What Wheel Bearing Fits a Timken 07204 Race With a 1 Inch Axle
Question:
What Wheel Bearing Fits a Timken 07204 Race With a 1 Inch Axle
asked by: Jimrenkenberger R
Expert Reply:
From what I could find, the Timken 07204 Race has an outer diameter of 2.047 inches. The race that come with # DL21792 would have an outer diameter of 1.980 inches. This would be the closest option we have available.
I can suggest a few replacement hubs that fit the 1 inch axle, however. If your wheels have a 5 on 4 1/2 bolt pattern, you would need either # AKHD-545-2-1K or # AKIHUB-545-2-1K. If you have a 4 on 4 bolt pattern, you would need # AKIHUB-440-2-EZ-1K. You can verify the bolt pattern by measuring from the center of one lug bolt to the center of the lug bolt right next to it. The 5 on 4 1/2 pattern would measure at 2 5/8 inches.
With these not being exact fits for you Timken Race, it is always a good idea to verify a few things before moving forward. The Spindle # TRU59FR is what all 3 hubs would fit on and shows all the measurements needed to confirm their fitment on your axle.
Products Referenced in This Question
Trailer Hub and Drum Assembly - 2K Axles - 7" Diameter - 5 on 4-1/2 - L44643 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
BT8 Spindle for 2,000-lb Trailer Axles - 1-3/8" Diameter
- Trailer Spindles
- Standard Spindle
- 8-1/4 Inch Long
- 1-3/8 Inch Diameter
- Round
- For 2000 lb Axle
- TruRyde
more information >
Product Page this Question was Asked From
Bearing Kit with Grease Cap for 1" BT8 Spindle, L44643 Inner/Outer Bearings, 34823 Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44643
- Race L44610
- 2000 lbs Axle
- 2500 lbs Axle
- etrailer
more information >
Continue Researching
- Search Results: 480 400 8 tires
- Shop: Kenda Loadstar K371 Bias Trailer Tire - 4.80/4.00-8 - Load Range B
- Video: Kenda Tires and Wheels - Tire Only - AM10002 Review
- Q&A: Trailer Hub Seals with 1.250 Inner Diameter and 1.975 Outer Diameter.
- Q&A: How Thick is Trailer Hub Grease Seal 168255TB
- Article: Trailer Tire Sizing
- Shop: Trailer Hitch
- Q&A: What is the Difference Between Load Range B and C Trailer Tires
- Search Results: l44649
- Shop: Kenda 4.80/4.00-8 Bias Trailer Tire with 8" White Wheel - 5 on 4-1/2 - Load Range B
- Shop: Trailer Wiring
- Article: Most Popular Wheel Bearings
- Video: etrailer Trailer Idler Hub Assembly Review and Installation
- Shop: Kenda 4.80/4.00-8 Bias Trailer Tire with 8" White Wheel - 4 on 4 - Load Range B
- Shop: Gooseneck Hitch
- Search Results: am10002
- Shop: Kenda 4.80/4.00-8 Bias Trailer Tire with 8" White Wheel - 4 on 4 - Load Range C
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Kenda K371 Bias Trailer Tire - 4.80/4.00-8 - Load Range C
- Shop: Americana Rubber, Snap-In Valve Stem - 1-1/4" Long - Up to 65 psi
- Q&A: Timken Replacement Bearing Solution for Setup with Part Numbers L44649 471750 L44610
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: Correct Bearings for AL-KO Axle On Palomino Pinto Trailer
- Q&A: Replacement Hub Assembly for Older Boat Trailer with 4 Bolt Pattern
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: My Trailer Hitch Doesn't Fit