Identification Light Bar for Trucks and Trailers - Incandescent - White Steel Base - Red Lens
(64 reviews)
Price: $15.02
In Stock
Identification Light Bar for Trucks and Trailers - Incandescent - White Steel Base - Red Lens
Item # MC99RB
Retail:$16.96
Our Price: $15.02
You Save: 11%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (64)
- Q & A (0)
- Photos
Optronics Trailer Lights - MC99RB
- Clearance Lights
- ID Bar
- Incandescent Light
- Red
- 16-3/4L x 1-3/8W Inch
- Surface Mount
- Rear Clearance
- Non-Submersible Lights
- Optronics
16-3/4" Long x 1-3/8" tall x 1-1/4" thick. Waterproof, incandescent identification light bar is designed for trucks and trailers. Durable steel base with white finish. Surface mount. 1-Wire design. P2 rated. (3) 194 bulbs.
Features:
- Red light strip functions as identification light bar for trucks and trailers
- Light bar has three replaceable MC11RB lights attached to base
- Sealed, waterproof housing and lens unit
- Incandescent bulbs can be easily replaced
- Durable steel housing with white finish
- Red lens over incandescent bulbs
- Compatible with 12V DC systems
- Surface mount to trailer - hardware not included
- Single wire design grounds through mounting hardware
- P2 rated
Specs:
- Dimensions: 16-3/4" long x 1-3/8" tall x 1-7/16" deep
- Distance between mounting holes (center on center): 6"
- Power draw at 12.8 volts: 1.0 amps
- 3-Year warranty
Manufacturer Cross Reference
Light will work as an exact replacement for:
Uni Bond # LB1020R
Grote # 49112
Peterson # 107-3R
P2-Rated Lights
A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
MC99RB Optronics Identification Light Bar for Trucks and Trailers - Incandescent - White Steel Base - Red Lens - P2 Rated
Alternate part number: MC-99RB
California residents: click here
Customer Reviews
Identification Light Bar for Trucks and Trailers - Incandescent - White Steel Base - Red Lens - MC99RB
Average Customer Rating: 4.8 out of 5 stars (64 Customer Reviews)
16-3/4" Long x 1-3/8" tall x 1-1/4" thick. Waterproof, incandescent identification light bar is designed for trucks and trailers. Durable steel base with white finish. Surface mount. 1-Wire design. P2 rated. (3) 194 bulbs.by: Ray 08/16/2022
Identical to the old one perfect match never thought I would find one for my horse trailer
by: Sheena S01/06/2017
Excellent quality. Beautiful product. I bought this light to for my horse trailer. A lens on the existing light broke somehow. I did not even realize until I removed the original light that it was actually in horrible shape to begin with. When I received this new light, the size in dimensions were exact with the old one but it was so much better looking overall that i was actually glad that the original one broke! My trailer looks so much better now and for such a low price!!!
by: Zoeann02/07/2024
Just as expected and works great.
by: Joel01/16/2022
Very good product and I'm very happy to have bought it from etrailer. Bought it from other companies in the past and it didn't work for very long but this one has been really good
Joel
2/21/2023
Happy that I bought this product.
by: David 08/16/2023
Had the product that I wanted and shipped out promptly
by: Wendy07/17/2019
Recently, we had a horrible hail storm that damaged several of our horse trailer lights. We ordered your light bar for the top back of our trailer. It arrived very quickly and was tremendously easy to install. Trailer looks top notch again...thanks a million!!
by: Douglas05/17/2017
The product was the exact replacement for my landscape trailer. Two screws and a couple wire nuts and your done.
by: Richard L.07/22/2016
This replacement for my utility trailer was perfect. The exposure on the trailer means frequent replacement of the lens, but on occasion I need to replace the whole unit. This item is cost efficient, works just like the original and shipped instantly. The long wire left plenty for wiring. Very happy, etrailer always comes thru.
by: Carl07/27/2019
Advertised as exact replacement for Peterson PM 107-3, but it is not. The skirts on the Peterson light bar are 3/8", but the skirts on this are 3/16". Looks like a cheap foreign copy. The mounting holes are the same, which is a good thing.
by: Marcy02/01/2020
Prompt, quality merchandise, how to videos to help with installation. We were very pleased with our purchase and highly recommend etrailer.com. Thank you!
by: Guy11/13/2013
Great transaction. Wide selection, excellent pricing. All items were direct replacements and equal to OEM quality. Super fast delivery.
