Equalizer for 2-1/2" Wide Slipper Springs - Right Hand - 18-3/8" Long - 1" Center
(7 reviews)
Price: $133.03
Equalizer for 2-1/2" Wide Slipper Springs - Right Hand - 18-3/8" Long - 1" Center
Item # 10GDH-EQ42RH34
Our Price: $133.03
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (7)
- Q & A (0)
- Videos (1)
- Photos
Redline Trailer Leaf Spring Suspension - 10GDH-EQ42RH34
- Standard Equalizer
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 2-1/2 Inch
- 18-3/8 Inch Long
- Tandem Axle
- Triple Axle
- Redline
18-3/8" Long equalizer connects slipper springs on tandem- or triple-axle trailers and transfers impact between the axles to ensure that the load is evenly distributed. Fits springs with 3/4" diameter eye.
Features:
- Connects slipper springs on dual- or triple-axle trailers
- Attach one spring with bolt through the eye
- Slip arched end of other spring into equalizer
- Suspend equalizer from center hanger (sold separately)
- Transfers load and sudden impacts from one axle to another
- Distributes weight evenly
- Results in smooth ride for trailer
- Designed for use on trailers with 10,000-lb, general-duty Dexter axles and leaf springs with 3/4", rubber-bushed eyes
- Allows for 42-1/4" axle spacing
Specs:
- Fits: 2-1/2" wide slipper leaf springs
- Center bolt hole diameter: 1"
- Side bolt hole diameter (for mounting spring): 3/4" diameter
- Configuration: right hand
- Dimensions: see table
| Part Number | A | B | C |
|---|---|---|---|
| 10GDH-EQ42RH34 | 18-3/8" | 1" | 3/4" |
10GDH-EQ42RH34 Equalizer for 2-1/2" Slipper Springs - Passenger Side - 18-3/8" Long
Video of Equalizer for 2-1/2" Wide Slipper Springs - Right Hand - 18-3/8" Long - 1" Center
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Redline Trailer Suspension - Leaf Spring Suspension - 10GDH-EQ42RH34 Review
Speaker 1: Today we're taking a look at an equalizer for a two and a half inch wide slipper springs. When it comes to the configuration, this is designed for the right-hand side of the trailer. Now this equalizer connects slipper springs on dual or triple axle trailers. You attach one spring with a bolt through the eye on this end of the equalizer, and then slip the arched end of the other spring into the equalizer on this end. And then the equalizer is designed to suspend from a center hanger that would be mounted onto the frame. Center hangers are sold separately.
If you need some or need one, you can check on options at etrailer.com. This equalizer is designed to transfer load and sudden impacts from one axle to another, helps to distribute weight evenly, and results in a smoother ride for the trailer.This is designed for use on trailers with 10,000 pound general duty Dexter axles and leaf springs with three quarter inch rubber bushed eyes. It allows for 42 and one quarter inch axle spacing. Again, it does fit two and a half inch wide slipper leaf springs. The center bolt hold diameter is one inch, the side bold hold diameter for mounting the spring is three quarters of an inch in diameter.
Overall, edge to edge this direction, we're looking at about 18 and a half inches. Width measurement measures about three and one eighth inches. And then the height measurement is about five and one quarter. And that's going to do it for today's look at the equalizer for two and a half inch wide slipper springs.
Customer Reviews
Equalizer for 2-1/2" Wide Slipper Springs - Right Hand - 18-3/8" Long - 1" Center - 10GDH-EQ42RH34
Average Customer Rating: 4.4 out of 5 stars (7 Customer Reviews)
18-3/8" Long equalizer connects slipper springs on tandem- or triple-axle trailers and transfers impact between the axles to ensure that the load is evenly distributed. Fits springs with 3/4" diameter eye.by: Brian01/12/2022
The part sent was supposed to be for the right hand side of the trailer, and as pictured would have the square pin hole on the outside of the equalizer allowing for greasing of the spring eye bolt without crawling under the trailer. The part received had the square pin hole on the left or inside of the equalizer, and although able to be assembled this way, will require going under the trailer to grease.
by: Eric10/31/2019
I decided to call etrailer after my wife drove to a local trailer parts supplier and spent 2 hours dealing with incompetent people and still was sold the incorrect parts. I spoke to Natalie and was impressed by her knowledge of the old design Dexter suspension that I was working on. I ordered and actually received the correct parts the first time around. The spring equalizers, spring eye bushings and all the pins were high quality parts. I’ve been a professional tech for over 30 years and am having a harder and harder time finding knowledgeable parts people. Call and order with confidence.
by: Bill 12/20/2021
Shipping was super fast and Ms Hally answered all my questions.
by: Jose 07/08/2021
by: John 12/16/2020
by: Robert 04/05/2023
by: Nick 10/25/2022
7
7
See what our Experts say about this Redline Trailer Leaf Spring Suspension
Info for this part was:
Edited by:
Lindsey S
Installed by:
Cole B
Updated by:
Wilson B
Written by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Sierra K.
1/14/2022
You probably received the left hand side on accident Item # 13-82-1. Customer service will reach out to you.
Helpful Links
Trailer-Leaf-Spring-SuspensionRedline13-82-1.html