Summer Starts Here - Save up to 70%
2-3/4" x 1-1/8" Rectangle. Low-profile, trailer light functions as both a clearance light and a side marker light when properly mounted. Durable polycarbonate base and red acrylic lens. Surface mount. 2-Wire pigtail. PC rated.
Features:
Specs:
A PC-rated light produces a 90-degree angle of light to either side of its centerline for a total of 180 degrees of coverage. This beam pattern can be clearly seen when you are standing directly in front of the light, as well as when you are standing on either side of the light. When properly installed, this type of light can function as both a front clearance light and a side marker light or as a rear clearance light and side marker light.
Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a small, often pre-existing hole, for wiring. Mounting hardware is used to secure the light to the trailer.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today, we're gonna take a look at the Hot Dot red rectangle LED clearance and side marker light. Now, this small, rectangular trailer light will function as both a clearance light and a side marker light when properly mounted. It does use LEDs, which make great replacements for incandescent lights. They last about 50 times longer. They are more efficient, provider broader light with less power output, and there's no bulbs to replace, or no brittle inaudible 00:00:22. It is a red lens with red LEDs.
It is designed to mount on the surface of the trailer.Now, the hardware to install this is not included. I'll show you. It's a two-wire pig tail. It includes both the power lead, which is the red wire, and the ground wire, which is the white wire. Now, this light does meet the P2PC rating.
It is assembled in the USA. A few measurements on this, the overall dimension, let's turn it this way. Edge to edge is right at 2 3/4" long. The height of it is right at 1 1/8" tall, and the total depth on it at the widest point is about 1/2". Now, the distance between the two mounting holes center to center is right on 2".
The wire length on these pig tail wires is 5 1/2", and it contains two diodes.So, what I'm gonna do now is just hook it up to our 12-volt power just to show you how bright it is. We're gonna take our ground wire, hook it up to the white wire, and then we'll go ahead and take our power, hook it up to the red wire. We'll go ahead and turn on our 12-volt power. You can see our lights come on. I'm gonna go ahead and turn off the overhead lights, and there you go.
You can see the bright light it gives off for a clearance or side marker light. I'll go ahead and turn back on our overhead lights, disconnect it.But that should do it for the review on the Hot Dot red rectangle LED clearance and side marker light.
Average Customer Rating: 4.5 out of 5 stars (31 Customer Reviews)
2-3/4" x 1-1/8" Rectangle. Low-profile, trailer light functions as both a clearance light and a side marker light when properly mounted. Durable polycarbonate base and red acrylic lens. Surface mount. 2-Wire pigtail. PC rated.Parts are exact fit as I led parts
Still working after one year
Exactly what I needed fit my motorhome perfectly. And it arrived when I needed it. I have always had a good experience with you. Thanks.
matches old lights
right light fast shipping
Product received in great condition, installed without any issues. Will provide feedback on longevity of product over time. Very pleased thus far.
Great price!!
I ordered 5 replacement amber marker lights as I only needed one light. I order 5 lights so all would match to find out 4 of the 5 are defective. Maybe someone should test the lights before shipping them.
All parts are exact fit as old parts
Perfect match for my 2010 Tiffin Phaeton MH clearance light. That was a real concern because it sits next to four others. Very happy.
We needed a trailer side marking light before we left for vacation. Etrailer had the exact light we’d been looking for! We ordered and paid for fast shipping and it arrived as expected! Online ordering was easy and shipping was as expected! Would definitely order from etrailer again!
Exactly what I wanted. Fits perfectly. Great site for the hone RV handyman. Keep up the good work and great service
Just the item I was looking for and now after one year they still look new and work great thank you etrailer
I have bought 2 maker lights everything works great.
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.