bing tracking image
  1. Trailer Jack
  2. Fulton
  3. Boat Trailer
  4. 1001 - 2000 lbs
  5. Sidewind Jack
  6. Swivel Jack
Fulton F2 Swing-Up Jack w/ Pivoting Footplate - 4"-5" Frames, Sidewind, Bolt On - 2,000 lb

Fulton F2 Swing-Up Jack w/ Pivoting Footplate - 4"-5" Frames, Sidewind, Bolt On - 2,000 lb

Retail:$499.97
Our Price: $253.68
You Save: $246.29
Trailer Jack
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
With an articulating footplate that offers superior stability even on unlevel ground; corrosion-resistant coatings over all surfaces; and an easy-to-use, adjustable swivel mount, this sleek, marine jack is perfect for nearly any application. Great Prices for the best trailer jack from Fulton. Fulton F2 Swing-Up Jack w/ Pivoting Footplate - 4"-5" Frames, Sidewind, Bolt On - 2,000 lb part number F1413230134 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (497)
  • Q & A (0)
  • Photos

Fulton Trailer Jack

  • Boat Trailer
  • 1001 - 2000 lbs
  • Sidewind Jack
  • Swivel Jack
  • Leveling Jacks
  • Tongue Jacks
  • Bolt-On
  • 10 Inch Lift
  • With Round Foot
  • Fulton
  • Alloy Aluminum

With an articulating footplate that offers superior stability even on unlevel ground; corrosion-resistant coatings over all surfaces; and an easy-to-use, adjustable swivel mount, this sleek, marine jack is perfect for nearly any application.


Features:

  • Adjustable mount and swivel system for easy lifting and transport
    • Can be adjusted to any height for mounting
    • Swivels into position with integrated, easy-to-grip pull pin
  • Maintenance-free construction
    • Lubricated, 1-piece gearbox eliminates need for manual lubrication
    • Ventilation port allows you to add extra grease if desired
  • Heavy-duty, articulating footplate works great on uneven surfaces
    • Ball-and-socket connection between jack and footplate allows ultimate adjustability
    • Round, cast base provides superior stability
  • Anodized finish on inner and outer aluminum alloy tubes prevents rust, even in the harshest environments
  • Ergonomic, sidewind handle is made of strong plastic for durability and ease of use
  • Bolt-on mounting bracket and necessary hardware are included


Specs:

  • Fits: 4" and 5" frames
  • Lift height: 10"
  • Bracket range of adjustability: 13"
  • Footplate diameter: 7"
  • Pull pin diameter: 9/16"
  • Static capacity: 2,000 lbs
  • Lifetime limited warranty


1413230134 Fulton F2 Marine and Recreational Adjustable Swivel Jack with Footplate, Sidewind, 10" Travel, 2,000 lbs

Item # F1413230134




California residents: click here


Customer Satisfaction Score:


Customer Reviews

Fulton F2 Swing-Up Jack w/ Pivoting Footplate - 4"-5" Frames, Sidewind, Bolt On - 2,000 lb - F1413230134

Average Customer Rating:  4.8 out of 5 stars   (497 Customer Reviews)

With an articulating footplate that offers superior stability even on unlevel ground; corrosion-resistant coatings over all surfaces; and an easy-to-use, adjustable swivel mount, this sleek, marine jack is perfect for nearly any application.

by:

Nice upgrade of my failing 1500# trailer jack...I have to park my boat on not so level rocked area next to my garage which put stress on the old jack. This F2 model is much beefier and literally took 10 minutes to swap out.

Dave B.

7/28/2020

Its a stud! No regrets!



by:

Nice for the first 2 years, before having to disassemble it and grease the shaft and top gears. Gets a lot of water inside for some reason. Too bad its not better sealed.
Finally broke the gears and was told that they are meant to break as a safety precaution. Easy to replace and sent to me overnight and for free. It was Xmas! Nice.
Two fishing trips after the gears were replaced, the cheap plastic housing meant to hold the crank, twisted right off. Suggestion for Chinese Manufacturer: Change to a more solid (aluminum) head. I only like this one because of the plate base, and swing away. Not really good for the stated capacity of 2000lbs. Must have been a typo for 200lbs. Wont buy this one again!!



by:

This jack has exceeded all expectations. It’s easy to use, has great lifting and holding capacity, folds to the storage position easily & securely, and because of it’s folding capability (the main reason for purchasing it) we are able to open the truck tailgate while the trailer is hitched to the truck. Not cheap, but you get what you pay for - nice materials, construction, and functions.



by:

