Optronics LED Trailer Clearance or Side Marker Light - Submersible - 6 Diodes - Amber Lens - 12V
(56 reviews)
Price: $18.31
In Stock
Optronics LED Trailer Clearance or Side Marker Light - Submersible - 6 Diodes - Amber Lens - 12V
Item # MCL66AB
Our Price: $18.31
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (56)
- Q & A (0)
- Videos (1)
- Photos
Optronics Trailer Lights - MCL66AB
- Clearance Lights
- Rectangle
- LED Light
- Amber
- 4L x 1W Inch
- Surface Mount
- Rear Clearance
- Side Marker
- Submersible Lights
- Optronics
4" x 1" Rectangle. Waterproof, LED trailer light serves as either a side marker light or a clearance when properly mounted. Durable polycarbonate lens and housing. Surface mount on trailer - hardware not included. 2-Wire design. P2 rated.
Features:
- Rectangular LED trailer light functions as a clearance light or a side marker when properly mounted
- Sonically sealed, waterproof housing and lens unit is submersible
- LEDs make great replacements for incandescent lights
- Last 50 times longer
- More efficient - provide brighter light with less power output
- No bulbs to replace - no brittle filaments
- Durable polycarbonate housing and lens
- Amber lens over white LEDs
- Compatible with 12V DC electrical systems
- Surface mounts to trailer - hardware not included
- 2-Wire design includes power lead and ground wire
- DOT compliant
- P2 rated
Specs:
- Dimensions: 4" long x 1" wide x 1-3/16" thick
- Distance between mounting holes (center on center): 3"
- Diodes: 6
- Power draw at 12.8V: 0.057 amps
- Lifetime warranty on LEDs
Manufacturer Cross Reference
Light will work as an exact replacement for:
Uni Bond # LED0750A
Grote # 47243
Peterson # M160A
Maxxima # M20340Y
Sonically Sealed, Waterproof Trailer Light
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
P2-Rated Lights
A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
MCL66AB Optronics 12V LED Trailer Clearance or Side Marker Light - Submersible - 6 Diodes - Rectangle - Amber Lens - P2 Rated
Alternate part number: MCL-66AB
California residents: click here
Video of Optronics LED Trailer Clearance or Side Marker Light - Submersible - 6 Diodes - Amber Lens - 12V
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Optronics Trailer Lights - Clearance Lights - MCL66AB Review
This is Optronics Thin Line LED Trailer Clearance Light, part number MCL66AB. This light is sealed and waterproof, so it is safe to use on boat or jet ski trailers. Inside are 6 LEDs that draw a total of .048 amps at 12.8 volts. It is designed to surface mount to your trailer using mounting holes that are 3 inches on center. On the back of the light are your 2 wire leads. The white wire lead with an eye-ring terminal for ground and the black lead for power. Next, we will hook up the light to a power source, so you can see how it looks. We will connect the white to our ground and we will connect the black to our power. Next, we will turn off the overhead lights, so you can see how bright it is. And that is it for Optronics Thin Line LED Trailer Clearance Light, part number MCL66AB.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Optronics LED Trailer Clearance or Side Marker Light - Submersible - 6 Diodes - Amber Lens - 12V - MCL66AB
Average Customer Rating: 4.9 out of 5 stars (56 Customer Reviews)
4" x 1" Rectangle. Waterproof, LED trailer light serves as either a side marker light or a clearance when properly mounted. Durable polycarbonate lens and housing. Surface mount on trailer - hardware not included. 2-Wire design. P2 rated.by: Paul07/02/2023
The product is what I been looking for. Pricey but I needed them. The 5 day delay in shipping is not impressive.
by: Jimmy 01/24/2024
Good light
by: Carl S.01/17/2020
Replace original equipment same light excellent easy installation
by: Timothy 06/15/2023
It took awhile to find the replacement for the originals, but these are the ones. My originals were Peterson M160A
by: Paul 05/09/2023
I found the correct light, finally, and now have all my clearance lights working properly.
by: Mike04/05/2017
I bought these to replace all the old ones on a camper re-fit. I bought both Amber and Red. I replaced the entire fixture and it was worth the effort. These are very bright and moisture proof so they don't get bad connections. I soldered the wires into the wiring though.
by: Renato03/11/2023
The products comes nice but missing gasket ? Maybe the light comes with out gasket but the product is fine
by: Tom H04/20/2015
I have used etrailer on several occasions and have been very pleased to find the items I needed here when I couldn't find them anywhere else. They're site is very user friendly and easy to navigate through. They are friendly and are eager to please. I highly recommend them for all your trailer needs.
