Replacement Spacer Washer for Equal-i-zer Weight Distribution Head
(27 reviews)
Price: $4.37
In Stock
Replacement Spacer Washer for Equal-i-zer Weight Distribution Head
Item # EQ90-04-9110
Our Price: $4.37
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (27)
- Q & A (0)
- Videos (1)
- Photos
Equal-i-zer Accessories and Parts - EQ90-04-9110
- Weight Distribution Hitch
- Hardware
- Washers
- Equal-i-zer
- Equal-i-zer
Replacement washer is used in conjunction with rivet (EQ90-03-9105 - sold separately) to achieve proper positioning of your Equal-i-zer weight-distribution head. Designed for use with all Equal-i-zer systems.
Features:
- Replacement washer fits all Equal-i-zer weight-distribution systems
- Includes 1 washer
- Recommended 6 for use as spacers to achieve proper head tilt
- Made in the USA
EQ90-04-9110 Replacement Spacer Washer for Equal-i-zer Weight Distribution Head
Video of Replacement Spacer Washer for Equal-i-zer Weight Distribution Head
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Equal-i-zer Weight Distribution EQ90-04-9110 Review
Speaker 1: Today we're taking a look at a Replacement Spacer Washer for the Equal-i-zer Weight Distribution Heads. This replacement washer fits all Equal-i-zer weight distribution systems. It simply slides onto a spacer rivet to achieve proper head tilt which would be this component here. This part number comes with one washer. Now just keep in mind that you may need up to six washers to achieve proper tilt depending on your application. We're looking at a durable steel construction with protective finishing to keep it safe from rust and corrosion.
It's made in the USA. The outer diameter, outer edge to outer edge, is 1-1/16". Inner diameter is slightly larger than a 1/2" so it does fit onto a 1/2" spacer river or a spacer rivet with a 1/2" diameter pin. That's going to do it for today's look at the Replacement Spacer Washer for Equal-i-zer Weight Distribution Heads.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
Customer Reviews
Replacement Spacer Washer for Equal-i-zer Weight Distribution Head - EQ90-04-9110
Average Customer Rating: 4.8 out of 5 stars (27 Customer Reviews)
Replacement washer is used in conjunction with rivet (EQ90-03-9105 - sold separately) to achieve proper positioning of your Equal-i-zer weight-distribution head. Designed for use with all Equal-i-zer systems.by: Kenneth 02/11/2023
Washers. Good plated ones that wont rust
by: Dan K07/21/2023
Was a bit disappointed with these. Not a direct replacement and can get a back the same size at home depot for the same price.
Will not purchase again
by: Dennis09/28/2020
When the RV dealer set up my hitch they didn't give me any of the extra parts. I ordered these washers to make adjustments to my equalizer hitch. They are an exact match to the original washers. Shipping was quick. etrailer is a great company to order from.
Dennis
9/28/2021
The hitch setup works great! Having the additional washers made it easy. I have been very pleased. Thanks etrailer!
by: Thaddeus07/03/2019
Purchased all the necessary parts here to duplicate the weight distribution hitch for a second tow vehicle used for our travel trailer. The etrailer website had all the Equalizer parts numbers making ordering easy and accurate. Tracking info was forwarded to me by email as soon as order shipped. Parts arrived quickly and well packaged. Now we’re ready to tow using either of our vehicles. Thanks etrailer!
by: Chad04/11/2022
Exactly the product I needed for my equalizer hitch as I was missing some of these washers from the initial camper set up from the dealer. Hopefully this will solve my unlevel issues I have been having and didn’t realize until I watched some equalizer hitch videos.
by: Dustin04/12/2023
great!
by: Bradley07/10/2019
Exactly what I needed. Easy website to use and quick delivery.
by: Joe 07/12/2021
Delivered exactly as ordered exactly when promised!
by: Scott 04/06/2020
what can i say. got here fast
by: Richard 05/02/2021
slow shipping, disappointing
by: Michael01/30/2019
Came as expected and earlier than shipping date.
by: Greg 03/11/2024
by: Christopher08/06/2019
Great psrt
by: Dirk12/09/2021
Thinner than the original spacers. Hope they’re strong enough
by: Keith 08/24/2023
by: John 05/06/2024
by: Robert 08/22/2021
Very fast delivery
by: Raymond 09/27/2022
by: Thane04/13/2021
by: Jake 10/11/2021
by: Benoni09/15/2022
by: Michael 08/03/2022
by: Scott 03/13/2023
by: Jack 07/01/2021
by: David 09/24/2022
25
27
Show More Reviews
See what our Experts say about this Equal-i-zer Accessories and Parts
- Replacement Washers for Equal-i-zer Weight Distribution SystemThe Replacement Bolts for Equal-i-zer Weight Distribution Head part # EQ90-02-9100 contains four 3/4" flat washers that go on the bolt that attaches the head to the shank (see photo (#17)). If you instead need the washer that controls the head tilt (see photo (#26)) then you will need to use the Replacement Spacer Washer for Equal-i-zer Weight Distribution Head part # EQ90-04-9110 instead. The Equal-i-zer Weight Distribution System does not come with any conical tooth washers, at least...
view full answer...
Info for this part was:
Installed by:
Cole B
Updated by:
Shelly K
Written by:
Wilson B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Kenneth
2/12/2024
Product fits fine with the Equalizer hitch