Came days earlier than expected . Just installed it and it is much beefier than the model my new used boat came with. Driveway is fairly steep and I feel much more comfortable with the big felixilbe base.



by:

Works GREAT!!! No rust or corrosion after a year of saltwater use! I have a high ball mount that most jacks cannot reach. This jack, due to its adjustability, raises my trailer tongue well beyond what I require. The second best trailer jack I have ever had. Behind only the Seasense all Stainless Steel jack, no longer in production, with the giant wheel. I have been through a lot of trailer jacks and believe this is the best one on the market today!



by:

The Jack has worked great. I've bought 2 jacks with single wheel and double wheel and both broke. The wheels kept cracking and breaking. After buying this jack I have not had an issue. It works great!



by:

Good quality, sturdy jack. More stable with base than the wheel. etrailer was great. Fast shipping and excellent customer service.



by:

I called the 800 number and customer service found me this product, which was bigger than normal and fit my trailer. I highly value the help etrailer.com gave me and appreciate the diligence of the representative who emailed me and followed up with me until I found the right product and was totally satisfied... Because I don't have all day to troll on line, I'll be back here for more parts as needed. Highly recommend it.



by:

Best trailer jack ever by far
Rugged,
well made



by:

This jack was installed on a tongue heavy parade float and has preformed well. It raises up easy when removing the float from the tow vehicle. Very happy with this purchase.



by:

These guys are awesome, had some shipping damage and they immediately sent me a replacement! No hassle just great service, I will order from them again, thanks guys!



by:

Avery solid jack and simple installatio n.



by:

Works well in our trailer design. Etrailer comes through again



by:

Installed and works as advertised. Delivery was prompt. No problems.



by:

Very well made!



by:

excellent



by:

Awesome



by:



by:

Works Great! My back sure Thanks You!



by:



by:



by:



by:



by:



by:

Description of the product was very good. Product quality is very good. This jack was easy to install


