Recommended Hanger Kit for a Triple-Axle Trailer Hanger Kit for Double-Eye Springs

Question:

I need a triple axle double eye hanger kit for mobile home trailer axle on a farm trailor. Could you suggest a kit for me, thanks.

asked by: Ricky

Expert Reply:

The recommended hanger kit for a Triple-Axle Trailer Hanger Kit for Double-Eye Springs is part # APTT1.

This kit is designed to work on axles with capacities of 2,000 to 7,000 pounds. If your mobile home trailer axle is within this weight capacity this kit should work for you.

I attached a picture that has a chart that shows exactly how you should space the axles when used with a 6-leaf spring for 7,000 pound trailer axles like part # e64SR.

expert reply by: Chris O

click to enlarge

Mark

4/27/2020

Which triple axle hanger kit would work for the 1 3/4 inch wide, single leaf spring, mobile home axles? Thks!

Chris R.

4/29/2020

The right hanger kit will depend on the height of your existing hangers - going with smaller or larger hangers will alter the trailer height. Do you happen to have this measurement?

Mark J.

4/29/2020

@ChrisR Will be putting new hangers on. So whichever would work best. I believe there is one with all the same height hangers and one with the center hangers longer. This is a triple axle setup. Thk you

Chris R.

4/30/2020

The Triple-Axle Hanger Kit # APTT1 should work well but it's still important to try to get new hangers that are close in height to your existing units. This just lets the suspension work like it did before and won't raise or lower the trailer's current deck height.