LED Trailer Turn and Parking Light w/ Flange - Submersible - 10 Diodes - Round - Amber Lens
(17 reviews)
Price: $22.18
In Stock
LED Trailer Turn and Parking Light w/ Flange - Submersible - 10 Diodes - Round - Amber Lens
Item # STL43ABX
Our Price: $22.18
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (17)
- Q & A (0)
- Photos
Optronics Trailer Lights - STL43ABX
- Tail Lights
- Round
- LED Light
- Amber
- 4 Inch Diameter
- Surface Mount
- Parking
- Rear Reflector
- Turn
- Submersible Lights
- Optronics
5-3/4" Diameter round. Waterproof, LED trailer light provides turn signal and parking light. Built-in reflector. Durable polycarbonate housing and lens. Surface mount with built-in flange. Accepts industry standard 3-prong plug.
Features:
- Round LED trailer light serves as a parking and rear-turn signal
- Sonically sealed, waterproof housing and lens unit is submersible
- Built-in reflex reflector removes the need for a separate reflector
- LEDs make great replacements for incandescent lights
- Last 50 times longer
- More efficient - provide brighter light with less power output
- No bulbs to replace - no brittle filaments
- Durable polycarbonate housing and lens
- Amber lens over white LEDs
- Compatible with 12V DC systems
- Surface mount to trailer with built-in flange
- Accepts industry-standard, 3-prong plug (A45PB or A47PB - sold separately)
- DOT compliant
- Meets FMVSS 108 requirements in any 360-degree position
Specs:
- Dimensions: 5-3/4" diameter x 1-5/8" thick
- Distance between mounting holes (center on center): 4-7/8"
- Diodes: 10
- Power draw at 12.8V:
- Stop/turn: 0.413 amps
- Tail: 0.026 amps
- Lifetime warranty on LEDs
Sonically Sealed, Waterproof Trailer Light
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
STL43ABX Optronics LED Trailer Turn and Parking Light w/ Mounting Flange - Reflex Reflector - Submersible - 10 Diodes - Round - Amber Lens
Alternate part number: STL-43ABX
California residents: click here
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
LED Trailer Turn and Parking Light w/ Flange - Submersible - 10 Diodes - Round - Amber Lens - STL43ABX
Average Customer Rating: 4.8 out of 5 stars (17 Customer Reviews)
5-3/4" Diameter round. Waterproof, LED trailer light provides turn signal and parking light. Built-in reflector. Durable polycarbonate housing and lens. Surface mount with built-in flange. Accepts industry standard 3-prong plug.by: Travis M. 10/21/2014
PERFECT!!! The light was exactly what the picture shows and the dims were spot on. The light is all solid and the flange mount it very sturdy. We installed these on our MCI MC9/12 buses and have had no complaints. The wired right in to the current system with no issues. We will continue to purchase more of these in the future.
by: Richard 02/08/2023
Delivery was very prompt. Item was an exact match for our somewhat ancient school bus’s tail light, which three different auto parts stores could not even find. Price was very reasonable.
by: Steve M.05/08/2017
The fit was perfect and I have not had any problems with this Item. etrailer was great to work with.
Steve M.
5/9/2018
This product is still going strong and was a Great purchase. Would buy again for sure. Thanks etrailer.
by: Natthan12/20/2017
The lights are good but them not coming with the wiring is unbelievable. Why sell lights without a way to hook them up.
Heather A.
12/20/2017
Natthan,Thank you for your review. You will need an industry standard 3 prong pigtail to wire this light. Part STL43ABX will work for you.
Helpful Links
by: Atten Bob03/05/2013
I received the lamps in excellent condition.I thought the young lady that took my order was excellent.I'll do business with them again.I put etrailer down as a favorite.I also look forward in doing business with them in the future because they treated me with respect on the phone.The price was good also.
by: Omar A01/18/2017
Spent over 8 hours looking for these same exact lights before I put my bus on the road for inauguration. Went to dozens of bus dealers, and part vendors, but i couldn't even find similar. Even called the manufacture, but they advised since i wasn't a distributor, they couldn't sell to me directly, neither did any of there distributors have it. Make a long story short, etrailer saved my butt!
