Tail Light w/ Reflex Reflector - Stop, Tail, Turn - Submersible - 10 Diodes - Red Lens - STL43RBX

Average Customer Rating:  4.9 out of 5 stars   (50 Customer Reviews)

5-3/4" Diameter round. 3-Function, waterproof LED light acts as a brake, tail, and turn signal. Built-in reflex reflector. Durable polycarbonate housing and lens. Surface mount with flange. Accepts standard 3-prong plug.

by:

updated our motorhome from the old square type with bulbs to these round type led lights and could not be happier..bright and a more modern look...highly recommended

Ray

11/27/2017

perfect product



by:

I have a Newmar coach which I had a LED taillight that burnt out. I called Newmar and checked several other suppliers but no one had the one I needed. I then logged on to etrailer.com, found the exact match, ordered and received it. I’ve used etrailer in the past for towing related items but they will be my first shopping stop for all my RV needs.



by:

Part received as ordered. Timely! Now installed and working. Thanks



by:

Quick, right part! oh! it fits and works! Thanks



by:

It was very costly just for a lens , and the time it took to receive the item was not satisfactory.



by:

Very bright & well made, I replaced these on my class A RV, the OEM manufacturer used them on the original build in 2014, replaced with a new set in 2020 and couldn't be happier knowing every thing behind me on the road sees me stopping, turning, whatever... Very good - quality product! Highly recommended. To be clear, I purchased these myself at full price from eTrailer!

John K.

4/17/2022

Update after 12months of use: Product still working as well as they were from day 1, still highly recommended...



by:

Direct replacement for one exactly like it Same brand and all, although the original lost a few LED's It makes me wonder how good these lights really are..

Etrailer Expert

Sierra K.

12/15/2021

I am unsure if your trailer used Optronics Brand LED Puck lights, but one thing is for sure these lights have a lifetime warranty for LEDS!



by:

I have a 2008 Discover America 5th wheel. One of the led tail lights had several burned out LEDs. This replacement worked perfect although the light pattern is slightly different.



by:

Have found and purchased some of those hard to find items through etrailer. Found this LED tail light for my Newmar RV. Exact replacement. Delivery on time and no issues, will continue to purchase again from etrailer



by:

I bought this for my Newmar motorhome. It was a perfect fit for the old light that had only a couple of LEDs still working. It has been working flawlessly for a year now and still looks new. Highly recommended.

Duncan H.

1/25/2021

Still working great after two years.



by:

Product easy to find on website. Reasonably priced and shipped as promised.
I purchase all Optronics lamps from ETrailer.
Only problem is this product is under the 4" lamps and outside diameter is actually 5 3/4". But was still easy to find.
Great customer service when and if you need to call them.



by:

Worked perfectly! Thank you :)

Elizabeth

12/30/2022

The light assembly is still working great!



by:

Mid-understood flange. Had to cut fiberglass. No big thing. Also needed to purchase electrical connectors. Would have helped if more needed info was addressed



by:

Reasonably priced . After having them on for one year no problems. An led tailight will at 65 miles per hr illuminate an average of a car behind you seeing them come on 50feet sooner.



by:

We’re upgrading a 1960 camper with LED lights throughout. These work wonderfully and are very easy to see. Good price, great service and product, highly
recommended.



by:

Spent over 8 hours looking for these same exact lights before I put my bus on the road for inauguration. Went to dozens of bus dealers, and part vendors, but i couldn't even find similar. Even called the manufacture, but they advised since i wasn't a distributor, they couldn't sell to me directly, neither did any of there distributors have it. Make a long story short, etrailer saved my butt!



by:

I found the web site easy to navigate and had the EXACT light I needed.
The cost was quite reasonable, and shipping was quick.
Thanks.
I WILL be ordering more, now.



by:

Exactly what was needed for a very good price. Easy to install. Good seal to prevent water entering. As usual, etrailer.com solved the problem.



by:

Exactly what I needed. Worked perfect and will brighten up my trailer to be seen at a good distance.Thanks



by:

great experience with etrailer for first time customer.



by:

Fast delivery. Works like new.

Gordy A.

8/9/2018

Still working perfectly.



by:

the light was the correct fit, I received it much sooner than I expected. This was the second time I have ordered from them and quicker.



by:

I could not immediately find the part online and I had to ask a bus repair facility to find your website. Once I found your website, it was a breeze to find the right part and to place an order. The website is very well constructed and it was very easy to use.

