bing tracking image
  1. Trailer Suspension Parts
  2. Redline
  3. Hangers
  4. Suspension Kits
  5. Boat Trailer
  6. Camper
  7. Car Hauler
  8. Snowmobile Trailer
  9. Utility Trailer
Triple-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear, 5-7/16" Center

Triple-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear, 5-7/16" Center

Item # APTT1
Retail:$310.80
Our Price: $268.71
You Save: $42.09
Trailer Suspension Parts
Shipping Weight: 47 lbs
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
Leaf-spring mounting kit includes 2-1/2" tall front hangers, 5-7/16" tall center hangers, 2-1/2" tall rear hangers and necessary hardware. Equalizers are 8" long. Components for mounting axle to springs sold separately. Great Prices for the best trailer suspension parts from Redline. Triple-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear, 5-7/16" Center part number APTT1 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (3)
  • Q & A (0)
  • Photos

Redline Trailer Suspension Parts - APTT1

  • Hangers
  • Suspension Kits
  • Boat Trailer
  • Camper
  • Car Hauler
  • Snowmobile Trailer
  • Utility Trailer
  • Double Eye Springs
  • Triple Axle
  • Redline

Leaf-spring mounting kit includes 2-1/2" tall front hangers, 5-7/16" tall center hangers, 2-1/2" tall rear hangers and necessary hardware. Equalizers are 8" long. Components for mounting axle to springs sold separately.


Features:

  • Attaches 6 leaf springs (sold separately) to your trailer frame
    • Use table below to determine hanger location based on type of leaf springs
  • Achieves 4" or 4-1/2" clearance between trailer frame and axle, depending on axle size
  • Includes:
    • (4) 2-1/2" Tall front and rear hangers (115918)
    • (4) 5-7/16" Tall center hangers with 3/4" bolt holes (115919)
    • (4) 8" Long straight equalizers (A2251B3)
      • 3/4" Diameter center hole for mounting to hanger
      • 9/16" Diameter end holes for attaching to springs
    • (16) 2-5/8" Long shackle straps (115052)
    • (20) 3" Long x 9/16" diameter shackle bolts (9163B)
    • (20) 9/16" Diameter locknuts (916DLN)
    • (4) 3-1/2" Long x 3/4" diameter wet equalizer bolts (126A1LN)
    • (4) 3/4" Diameter castle nuts (165093)
    • (4) 2-1/4" Long cotter pins (165649)
    • (4) 1/8" MPT grease zerk (1610)
  • Designed for use on trailers with triple, 2,000-lb to 7,000-lb axles
  • Does not include components for mounting axle to springs



Hanger Locations for Triple Axle

Leaf SpringsA - Distance Between Front and 1st-Center HangersB - Distance Between Center HangersC - Distance Between 2nd-Center and Rear HangersD - Distance Between U-BoltsE - Distance Between Center of Axle and Trailer FrameAxle Diameter
SP-169275 (1020)24-3/4"29"24-3/4"28-1/2"4-1/2"1-3/4"
(typical 2,000-lb trailer axle)
SP-219275 (PR722)
SP-220275 (PR3)
SP-218275 (PR4)
SP-212275 (PR4B)
SP-111275 (PR5)
SP-198275 (PR6)
29-1/2"34"29-1/2"34"4"2-3/8"
(typical 3,500-lb trailer axle)


APTT1 Triple Axle Hanger Kit - 1.75" Double Eye Springs - 2,000 lbs to 7,000 lbs






Customer Reviews

Triple-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear, 5-7/16" Center - APTT1

Average Customer Rating:  5.0 out of 5 stars   (3 Customer Reviews)

Leaf-spring mounting kit includes 2-1/2" tall front hangers, 5-7/16" tall center hangers, 2-1/2" tall rear hangers and necessary hardware. Equalizers are 8" long. Components for mounting axle to springs sold separately.

by:

To b honest I haven’t even opened the box.
I have always been happy with my purchases from e trailer.



by:

Used kit to completely redo goose neck. Worked great I like the zerk fittings. I did drill and tap the bars for zerks as well



by:

Very glad each item was individually packaged because the box was busted open in two places (not the fault of the company) and even the bigger parts could have come out. All parts were in the box and everything worked as it was intended. Great communication from company about shipping.


3
3

See what our Experts say about this Redline Trailer Suspension Parts

  • Recommended Double-Eye Springs and Hangers To Mount Lippert Center Point On Trailer W/ 5300lb Axles
    Since you will be replacing your slipper springs with double eye springs you will need to replace the hangers on the trailer along with the springs. You mentioned your 2022 Raw Max 34' Flatbed trailer has tandem axles I recommend the Tandem-Axle Trailer Hangers # H248 with the 6-Leaf Double-Eye Spring for 5,300-lb Trailer Axles # SP-222275. These springs measure 24-7/8" long, and you will start by test fitting the hangers at 29-1/2" between the front and center hangers, and 29-1/2" between...
    view full answer...
  • Can Triple Axle Hanger kit part # APTT5 be Used on Trailer with 7k Axles
    Yes, the Triple Axle Hanger kit part # APTT5 would work great on your trailer that has 7k axles as it was designed for use on axles up to 7k.
    view full answer...
  • Recommended Hanger Kit for a Triple-Axle Trailer Hanger Kit for Double-Eye Springs
    The recommended hanger kit for a Triple-Axle Trailer Hanger Kit for Double-Eye Springs is part # APTT1. This kit is designed to work on axles with capacities of 2,000 to 7,000 pounds. If your mobile home trailer axle is within this weight capacity this kit should work for you. I attached a picture that has a chart that shows exactly how you should space the axles when used with a 6-leaf spring for 7,000 pound trailer axles like part # e64SR.
    view full answer...
    Image 1 for
  • Suspension on Instigator 3-Axle Boat Trailer Hits Frame
    I did some research on your trailer and also read a few bad reviews from customers with the company. Since I do not have the trailer in-front of me, there is no way for me to say for certain that the suspension is mounted incorrectly. But, it definitely should not be hitting the frame under normal use. I would recommend having a trailer professional checkout your trailer to see if everything is mounted correctly. If you bought the trailer new, you may be able to contact the company and...
    view full answer...
  • Can I Lift The Rear Of My Trailer If My Axles Are Already Overslung
    Your only option is to go with taller suspension spring hangers since your axles are already overslung. (Your leaf springs are on top of your axles.) Due to this, you cannot just raise the rear of your trailer, in a safe manner. For example, you will be able to raise the height of your trailer with the Triple-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear, 5-7/16" Center, part # APTT1, if your hangers are shorter than 2-1/2". If you provide me with the measurements of...
    view full answer...
    Image 1 for
  • Differences Between Triple Axle Hanger Kits APTT1, APTT3, and APTT5
    The differences are the dimensions of the hangers and equalizers of the three kits. The # APTT1 uses totally straight equalizers and taller center hangers. The # APTT3 uses more traditional sized equalizers and center and outside hangers that differ in size slightly. The part # APTT5 uses a standard sized equalizer and hangers that are all the same height. The part # APTT3 is the one that is the most commonly used. It would be my recommendation for your trailer.
    view full answer...

Do you have a question about this Trailer Suspension Part?


Info for this part was:

Employee Jameson C
Expert Research:
Jameson C
Employee Alexander C
Updated by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.