by: keith vp06/13/2014
easy ordering and the product was ship and delivered very fast. will use again with great pride
by: Debbie 08/28/2022
Debbie
8/28/2023
Its a great product, replaced the existing light with no issues, and the lights are still bright and working fine!
by: Connie06/03/2019
package arrived safe and sound. the item was securely packed inside the box, as well, with bubble wrap. exactly the correct part. we will order from your site again for future needs.
thank you
by: Bob K01/31/2020
Arrived quickly, exactly as specified, works great.
by: Robert03/11/2022
Just what I needed
by: Edward K.10/11/2017
Light was for a fourteen passenger bus. It was an exact match and fit.
by: TerryWayne07/24/2021
Great Lights...
by: Virgil06/12/2015
Excellent
by: Dexter 08/10/2022
by: Jack 12/29/2022
by: Hector 03/17/2021
17
17
See what our Experts say about this Optronics Trailer Lights
- Does Replacing Turn Signal on Motorhome with LEDs Require Installing Load ResistorsWhen replacing an incandescent turn signal circuit bulb on a vehicle with an LED you would need to install load resistors or you can go with the easier solution of replacing the thermal flasher unit that controls the blinkers with a digital one. I did this on a vehicle years ago and it's much easier than trying to find the correct load resistor. We do not carry digital flasher units though so you would need to source that elsewhere.
view full answer... - Replacement Tail Light Options for a Fleetwood Southwind 32VSI do have some possible replacement tail light options for your Fleetwood Southwind 32VS such as the LED Trailer Tail Light part # STL413RFHXB which has a 4" diameter and mounts of a three bolt pattern. We also offer this same light with an amber lens, the LED Trailer Turn and Parking Light part # STL43ABX. If you don't think these will fit you can search our selection of 4" round lights which I have attached for you below.
view full answer... - Converting Separate Turn Signals and Brake Lights to Combined Turn and Brake Lights on a TrailerIf the trailer is one that is pulled by a motorcycle or a trailer designed to carry a motorcycle, you will need a converter in order to convert the wiring system used by the 6-Way to a 2 wire system used by trailer lights. The converter you can use is # RM-732. This takes the separate turn and brake signals and makes them a combined circuit. When you hit the brakes with the turn signal on, it should blink on one side and the other side will remain a solid brake light. The converter will...
view full answer... - Is There a Round Amber Light For Trailer Turn SignalsThere is a round amber light for turn signals, but not one that is 2-1/2 inches. The smallest round amber light that is for turn signals is the 5-3/4" diameter LED Trailer Turn and Parking Light # STL43ABX.
view full answer... - 4 inch Diameter Round Pedestal Mounted Trailer Light AvailabilityThe closest thing we have to what you need is the part # STL52ARB. This is a pedestal mounted round LED light that measures 4-1/4 inches in diameter. It has a red and amber side on it so hopefully it would work for your application. I attached a review video for you to check out as well.
view full answer... - Replacement Clearance Light and Turn Signal for 4-1/4 Diameter LightI may have a solution for you, but we don't have that exact light or one similar that is not an LED light; the # A52AB you were mentioning is just the lens and the light it goes on # ST52AA is not a close match for your old light. The light that is the closest match to your old 4-1/4" light are the LED Trailer Turn and Parking Light w/ Flange - Submersible - 10 Diodes - Round - Amber Lens # STL43ABX, which are 4" in diameter. I will also add that mixing LED lights with incandescent lights...
view full answer... - Recommendation of Turn Signal and Parking Light for Off-road useI recommend the amber trailer turn signal and parking light # ST70AB as it's sealed and waterproof. The rubber grommet # a70gb will provide shock mount protection extending the life of the lamp. The Optronics # MCL157AB could possibly be used as a turn signal but not recommended. The grommet you referred # A56GB would work as it will provide shock protection especially that you will be off-road. It will seat properly once the light is plugged into the grommet. The LED equivalent is amber...
view full answer...
Do you have a question about this Trailer Light?
Info for this part was:
Written by:
Tyler C
Expert Research:
Jameson C
Updated by:
Wilson B
Updated by:
Brian T
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Paul
3/5/2015
The LED lights STL43ABX you bought for your MCI bus are 12 volt. How did you connect them to your 24 volt MCI system?