25
497
Show More Reviews

See what our Experts say about this Fulton Trailer Jack

  • Fulton Replacement F2 Swivel Jack with Footplate Compatibility with 3-1/2 by 4-1/2 Inch Plate
    The Fulton F2 Swing-Up Jack w/ Pivoting Footplate # F1413230134 has bolt hole dimensions that are 5-1/2 by 4-1/2 inches. You would need to remove the swivel plate from each jack and swap them to make both jacks compatible with your desires. This is easily done just removing the swivel bolt nut.
    view full answer...
    Image 1 for Image 2 for
  • Mounting Bolt Hole Pattern on Fulton F2 Swing-Up Jack w/ Pivoting Footplate # F1413230134
    The bolt hole pattern, center on center, of the Fulton F2 Swing-Up Jack w/ Pivoting Footplate # F1413230134 is 4-1/2 inches for the shorter ones and 5-1/2 inches for the longer ones. Since the jack can be oriented 2 different ways you will be able to turn it to fit your application. Since your shorter distance is 3-1/2 inches you will need to drill holes to use this jack as this is the closest option that we currently have to the bolt hole pattern that you have.
    view full answer...
    Image 1 for
  • Recommended Swivel Bolt-On Trailer Jack for Pop Up Camper
    I recommend taking a look at the Fulton F2 Swing-Up Jack # F1413230134 for your pop up trailer. This is a really nice, heavy-duty jack that features a static capacity of 2,000 pounds. It includes an articulating footplate that provides superior stability (even on unlevel ground), a swivel system for easy lifting and transport, and a maintenance-free construction with its lubricated, 1-piece gearbox. It has a lift height of 10 inches and will fit 4 inch and 5 inch trailer frames. The bolt-on...
    view full answer...
  • Retracted Length of Fulton F2 Swing-Up Jack # F1413230134
    I went out to our warehouse to take a look at the Fulton F2 Swing-Up Jack # F1413230134 referenced in your question. With the jack fully retracted, I measured a distance of right at 25 inches from the bottom of the footplate to the top of the jack. This swivel jack features a a static capacity of 2,000 pounds and a lift height of 10 inches. I have attached a short video demonstration on this jack that you can also check out.
    view full answer...
    Image 1 for
  • What is the Retracted Height of Fulton F2 Marine Trailer Jack F1413230134
    I spoke with my contact at Fulton, and the retracted height of the # F1413230134 jack from bottom of foot to center of mounting plate would be 5-3/8 inches when the bracket is at the lowest setting. When the bracket is slid to the highest setting, the distance would be 18-11/16 inches. The mounting bracket has 13 inches of adjustability, which will give you some flexibility to match the height of the jack to your particular trailer frame.
    view full answer...
  • Recommended Fulton Trailer Jacks With Footplate
    We sure do have what you are looking for. We offer 4 Fulton Swing-Up Jacks with pivoting footplates. The difference is either in the mounting preference or the size of the trailer frame. For a weld-on installation, I recommend part # F1413200334. This will fit up to 5 inch frames, has 2,000 lbs static capacity, and features a 7 inch diameter footplate. We also have a bolt-on jack that will work with either 4 or 5 inch frames, and has all the same features. That is part # F1413230134....
    view full answer...
  • Ground Clearance Using Fulton F2 Swivel Trailer Jack with Pivoting Footplate
    The Fulton F2 trailer jack # F1413230134 can get pretty low. I went out to the warehouse and pulled one of these jacks to measure it. The mounting bracket is adjustable so with it in the lowest position from the bottom of the foot to the bottom of the u-bolt hole using the small u-bolt measures 3-7/8 inches. With the bracket all the way up it is 17 inches. If using the larger u-bolt is measures 3-1/8 inches from bottom of foot to bottom of lower mounting hole. And In the highest position...
    view full answer...
    Image 1 for
  • Swivel Trailer Jack with Enough Lift to get 20 Inches from the Ground to Bottom of Trailer Frame
    With Pro Series Round, Snap-Ring Swivel Jack # PS1400300303 installed it will measure 21 inches from the center of the mounting bracket to the bottom of the foot. When fully extended that would make the distance from the ground to the bottom of the frame where the jack is installed 19 inches on a 4 inch tall frame. What I recommend is Fulton F2 Swing-Up Jack # F1413230134. This jack has a mounting bracket that can be raised or lowered on the outer jack leg. This means you can adjust the...
    view full answer...
  • Will Bulldog Jack BD150152 Fit 2" Jack Support Mount on Trailer
    I can help you with choosing a side frame mount jack for your trailer. The Bulldog Round Jack Sidewind - 15" Lift - 2,000 lbs part # BD150152 has an outer tube diameter of 2-1/4" so it does not fit the jack mount of your trailer. We currently do not carry a 2" outer tube jack that will fit your application. You may need to remove the existing mount and use Fulton F2 Swing-Up Jack w/ Pivoting Footplate part # F1413230134 which bolts to the trailer frame as long as it's 4" or 5". I have...
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • Is There a Fulton F2 Trailer Jack that Has a Foot Plate instead of Wheel Casters
    Yes we have the Fulton F2 jack part # F1413230134 that can fit your frame dimensions and instead of having a wheel setup on the bottom has a swiveling foot plate.
    view full answer...
  • Bolt-on Swivel Trailer Jack Recommendation
    It sounds like you only want to use the mounting bracket from the Trailer Valet # STC-V211. But there are swivel jacks that you could use that would not require having to buy two jacks such as # PSEJ10000101 or # F1413230134. I have included a link to the jacks I think would be a better option.
    view full answer...
  • 2,000 lb Rated Trailer Jack that Bolts on To Side of Trailer Frame that Swivels and Has Sidewind
    We have the Jack part # F1413230134 which matches your criteria. It's a swivel side-mount trailer jack that bolts on, has a 2k capacity and a sidewind handle. Other option is the Bulldog part # BD154102 which costs a bit less.
    view full answer...
  • Swivel Jack with Footplate for Trailer Frame that Measures 4-Inches Wide
