LED 1157 Light Bulbs For Converting Peterson Trailer Tail Lights 432000 & 431800 From Incandescent
Question:
I have a trailer with lights similar to etrailer Peterson Trailer Tail Light - 4 Function - Incandescent - Round - Red Lens Item # 432000. I want to keep the housing, but change out the red lens with a LED light stop/tail/signal? Is there something that will work?
asked by: Rick L
Expert Reply:
I recommend replacing your Incandescent Bulbs # DI79VR on your Peterson Tail Lights # 432000 & # 431800 with LED Bulbs # CM93236. There is currently not a LED light that will bolt in place of your current Lens # 420-15 on your tail lights. These LED bulbs have a 2,000 hour bulb life.
Products Referenced in This Question
Replacement Red Lens for Peterson 3-3/4" Round Stud Mount Tail Lights
- Accessories and Parts
- Trailer Lights
- Light Lenses
- 3-3/4 Inch Diameter
- Round
- Red
- Peterson
more information >
Peterson Trailer Tail Light - Stop, Turn, Tail - Incandescent - Round - Red Lens - Passenger Side
- Trailer Lights
- Tail Lights
- Stop/Turn/Tail
- Round
- Surface Mount
- Non-Submersible Lights
- Incandescent Light
- 3-3/4 Inch Diameter
- Red
- Peterson
more information >
CIPA EVO Formance 1157 Round LED Bulbs - Ultra White - Qty 2
- Off Road Lights
- Replacement Bulb
- LED Light
- Pair of Lights
- EVO Formance
more information >
1157 Incandescent Bulbs - Double Contact Bayonet - 8 Watt - Soft White - Qty 2
- Vehicle Lights
- Interior Light
- Marker Light
- Dome Light
- Side Marker
- Pair of Lights
- Incandescent Light
- Replacement Bulb
- 1157
- White
- Diamond
more information >
Product Page this Question was Asked From
Peterson Trailer Tail Light - 4 Function - Incandescent - Round - Red Lens - Driver Side
- Trailer Lights
- Tail Lights
- License Plate
- Stop/Turn/Tail
- Round
- Surface Mount
- Non-Submersible Lights
- Incandescent Light
- 3-3/4 Inch Diameter
- Red
- Peterson
more information >
Continue Researching
- Q&A: Solution for Replacing Dexter 8-222 Trailer Hubs and Bearings
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Article: Trailer Wiring Diagrams
- Q&A: How To Use 17.5" Wheels On a 7,000 Lb Trailer Axle
- Q&A: Bearing Kit for Horse Trailer with Bearing ID of 1.25 1.75 and Seal 2.25 inch
- Q&A: Replacement for GDC120 Actuator for Heritage Triple Axle
- Q&A: How to Determine Correct Replacement Ceramic Kodiak Brake Pads
- Q&A: Replacement Grease Seal for a 168255TC Rubber Coated Seal
- Article: Jump Starting Your Vehicle
- Article: Trailer Lighting Requirements
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)