This 15" x 5" trailer wheel has 5 on 4-1/2 bolt pattern with a 3.19" pilot hole diameter. The gunmetal gray, rustproof aluminum wheel features an open-spoke design with a machined face.
Features:
Specs:
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
Measuring the distance from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, everybody. This is Jeff at etrailer.com. Today we're gonna take a look at this Americana 15 inch by five inch AM03 Series Gunmetal Gray Machined Aluminum Trailer Wheel with the five on four and a half inch bolt pattern. Now this aluminum wheel is very durable, lightweight, and rustproof. As we mentioned, this is an AM03 series wheel, which you can see, is a five open spoke design and a gunmetal gray finish. And if you look around the edge of the spokes, they do use a machine silver face on the edge here.
Provides a nice bold, sleek look. And in the gunmetal gray finish on the wheel is a nice, bright, glossy finish. They do use the clear coating on both the front, and even the back of the wheel to protect the finish. And a few dimensions on this, the diameter on this wheel is 15 inches, and that's always measured inside to inside. So to measure that, if we take a tape measure, put it on inside to inside, you can see there's your 15 inch diameter.
The width, this is a five inch wide wheel, and when you measure that, it's the same way. It's bead seat to bead seat. So inside to inside, there's your five and a half inch width, or five inch width. Bolt pattern on this wheel is a five on four and a half inch bolt pattern. And if you wanna measure that on a wheel like this, that is a odd number of lugs, in this case, five, then since the holes don't line up, what you want to do is pick any hole, let's say this one, and then you're gonna measure across to either one of the holes right across from it.
But when you measured it, it's from the center of the starting hole to the furthest edge of whichever hole you measure to. So center to the furthest edge is gonna be four and a half inches. So this bolt pattern is a five lug, four and a half inch bolt pattern. This wheel does use the wheel lug size of a half inch by 20. Weight capacity on this wheel is 2,200 pounds.
And one of the nice features I like about this wheel is they do use steel inserts in the lug nut wells, and that's where you tighten down your lug nuts. What those steel inserts do is they'll keep the wheel securely in place on the trailer hub, and they'll prevent those holes from elongating or wearing down. Eliminates the need for constant re-tightening of your lug nuts. If you notice, the center cap is not included. If you want to have a center cap, we do sell those separately. When you get a center cap, you do wanna make sure it has the same diameter as the pilot hole. This pilot hole diameter is 3.19 inches. Now this wheel does meet the DOT, Department of Transportation specifications, and at SAE J2530 standards. But that's gonna do it for the review on this Americana 15 inch by five inch AM03 Series Gunmetal Gray Machine Aluminum Trailer Wheel.
Average Customer Rating: 5.0 out of 5 stars (5 Customer Reviews)
This 15" x 5" trailer wheel has 5 on 4-1/2 bolt pattern with a 3.19" pilot hole diameter. The gunmetal gray, rustproof aluminum wheel features an open-spoke design with a machined face.Perfect match for wheels on 2024 colorado. Trailer now matches truck. Fair price and fast shipping.
My Original Order Of Aluminum Wheels That Were Shipped To Me Were Damaged During Processing Or Shipping. Unable To Determine Which. I Called "ETrailer" & Was Dealing With "Joanne" To Get the Problem Handled ASAP. Joanne Was Very Professional & Helpful Thru The Complete Process. A New Set Of Wheels Were Shipped Out To Me & Everything Was Good (No Damage). Once Again I What To Thank "Joanne" For All Of Her Help & Assistance. Thanks Again - Art.
Customer Service is easy to b deal with. Ordered a pair of wheels, was less than happy with, talked to them, they sent a return tag via email, took it to our UPS, sent back, ordered these. Got refund for 1st pair by the time the 2nd pair was delivered.
Really happy with the these wheels as well as the etrailer.com team!!
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.