Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
3-5/16" x 1" Rectangle. Incandescent trailer light serves as a clearance, side marker, or identification light. Durable steel base with snap-lock lens. Surface mount - hardware not included. 1-Wire design. PC rated. (1) 194 bulb.
Features:
Specs:
Manufacturer Cross Reference
Light will work as an exact replacement for:
Truck-Lite # 1507
Grote # 46882
Optronics # MC11RB
Primatronics # PT2640R
A PC-rated light produces a 90-degree angle of light to either side of its centerline for a total of 180 degrees of coverage. This beam pattern can be clearly seen when you are standing directly in front of the light, as well as when you are standing on either side of the light. When properly installed, this type of light can function as both a front clearance light and a side marker light or as a rear clearance light and side marker light.
Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a small, often pre-existing hole, for wiring. Mounting hardware is used to secure the light to the trailer.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we'll be taking a look at the Peterson Mini Light clearance and side marker trailer light. This is going to be a rectangular incandescent trailer light bulb. We'll have our housing which provides us with the ground connection there whenever we put in our hardware. Then we'll have our wire to connect to the back.Has just a plastic base. It's compatible with 12 volt DC systems and then it just surface mounts to your trailer. These little notch cut out and that bracket's for our wiring can go out couple different ways here.
And it's not going to crush it or cause any issues.Now the hardware to get this mounted up is not included so you will have to pick some on your own, whether that's a nut and bolt or a self tapping screw. It is DOT compliant and PC rated which basically means that it can be seen both head on and from the side and still be effective when mounted properly.I'm going to connect this to a power source so we can get an idea of how bright this will be. Turn on my power here. You can see our light comes on. Turn out the lights in the studio and you get a better idea of how bright that is even in low light.
Still visible even from the side. Not super bright but bright enough to be effective.The bulb type inside there is a 194 or 193, either one of those bulb types will work. To get into that housing, you just need to pry back on this white tab which I think I can just do by hand and then that will release the side of the lens and then we can do that on the other side. My right hand is a little stronger. There we can pop that off.
Then you just wiggle that bulb out to replace it. And as you can see on the side of bulb it has 193 stamped on there. It might be a little hard for you guys to see that on camera but there it is. To get that back in place, just going to put that lens back over, snap it down into place.Now as far as dimensions, our bracket overall, flip that around, is about 3-1/4 inches long. From the center of each of those mounting holes to the center of the other, it's about 2-3/4 inches.
The lens just for fun, is about 1-3/4 inches long. The width is right about an inch. And then the overall height is about 1-1/8 inches tall. The wiring coming off our light is just about 7 inches long.Our power draw at 12 volts will be 0.25 amps. It comes with a one year limited warranty from Peterson and this does work as an exact replacement for the truck light number 1507, the Groat number, 46882, Optronics number, MC 11RV and Primatronics, part number PT2640R.That's going to do it for our look at the Peterson Mini Light clearance and side marker trailer light.
Average Customer Rating: 4.9 out of 5 stars (29 Customer Reviews)
3-5/16" x 1" Rectangle. Incandescent trailer light serves as a clearance, side marker, or identification light. Durable steel base with snap-lock lens. Surface mount - hardware not included. 1-Wire design. PC rated. (1) 194 bulb.
These little marker lights are great. I use them on my flatbed 16'. I have tried other lights but bumping down the road knock the filaments out , but these have done very well, Thanks
Perfect fit replacement for the aged, cracking lights on my enclosed trailer.
Replacement trailer lights. Easy to install. I love this site for replacing trailer parts. It's easy to find what I am looking for, prices..including shipping are good and it's quick.
This is the only place i could find this light. Good job. Fast service, good price, it matches the rest of the lights on my Donahue trailer. I will order from you in the future. Thank You
Boyd
3/12/2019
great a perfect replacement
The product was as described, the lenses are in there pretty tight but still held in by a couple of locking tabs on each of the long ends, much like a lot of traditional lights are... it is a pretty durable lens though.
These ground off of the metal tab sticking out to the base and I drilled and tapped the mounting holes on the trailer with #10-24 tap which is about as big of a bolt/screw that you can get in the light's mounting base holes... 1/4" was too large to fit in the holes without any modifications to the light's base.
Exact replacement just as stated. Shipping was fast and arrived well packaged.
Terry
6/12/2020
PRODUCT IS GREAT AFTER A YEAR OF USE
I'am happy with the item I bought , but un- happy with the way the post office shipped the items I buy it does not make any sense it went to Kansas then georga then baton rouge la. then Jackson la. this is STUPID on the shipping.
I ordered seven front lights seven rear lights and7 tail lights and a tag light. All of them were thrown in the box and we’re scratch on shipping. None of it was Wrapped 1
Fast shipping...perfect match for my hard to find trailer light! Very reasonable price...Thanks so much!
etrailer.com , is there really another choice, they have it all, plus great savings, KEEP UP THE GREAT WORK !
Great dealer, good prices and quick delivery and perfect replacement for my trailer.
Perfect replacement for our 1996 Circle J horse trailer.
Perfect replacement for the lights broken by hail.
Just what I needed as I'll use the 3 for the identification lights in the very back of the trailer.
a perfect replacement for my damaged li ghts
Exact fit for the lights I was replacing. Perfect fit!
Awesome deal product arrived on time and is exactly what I needed
Thanks Guys
This is an excellent light to replace the originals as the origionals become fragile from age.
Work perfectly and look good
Excellent service fast shipping!!
What can I say? Great communications, well packaged and fast delivery!
You will be hearing from me again!
Great product & a great price!
Rapid economy delivery. Good transactio n.
is as described
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Mike G.
9/7/2018
Hi george: still works great. Than you for following up.