Thank you for the great and timely service.



by:

Took old one out. This one for in with no adjustments needed. Works great.



by:

Very quick delivery. Items were in good condition and were the correct parts. Company very easy to work with.


25
50
Show More Reviews

See what our Experts say about this Optronics Trailer Lights

  • Dimensions of the Mounting Holes of the LED Trailer Stop/Turn/Tail Light # STL43RBX
    I went and pulled a LED Trailer Stop/Turn/Tail Light # STL43RBX from our warehouse and measured the mounting holes and found them to be 4-1/4 inches apart. Of the lights we carry this will be the closest matching LED light to what you have.
    view full answer...
    Image 1 for
  • Diameter of Hole Needed to Install the LED Trailer Stop/Turn/Tail Light # STL43RBX
    To install the # STL43RBX you'd need a hole diameter right at the size of 4-7/8 inches as that is the diameter of the portion of the light that would need to insert into the hole. The overall diameter is 5-3/4 inches. For a pigtail harness to wire up this light you then would want the part # A45PB.
    view full answer...
  • Is the Back of LED Trailer Stop/Turn/Tail Light STL-43RBX Exposed or Sealed
    The back of LED tail light # STL43RBX is exposed but the circuitry and diodes are sealed to prevent water from getting in and shorting out the light. This light uses a plug such as # A47PB so what you would want to do is use some dielectric grease # LT37534 on the pins before plugging it into the light. The grease will repel moisture and help prevent corrosion.
    view full answer...
  • Installing Trailer Tail Lights with Two Wire Connections on 4-Way Wiring
    They are single function lights, so they can be used as running lights or stop/turn but not both. So for your trailer to be legal, you will need to run two on each side, one for the running light (brown wire of your 4-way) and one for the turn/stop light (green or yellow wire of your 4-way depending on side of the trailer). You will attach the power wire (green, yellow, or brown) to the red wire of your light. The white wire on your light will go to ground, so you will attach it to the...
    view full answer...
    Image 1 for
  • Comparing Pedestal Mount and Surface Mount Trailer Lights
    The majority of pedestal mount lights like the Optronics Round Trailer Tail Light part # ST51RB ground though the mounting hardware and the majority of surface mount lights like Optronics Round Trailer Tail Light part # STL43RBX ground with a single wire. That said, there are pedestal mount lights that ground with a single ground wire and surface mount lights that ground through the mounting hardware. The best one for you will really just be preference as there is not really a standard...
    view full answer...
  • 4 Inch Round Tail Lights with Reflective Lens
    I do have an option for you but the Fusion LED Trailer Tail Light part # STL201RB does not have a reflective lens. I looked through all of our other 4" round tail lights and none of the ones with the included reverse light have a reflective lens. Therefore, the best option we can offer you is to separate the tail light and reverse light housing with the LED Trailer Stop/Turn/Tail Light part # STL43RBX and LED Trailer Backup Light part # BUL11CBX. These are both 4" round LED lights with...
    view full answer...
  • Mounting of Optronics 4 Inch Round Tail Light
    The Optronics Tail Light # STL43RBX does not need a bracket for mounting. It has a built in flange and includes a rubber grommet. The light can be connected using a 3-wire pigtail, # A45PB, or # A47PB for a right angle.
    view full answer...
  • Available Sizes of Round Trailer Tail Lights
    We do not have an exact 2-1/2-inch match to the GloLight LED Trailer Tail Light # STL101RFB which has a 4-inch lens diameter and an overall diameter of 5-1/2-inches but we do offer other a lot of roughly similar round red lights, both LED and incandescent, that you can see on the linked page. GloLight LED Trailer Tail Light # STL101RFB is a recessed-mount type that requires a mounting hole, but among the other options are that type as well as pedestal-mount lights like incandescent model...
    view full answer...
  • Surface Mount Trailer Clearance Light Availability
    For what you are looking for a surface mount light like the part # STL43RBX would probably be a better option as it doesn't require a bracket and it does stick out a little bit.
    view full answer...
  • Does Sealed, 4" Round LED Trailer Tail Light STL42RB Also have Reflectors
    Trailer tail light # STL42RB has reflective properties but I recommend # STL43RBX. The mounting ring around this light is a reflective lens rather than just a black ring like with # STL42RB. I also recommend wiring harness # A47PB to plug into the back of the light.
    view full answer...

Do you have a question about this Trailer Light?


Info for this part was:

Employee Tyler C
Written by:
Tyler C
Employee Michael H
Expert Research:
Michael H
Employee Brian T
Updated by:
Brian T

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.