4-1/2" x 2-3/16". Incandescent trailer light serves as a clearance and side marker light. Vibar socket absorbs road shock and vibration. Durable steel housing. Surface mount - hardware not included. 1-Wire design. PC rated. (1) 168 bulb.
Features:
Specs:
Manufacturer Cross Reference
Light will work as an exact replacement for:
Truck-Lite # 26315R
Optronics # MC82RB
Grote # 45172
A PC-rated light produces a 90-degree angle of light to either side of its centerline for a total of 180 degrees of coverage. This beam pattern can be clearly seen when you are standing directly in front of the light, as well as when you are standing on either side of the light. When properly installed, this type of light can function as both a front clearance light and a side marker light or as a rear clearance light and side marker light.
Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a small, often pre-existing hole, for wiring. Mounting hardware is used to secure the light to the trailer.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we'll be taking a look at a Peterson Armored Clearance and Side Marker Trailer Light. Now, this is going to help your trailer to stay visible and DOT complaint by giving you that clearance and side marker light for your trailer. It's housed in the durable steel bracket. So, it's going to keep our light protected and also sort of finish off the look and make it look sort of more beefy than your typical lights.It has an incandescent bulb in there. And to replace that, you'll just need to back out these two screws on either side to get access to that bulb. This works with 12-volt DC systems.
And it does just have one wire to connect to the back. Our ground is made by the rest of the housing. So, as long as this steel plate makes contact with your trailer it'll ground out the light.Inside you can see we'll have a v-bar socket. That's sort of a rubbery type socket, helps to absorb the road shock and help prevent that bulb from shaking around and failing prematurely. So, it's going to extend the life of that bulb, so you don't have to worry about changing it out anytime soon.
That bulb type is one-six-eight or 168. It's a pretty common bulb that you can find just about anywhere.To replace our red lens, just pop that back over. So, if anything ever happens to that lens, it's also pretty easy to replace. Put our brackets, and our screws back down. Just want to make sure that that bracket's going over the lip of the lens so that it holds it in place securely.
Then we'll do the same thing for that other side. And once I get this back in place, we'll go over some measurements.This light is PC rated, which basically means that you can see it from both head on and from the side. So, that's how it can work as a clearance and a side marker light at once. Just as long as it's mounted properly.When it comes to the length, go to the back here. It's going to be about four and a half inches long by about two and a quarter inches wide, maybe a little bit more than two and a quarter.
It's about one and a quarter inch deep. And our two mounting holes will be these two. They're diagonal from each other, but the distance side to side is about three and three-eighths inches. And the diameter on those holes is about three-sixteenths.We'll have our one wire to connect at the back, which will be our power wire. So, I'm going to connect that to my power source here, so we can take a look at how bright this is. And then I'll ground out to that bright plate steel housing. Light comes on. Turn down the lights in the studio, you get a better idea how bright that is. So, it's not terribly bright, but it'll definitely keep you DOT compliant. You can still see that light is on even from the side. So, it stays visible and gives us that PC rating.Turn my power off. The power draw at 12-volts for this light is 0.35 amps. Again, it is DOT compliant, made in the USA. And this is going to work as an exact replacement for the Truck Lite number 26315R. The Optronics number MC82RB. And Grote number 45172.And that's going to do it for our look at the Peterson Armored Clearance and Side Marker Trailer Light.
Average Customer Rating: 4.8 out of 5 stars (24 Customer Reviews)
4-1/2" x 2-3/16". Incandescent trailer light serves as a clearance and side marker light. Vibar socket absorbs road shock and vibration. Durable steel housing. Surface mount - hardware not included. 1-Wire design. PC rated. (1) 168 bulb.Easy to install, needed sheet metal screws and an electrical coupler. And should have Phillips and drill handy for sheet metal screw mounting. Theses things are tough.
Exactly as ordered, shipped same day. Arrived on date promised. Perfect service.
This is a classic American product: tough, effective, and reasonably priced. They are to be replacements on a flatbed I am installing on another truck. So that they fit is definitely a bonus.
Yet I'm looking also to increase efficiency with LED bulb equivalents. This is not easy to do because most of these fixtures have bulbs so well shock mounted and with bulbs that last so long replacements are not a priority. eTrailer did a fine job of putting me in touch with people at Peterson who can provide the necessary specifications.
Shipping was fast. Packaging was fine. No complaints.
Great product for the price. Shipping was fast
I have a horse trailer whose rear doors would occassionally swing open, flex past their stops and break the clearance lights. No more with these armored lights! So durable they should be on military tanks!
Easy ordering online. Very quick to get it shipped, then your in fate of UPS, USPS or FedX to how quick you get it. I was happy with my time frame.
I had a hard time finding a metal framed side marker light that came close to matching the other one I have on other side of truck. But this is very close & you can't see them both at the same time anyway.
I haven't got around to installing it yet, but very happy with the quality of the light so far!
this was great it match and installed in place , it work that was good, the shipping work out also very timely, etrailer works for me it save me time and the running around trying too fine these parts thanks etrailer,,,,,
They work, and they are just like the ones these replaced so they match up to the mounting location. But they are expensive for a little metal and plastic.
This was an exact replacement for what was on the truck it was for. The pictures on the website were great in helping me identify the right product.
Good solid peace. Wires could be longer.
These are just what I wanted for my customers trailer. He is very pleased with the products and can't wait for me to get it all together so he can start using the trailer. What was on there before was total junk. Half worked and half didn't.
Great company!
Worked as it should. Very fast shipment.
It's a marker light for a trolley .
Easy to install The metal frame will really help tree limbs out in the pasture. Lights are really bright
Excellent product. Perfect for my old Ford flatbed.
Looks like very nice quality.
well built light and fair price more than satisfied I purchased four of them
Appears to be quality made and very sol id
Great product for the price. Shipping was fast.
Excellent Service!!!
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.