4-1/4" Round. Waterproof trailer light serves 3 functions: brake, tail, and turn. ONE Series provides bright light using fewer diodes than other LEDs. Recessed mount with built-in flange. Locking connection point accepts 3-prong plug. Red lens.
Features:
Specs:
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at part number STL003RFLB. This is the Optronics round LED trailer light. It's going to feature one LED. It's going to serve as your brake light, turn signal and taillight. It's going to feature a sealed waterproof housing, as well as a lens unit. Here on the back side, you're going to notice that it has the connection point for a three wire pigtail.
These tabs that come off of here are actually locking tabs, so once that connection is in there, that bracket or that housing on the back of the plug is going to lock in these brackets and that's just a safety feature, as well as a feature that's designed to prevent theft. It's going to clip on either side of the plug for a nice, tight, secure fit. This uses surface mount technology, which is designed to protect the LED from shock and vibration. The diode is actually mounted directly onto a circuit board instead of through a hole. It's going to feature a long lasting LED. It's going to be a great replacement for an incandescent light.
LED's are going to last 50 times longer, you don't have to worry about replacing bulbs. You don't have to worry about brittle filaments and LED's are going to be more efficient, so they're going to provide brighter light with less power output. It's going to feature a sturdy poly-carbonate lens, as well as a housing. This is Department of Transportation compliant, so it meets FMVSS 108 requirements and CMVSS requirements for automotive lighting. We'll take a look at the overall dimensions real quick. It's going to give us an overall diameter of 5 1/2 inches.
Now the actual light itself, or that lens, looks like it's going to be about 4 1/4 of an inch. The depth of this unit is going to be about 2 inches. You can see here that this is going to be a flange mount design, so it has that flange that goes around the housing. That's going to have three mount holes. If we take a measurement, the distance that we have center on center between each hole. That's going to measure 4 1/4 of an inch, and that measurement is going to be the same no matter how you measure, center on center between all the different holes.
So you have three different holes, center on center 4 1/4 is going to be the separation. Optronics is going to put a lifetime warranty on the LED. Again, you have the three prong connection here at the back. A couple different options that you have, it does not include the plug that you need, so you can find that here at etrailer.com. It is going to be sold separately, part number A45PB is going to be the one I'm using for our demonstration today, or you can get a right angled plug, with part number A47PB. I'm going to go and hook this up to our external power source, that way you can see what it's going to look like with power running to it. Simply just take our plug, run it through the guides there, that is locking tabs, straight into the connections. It's going to snap into place. You can see there that once that is fully connected, creates a nice tight seal around those connection points, so nothing is going to get in there and do any damage. This is going to be the taillight function. Again, this is just one LED. When we apply our brakes, you can see how that brightens up for a brighter signal output. It's also going to do that when we activate our turn signal. That's going to do it for today's review of part number STL003RFLB, this is the Optronics round LED trailer light. .
Average Customer Rating: 4.8 out of 5 stars (899 Customer Reviews)
4-1/4" Round. Waterproof trailer light serves 3 functions: brake, tail, and turn. ONE Series provides bright light using fewer diodes than other LEDs. Recessed mount with built-in flange. Locking connection point accepts 3-prong plug. Red lens.Used these lights to upgrade to LED on my triple Axel equipment trailer. Lights are nice and bright. Would have given 5 stars except that since I have ordered these lights I have been bombarded with trailer light advertisements that just won't quit.
Got this very quickly!!
Just opened box seams to be everything ordered,will install lights over weekend an see if all work ,will let you know.1994 gooseneck be comning new.
Bought to replace existing weathered lights in a heavy trailer. Looked the same as depicted but my frame around lens was metal ,not plastic like the ones I received. I will use them, exact fit, but I doubt they will take the abuse the original did over the years
There was some trouble with the manufacturer being back ordered, etrailer kept me informed and shipped as soon as they received the product, very good communication.
been working great for 1 year.
Led lights are the way to go.
No more bulb problems
Great value. Perfect size. Easy to install. Dimensions were spot on.
Installed on the back of an old Jeep.
Only complaint is that the retention clips on the back are a little fragile, at least in the cold. A few snapped off but the plugs seem to hold well regardless.
received product in a timely matter, I am very happy with your services.
Nice Product
I couldn’t find anyone that had the tail light I needed for my trailer.after looking at every place I could find I finally looked on etrailer web site and found what I needed. I called and spoke with the representative to make sure it was the right one. The representative was very helpful and determined it was the right part. The part actually got delivered quite a bit faster than expected. Thank you
Great company to work with. Excellent inventory, customer service was amazing. I called and spoke to Alex and she was very pleasant to talk to. Plenty of installation videos available. As a RV park owner I am sure I will be using them again in the future.
I have a 2021 bass tracker boat and trailer. I backed into a pole and broke the tail light. I ordered this one and received it two days later. Fit perfect. No issues what so ever. Great product great service. I would recommend it.
They are a great fit for my 2023 Bass tracker trailer. These are the exact replica of the factory lights to come with the trailer.
I’ll shop here for more parts in the future
I ordered both the RVSTLB0060 and the RVSTLB0061. My only disappointment with the RVSTLB0061 was the LED module was not attached to the frame like the RVSTLB0060. Luckily, I had two small sheet metal screws I could use to secure the LED to the frame mount.
My installation was on a 2016 Rockwood A212HW. The OEM lights were the Optronics incandescent version. RVSTLB0060/61 are direct replacements except for the odd (offset) drill pattern used during factory assembly (they did not use all the Optronic predrilled holes). OEM mounting screws were reused but I added a bead of glue to the threads to help secure over time. Note the factory uses a good bit of RTV silicon on the top portion of the light frame to help hold in place and fit the slight curve of the body.
I wished they have put the light in some kind of cushioning, the light was put in a box with nothing to protect it from damage.
The trailer lights were the correct ones and installed easily less than 10 min. and worked perfectly.
thanks
Exact replacement and easy install. Works great.
The right product perfect match . Plug in and mount to bracket 5 minute job
5 stars for etrailer getting my order out and delivered in a reasonable amount of time. One star for the product.
These lights were OE on my Loadrite trailer purchased in summer 2020. I use the trailer to haul my boat at the end of the season and launch it at the beginning. So it's been in the water 4 times. The passenger side died after one dunk. And the drivers failed after 3.
I'm probably crazy for replacing the lights with the same part.
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.