Rack'Em Motorcycle Helmet Rack for Enclosed Trailers
(11 reviews)
Price: $99.53
In Stock
Rack'Em Motorcycle Helmet Rack for Enclosed Trailers
Item # RA-22
Retail:$108.05
Our Price: $99.53
You Save: 8%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (11)
- Q & A (0)
- Videos (1)
- Photos
RackEm Trailer Cargo Organizers - RA-22
- Hooks and Hangers
- Helmet Hanger
- Recreation
- Pre-Drilled Holes
- RackEm
Helmet Rack for Enclosed Trailers by Rack'Em Manufacturing
Enclosed Trailer equipment racks feature a hook design at the top of the rack that allows them to hang from the metal frame runner at the top of the side walls on the trailer for added strength. They are predrilled so that they may be screwed securely to the wall. The unique and durable "Hammered" paint finish will last for many years.
- Holds (1) open or full face helmet
- Helmet is secured with the chin strap hook
- Motorcycle helmet rack also has a coat hook and tray for your gloves
RA-22 Rack'Em Motorcycle Helmet Rack for Enclosed Trailers
Video of Rack'Em Motorcycle Helmet Rack for Enclosed Trailers
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for RackEm Motorcycle Helmet Rack Review
Today we're going to be taking a look at as well as doing a quick installation of the Rack'em motorcycle helmet rack for enclosed trailers, part number RA-22. Let's go ahead and go over the different portions our different sections of the rack. This top section as well as this part right here is what holds the helmet in place. The helmet sits over and this here is a chin strap loop which helps keep the helmet on the rack. We have a hook down here. We can put a coat or a jacket or even a jersey hang from the bottom. As well as this little area here can be used to put your riding gloves if you want. Let's go ahead and show you how the helmet goes into place.
This is designed for a closed or an open faced helmet. Today we're going to be using a motocross style helmet. Go ahead and slide that down. Your chin strap will then go around the spring loaded chin strap hook. Go back up and hook the chin strap as though you we're securing the helmet to your head.
That helps keep the helmet in place as you're going down down the road. It has a hook here built in on top. There is a hole right here that we can add a screw to secure it to the wall of the enclosed trailer. Now, ordinarily we would be able to hook this over the top of our trailer, but this particular trailer, the way it's built, it doesn't allow you to do that. We've gone ahead and added a 2 by 6 board with an angle cut on the back side, just using a simple table saw that matches the contour of the hook portion of the rack. We've also added small block of 2 by 4 to give us a little bit of support when we put our rack onto the wall.
We'll go ahead and set our rack in place. As you can see, it's got nice support there. We'll just need to add a wood screw right there to help secure it to the wall. The wood screw is something you will need to provide. It does not come with the helmet rack. With that, that will do it for our quick look as well as installation of the Rack'em motorcycle helmet rack for enclosed trailers, part number RA-22. .
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Rack'Em Motorcycle Helmet Rack for Enclosed Trailers - RA-22
Average Customer Rating: 4.5 out of 5 stars (11 Customer Reviews)
by: S Ward08/23/2017
The Rackem organizers are made for the trailer but have worked well in our home for organizing motorcycle gear in the mudroom (helmets are stored safely) and in our grandsons bedrooms for their fencing gear. It allows helmets to dry after energetic competitions, and has space for the gloves and other items. We made a separate wood support for the fencing blades. Oak boards were stained and attached to the walls to support the Rackem organizers, adding a good look to the in-house use.
by: Chris Mc.05/29/2017
Product does a nice job of holding the helmet and other articles after riding. I selected this hanger because I wanted something that I could allow helmets and other gear to dry out, whether sweat, mud, rain or any combination of the lot. The basic set-up shown in the post ride picture has made a number of 6+ hour trips without any issue of the helmet or other gear coming off the rack. Once I figured out the proper angle for the bracket and determined the proper height to allow the helmet to mount without smacking the trailer ceiling, mounting was relatively simple. I did have to add the screw holes to the upright in order to anchor it the wall/support even though the graphic shows one hole present.
After a year of use, I have no real complaints with the rack. It does what I hoped it would when I purchased it.
by: KR8CH01/26/2023
Functional additions (2) to our hybrid snowmobile trailer for keeping all of our gear out of the truck cab. Back the sleds out & the trailer becomes the dressing room.
by: Dan B08/25/2016
Great product, excellent quality. Great solution to keeping expensive helmets safe during transport. Timely transaction.
Dan B.
11/1/2017
Its great and no issues. Dont use it a lot but its perfect for our needs.
by: Gary05/26/2016
A perfect easy solution to my needs that was perfectly represented. Coupled with great service, this was a great experience
by: Fairren10/22/2020
Usually have what I'm looking for and good prices easy ordering and quick deliveries
by: Randy 03/30/2023
by: Brian09/16/2020
by: Kenneth 04/12/2021
by: Michael 08/25/2022
by: Coy08/18/2022
11
11
See what our Experts say about this RackEm Trailer Cargo Organizers
- Hook Size of Rack'em Motorcycle Helmut RackI just went out and re-measured the hook of the Rack'em Motorcycle Helmut Rack # RA-22. The inside length of the hook is 1-1/2 inches and it reaches about 1-1/4 inches from the main upright. It's also about 1-1/4 inches from the top of the upright to the bottom of the opening of the hook on the inside.
view full answer...
- Dimensions of the Rackem Helmet Rack # RA-22I went out into our warehouse to get the dimensions of the Rack'em Motorcycle Helmet Rack # RA-22 that you referenced and found that the overall height is 20-1/4 inches, the depth is 9-1/4 inches not including the 2 inch hook, and the overall width is 5 inches.
view full answer...
Do you have a question about this Trailer Cargo Organizer?
Info for this part was:
Expert Research:
Jameson C
Video Edited:
Dustin K
Updated by:
Erin H
Updated by:
Manda E
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
S W.
8/23/2018
We love them, suit our needs perfectly! Have two mounted in our mud room and two in the garage. The helmet, gloves and jacket, all at hand for a great ride.