Highly recommend, only place I will buy trailer replacement parts.
by: Reg 05/12/2020
The lights I ordered were as advertised. The quality was very good and the price was very reasonable. I replaced the top lights of my stock trailer.
by: Paul B.06/18/2014
Great product. Connect the power wire, attachment screw into metal provides the appropriate ground and you are Good to Go!!
by: Dave G.03/31/2015
This is the final light for may horse trailer. Exactly what I wanted and neede for my project.
by: Taylor Westbrook09/25/2013
Great products! I was very pleased with the quickness of shipment and the above average communication. Well done etrailer.com!
by: Anthony P 02/07/2017
Ordered some parts for my car hauler and everything is as described. The quality is great and the communication from online ordering through the delivery updates was top notch customer service.
by: Pablo04/20/2015
Nice item, lights up beautifully (once I hooked it up properly), and a VERY REASONABLE price. Makes my "El Cheapo" trailer look like a million bucks (especially at night).
by: Dennis H01/30/2014
Clearance light was good quality easy to install. Very good service.
by: Dusty T. 04/22/2017
On point, order delivery and quality. All future purchases will definitely be through etrailer.
by: Douglas06/17/2018
My shipment arrived ahead of schedule and well packaged. Didn’t take long to install replacement part. I highly recommend etrailer!!
by: Donald 06/26/2021
Perfect match for my old broken light b ar!
by: Don K10/12/2016
Super quick free delivery!! Every thing looks in good condition.
Will buy from you again when I need quality trailer parts!
by: Sandy P.12/11/2010
Exact replacementTheses were an exact replacement. Solved the problem, I painted the light to retard rust.
The metal is thin and the white paint doest appear to be enough protection. I sprayed it with Rustoleum I had in the garage.
Finish is much better and should last longer.
by: Glen05/10/2013
Great product and service.
Glen D.
5/10/2014
Product still looks and works great.
by: Jesus12/14/2016
Easy to install, great quality, still working after one year of use.
25
64
Show More Reviews
See what our Experts say about this Optronics Trailer Lights
- How to Replace Bulbs of the Truck and Trailer Identification 3-Light Bar with White Base # MC77RBThe red lens cover of the # MC99RB has two clips on either side of it from the base of the assembly that hold the lens on. If you push those two clips out the lens can be pulled off and you can use a replacement bulb part # A194B to replace the burned out bulb.
view full answer... - Replacement Lens Availability for Identification Light Bar for Trucks and Trailers # MC99RBYes we do carry replacement lenses for the # MC99RB with the part # A11RB.
view full answer... - Replacement Clearance Lights for Gooseneck Brand TrailerThe UltraThin ID Light Bar for Trailers over 80" Wide - Submersible - 3 Diodes - Red Lens # MCL70RB is 15" Long x 1-3/8" tall x 5/8" deep. This is probably the most similar option but there isn't an amber options for this one. The 3-Light Truck and Trailer Identification Light Bar with White Base - Amber # MC99AB is 16-3/4" long x 1-3/8" tall x 1-7/16" deep will match the Identification Light Bar for Trucks and Trailers - Incandescent - White Steel Base - Red Lens # MC99RB.
view full answer...
- How to Wire Sealed, 3-Light Truck and Trailer Identification Light Bar, # MC99RBThe Sealed, 3-Light Truck and Trailer Identification Light Bar, # MC99RB, is designed to tap into the running light circuit on the trailer wiring. If you have tail lights that have an output for an auxiliary running light, it could be attached to it. Otherwise, you will need to tap into the running light wiring that runs to one of the tail lights. Adding additional lights may cause an excessive power draw on the wiring system. This can cause the trailer lights on the trailer to not function...
view full answer... - Replacement Lens Recommendation for Trailer Clearance Lights MC11RB and MC99RBFor both the lights you mentioned of # MC11RB and # MC99RB we have the replacement lens part # A11RB as a confirmed fit.
view full answer... - Single Wire ID Light Bar for a Boat Trailer Over 80 Inches WideYour old ID bar must have grounded through its mounting hardware since it only had the one wire. ID bar # MCL97RB also has just one wire and grounds through the mounting hardware. This is an LED light so it will draw much less power than incandescent lights. If your boat trailer is aluminum though a jumper ground wire should be attached between the frame and mounting hardware and attached to a steel surface or the main trailer connector ground. A ground issue is why the other light was...
view full answer...
Do you have a question about this Trailer Light?
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jameson C
Video Edited:
Joshua S
Installed by:
Cole B
Updated by:
Wilson B
Updated by:
Brian T
Updated by:
Manda E
Updated by:
Carrie F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Ray
8/18/2023
One year later still works and looks great like new