Tom H.
4/19/2016
Great. Couldnt be happier. Still like new and saltwater is incredibly corrosive.
by: Doug03/23/2018
It would be difficult , if not impossible, to have a more helpful person facilitating the placing of an order than Paula at etrailer. I swapped out all incandescent light fixtures on my trailer with led, and the buyiing/ selection process was made a pleasure with her help.
by: Ed P.09/11/2014
Nice an bright. Holes lined up perfectly for my 2000 EZ Loader trailer and Skeeter. Only downside was that overall the light was slightly shorter than the OEM light which meant I had a hole to plug.
by: Jim L05/17/2015
I put these amber lights on the side of my utility trailer great choice totally sealed no maintenance .
by: Mike05/22/2014
These lights worked really nice fitting in to the corner openings on my Pace trailer. I love the fact that they are LED and don't pull much if any battery load.
by: Chad Smith05/04/2013
Excellent lights and I looked all over the net to find these particular lights and Etrailer.com had exactly what I needed and great price and fast shipping!!
by: Gary06/07/2019
Better light than what was originally installed on my trailer. Easy to install and still working great.
by: Steven05/30/2019
Very well constructed. I needed some lights that would mount flush on some 1" square tubing and these worked perfectly.
by: John 04/23/2020
Tip notch product and customer service. Probably the best I've experienced. I got 11 of these lights and they are obviously well made. Will definitely shop around.
by: Andrew 12/27/2022
No complaints
by: Gary06/13/2019
Perfect replacement for a broken tailig ht.
by: Robert M06/04/2019
Simple and smooth design, two screws and two connectors to install.
by: Reggie F10/30/2016
Very bright and are good quality.
Reginald
10/30/2017
Still working great.
by: William 09/20/2022
GREAT JOB. PARTS SHOWED UP QUICKER THAN PROMISED. GREAT TO DEAL WITH. HAVE USED FOR YEARS
by: Jimmy 08/24/2022
Great product. Working as it should.
by: Bill 09/13/2022
Very Bright. Much better than those little 2"
by: RS09/13/2022
Just what i was looking for
by: Jim McB06/22/2013
This is an excellent light. I'm more than satisfied with the quality of this product.
25
56
Show More Reviews
See what our Experts say about this Optronics Trailer Lights
- Mounting Hardware Needed For The Optronics LED Trailer Clearance/Side Marker Lights The Optronics LED Trailer Clearance or Side Marker Light # MCL66RB and its amber counterpart # MCL66AB are both surface mount installations so you would just need to use the appropriate screws for whatever material you'll be mounting them too. I usually use some self-tapping screws because clearance lights are typically mounted to metal. I do recommend using some butyl tape # AL28FJ on the back side of the lights to help prevent water from leaking into the wall through the screws.
view full answer... - How to Find Right Amber Clearance Light For Horse TrailerHi there Todd; while I was unable to find any type of reference to a J04248 light, it sounds like you are just needing to replace the amber/yellow clearance/marker light on the side of your wife's horse trailer, is that right? If so, you don't need to find the exact light, you can replace it with one that is similar dimensions and wires the same. I googled some photos of a Brenderup horse trailer and from what I saw they were just surface-mounted lights. So if you just measure the lights...
view full answer... - Dimensions of Optronics LED Trailer Clearance Light part # MCL66ABThe actual overall dimensions of the Optronics LED Trailer Clearance Light part # MCL66AB are 4" long x 1" wide x 1-3/16" thick and the distance between the mounting holes is 3 inches.
view full answer...
Do you have a question about this Trailer Light?
Info for this part was:
Written by:
Tyler C
Video Edited:
Patrick B
Expert Research:
Jameson C
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Brian T
Updated by:
Noah M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Mike
4/5/2018
Very nice, being waterproof and they are more than bright enough also. It was a good investment compared to the standard bulb kind that were on the camper by far.