4" x 2-1/16". Incandescent trailer light serves as a clearance or side marker light when properly mounted. Built-in reflector. Surface mount to trailer - hardware not included. 2-Wire design with 0.156 female barrels. P2 rated.
Features:
Specs:
A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there. I'm Michael with etrailer.com. Today, we're gonna take a quick look at this incandescent amber trailer clearance or side marker light. This is a D.O.T compliant four inch long by two and approximately two and one sixteenth of an inch tall and about one and three, thirty seconds of an inch deep incandescent trailer light. And that is going to serve as either a clearance light or a side marker light depending on how you have it mounted. So this is P2 rated, which means that it will produce a 45 degree angle of light to either side of the center line for a total of 90 degrees of coverage.
This beam pattern can be seen straight on but it is harder to see from the side. So it can be used either as a side marker light or as a clearance light but it cannot function as both simultaneously. Now this is gonna have a built in reflector that is going to remove the need for a separate reflector. The amber snap on acrylic lens does cover your incandescent bulb. That is an incandescent 1 94 bulb inside there.
So it is gonna be very easy to replace. Just pop off the lens, pull out the current bulb put in the new one. Anytime you need to replace it on the back we do have this durable A.B.S plastic housing. It is gonna be a surface mount installation. The hardware to get it mounted is not included.
Again, just pop off the lens. You'll put your hardware through the distance between our mounting holes here. It's right at three inches center to center. This is going to have a two wire design with the .156 female barrels. It is gonna be compatible with your 12 volt DC systems.
It's only gonna draw about 0.2 amps on your 12.8 volt system. So if you are looking to replace either your trailer clearance or your amber side marker light this is gonna do a great job for you. That completes our look for today and again on Michael with etrailer.com. Thanks for watching..
Average Customer Rating: 5.0 out of 5 stars (7 Customer Reviews)
4" x 2-1/16". Incandescent trailer light serves as a clearance or side marker light when properly mounted. Built-in reflector. Surface mount to trailer - hardware not included. 2-Wire design with 0.156 female barrels. P2 rated.Perfect fit, bright, easy hookup. I kinda bumped a tree and took out the ones on my trailer. These work!
Great price,quick service,what's not to like.Will be using again.
Part worked great! Fast shipping
Great replacement for the originals! Very nice and bright!
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.