    The Fulton F2 trailer swivel jack # F1413230134 that you referenced is an excellent choice for your trailer frame that measures 3-inches wide and 4-inches tall. This jack features a pivoting foot plate with ball-and-socket connection for sure footing on uneven surfaces and it includes all required u-bolts and mounting hardware. A product review video is linked for reference.
    view full answer...
  • Recommended Bolt On Side Winding Jack With A Footplate
    The closest option we have is the Fulton F2 Swing-Up Jack w/ Pivoting Footplate - 4"-5" Frames, Sidewind, Bolt On - 2,000 lb # F1413230134 which has a bolt on mount that fits 4" to 5" frames, and has a foot plate like you were wanting. This option has the same 2000lb capacity as the # DL22686 you were looking at without needing to weld anything. I included a video of the # F1413230134 for you to take a look at.
    view full answer...
  • Is the Mounting Pattern on the 1,600 and 2,000 Pound Fulton F2 Swing-Up Jacks the Same
    Yes, the Fulton F2 Swing-Up trailer jack (2,000 pound) # F1413200334 will have the same 3.44 inches by 4.44 inches center to center bolt hole measurements as the Fulton F2 Swing-Up trailer jack (1,600 pound) # F1413130334. I also called our representative at Fulton to confirm. We also have a bolt-on jack that will work with either 4 or 5 inch frames, and has all the same features. That is # F1413230134. I included a short video review and helpful article for you too.
    view full answer...
  • Sidewind Swivel Jack Recommendation for a 2014 StarCraft Camper Trailer with 700 lb Tongue Weight
    I think your best option is going to be the Fulton F2 Swing-Up Jack with Footplate, # F1413230134. Like the other Fulton F2 jacks, it does have a higher price point, but it is one of the highest quality jacks on the market. Also, it is the only bolt-on swivel jack with a sidewind crank handle and a foot plate that we offer at this time. This jack was designed to fit 3 inch wide trailer frames, so you will want to use a 1 inch spacer to take up the gap for the u-bolts. The mounting plate...
    view full answer...
  • Swivel Jack with Wheel for a Boat Trailer with Swing-Away Tongue
    To pick out the best jack for your application you will definitely want to find out what the Tongue Weight (TW) of your trailer is when your boat is loaded on it. You can find this using a tongue weight scale like # e99044 or the method of using a bathroom scale which you can check out in the attached article on TW. We do have a Swing-Up option for a jack that has a wheel. The Fulton F2 # F1413040134 uses a bolt-on installation like your current jack and has a TW rating of 1,600 lbs. To...
    view full answer...
    Image 1 for Image 2 for
  • Heavy-Duty Trailer Jack Recommendation
    Typically the tongue weight and the height needed to clear the towing vehicle coupler are the considering factors for choosing an appropriate trailer jack. It is recommended to choose the jack has a higher capacity than the tongue weight of your trailer. The jack should provide enough lift to clear the vehicle coupler when in a level position by 4 inches. If your gross trailer weight is 4,700 pounds then the tongue weight of that would be estimated at approximately 10 to 15 percent which...
    view full answer...
    Image 1 for
  • Replacement Trailer Jack to Replace 2,000 Pound Fulton Jack
    The Fulton jack we carry that's closest to your current one is The Fulton F2 # F1413230134. It has a static capacity of 2,000 pounds and 10 inches of lift height. It's a bolt-on jack that fits 4 and 5 inch trailer frames. I've linked a review video fo you to take a look at.
    view full answer...
  • Replacement Trailer Jack for 2003 Coachmen Clipper Sport 106
    It looks like from the photos I was able to find, the 2003 Coachmen Clipper Sport 106 will take a standard A-frame trailer jack. For that reason you can use something like the Buyers Products A-Frame Jack w/ Support Foot - 15" Travel - 2,000 lbs # 3370091260, which will work with trailers that have a tongue weight of up to 2000-lbs-so it's well rated for your trailer. With that said, if you've got a battery to connect to I recommend an electric A-frame trailer jack like the Stromberg Carlson...
    view full answer...
  • Can Dual Wheels On Fulton F2 Jack Be Replaced With The Swivel Foot Plate?
    I currently only see the foot plate offered with the Fulton F2 Swing-Up Jack # F1413230134 and not offered as a replacement part. We do have the Replacement Wheel # F500138 for the dual wheel style Jack # F1413020134
    view full answer...
  • Can Wheels Be Easily Removed From Fulton F2 Swing-Up Trailer Jack # F1413040134
    The wheel on the Fulton F2 Swing-Up Trailer Jack # F1413040134 are not really designed for easy removal. In your specific application a better option is the Fulton F2 Swing-Up Jack w/ Pivoting Footplate # F1413230134.
    view full answer...
  • Could Spacer be Used to Install Fulton F2 Swing-Up Jack on 2 inch by 2 inch Trailer Frame
    If you were able to put spacers on your trailer frame so that the 2 by 2 frame gets converted to basically a 4 inch or 5 inch frame the Fulton jack part # F1413230134 would fit and work well. This is going to be your most ideal solution.
    view full answer...
  • Can Fulton F2 Trailer Jack that Attaches with U-Bolts Attach to Trailer Frame that is 5x2 inches
    The Fulton F2 Swing-Up Jack w/ Pivoting Footplate # F1413230134 that you referenced will fit your trailer frame that measures 5 inches tall and 2 inches wide. Since your frame is a bit narrower what you'll need to do is use a metal spacer between the frame of the trailer and the u-bolts to take up the additional space.
    view full answer...


< Previous
12



Do you have a question about this Trailer Jack?


Info for this part was:

Employee Sarah L
Expert Research:
Sarah L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Lindsey S
Written by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee David F
Installed by:
David F
Employee Laura H
Updated by:
Laura H
Employee Shelly K
Updated by:
Shelly K
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Dustin K
Video Edited:
Dustin K

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.