Summer Starts Here - Save up to 70%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This hub-and-drum assembly fits 3,500-lb axles with #84 spindles. Compatible with electric or hydraulic brakes. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included.
Features:
Specs:
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
Average Customer Rating: 4.6 out of 5 stars (23 Customer Reviews)
This hub-and-drum assembly fits 3,500-lb axles with #84 spindles. Compatible with electric or hydraulic brakes. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included.I had a tough time finding the right hub as mine happened to be an odd ball nobody had or could get! But thankfully I called the etrailer support and they where able to reassure me that this was a match! I wish it came with a new washer and castle nut but I am still grateful for the help and peace of mind knowing I’m not going to be dead in the water ever again and that I have what I would consider a good team behind my business when working with e trailer! I have bought many things from this site and I can tell you they are the best!
About a year ago I had purchased a Bobcat and didn't put much thought into the trailer that I already had to haul it with. Thanks to etrailer I was able to do all the upgrades needed to haul heavy loads safely. I purchased a set of four drums, a set of four new brakes, a set of four new 6000 pound springs and all new U-bolts. Everything I just listed was changed out in one day with no problems at all. I strongly recommend that you use the formula for lug spacing if you're not sure what you have. Thank you Laser at etrailer for the help on my oops. I've recommend etrailer to several people who have needed replacement parts and have had the same luck I did, Awesome service and a short shipping wait time.
etrailer customer service for returns and their products as a whole are third rate at best. Every product arrives damaged from terrible packaging and handling by etrailer. Customer service sometimes responds and their return policy is garbage at best. buy elsewhere
My project was to change my hydrolic brakes to electric, my first parts delivery was wrong but I didnt worry because e-trailer really backs up there service. After explaining my problem they went right to work to correct things and it didn't cost me any extra. The job is complete now and the brakes work great! Thank you E- Trailer.
After twenty some years, I finally installed brakes on my utility trailer. I've owned the trailer since new. I used it for years to haul my stock car, always wishing I had brakes on the trailer, but never got around to installing them. The Drums I ordered were the 845476UC3 units. They are very well built, made in the USA . They fit the brake assemblies perfectly. Just from their weight, construction and with the protective coating, they should last a long time.
I worked with Wayne H. to get the correct drums shipped to replace the incorrect ones that I ordered (my mistake). They were available on Sunday and was very helpful to troubleshoot the issue while I was in the shop with the trailer. The replacement parts were provided quickly and I sent back the old ones in the same packaging. Quick and easy. Thanks!!
wont be able to tell until I carry a load and it doesn't break. (looks good) One thing I have found on outher hubs and these hubs. the hub cap is flimsy and very frustrating and ends up damaged (put the dirty old ones back on) Susanne thank you and the outher sales people for helping me get the correct drums.
Easy installation and the brakes work great! The etrailer installation video helped alot.
Very pleased with the knowledge,assistance and guidance Kevin provided me with my purchase. Items shipped the same day and arrived in 6 days. Trailer break items were all the proper size and fitted perfectly. Job well done, thanks a million.
The hub that showed up was 4 1/2" but the box was marked 4 3/4".
Sierra K.
9/1/2021
I apologize for this mistake! Customer Service will make this right.
One year later the hub is performing fl awlessly.
works like they should...gives me confidence that I can stop even with heavy load..
Everything was exactly correct. Works g reat
Arrived in a timely manner and fit grea t!
Fit like it was from the factory
Very good brake setup easy to install.
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Best A.
11/10/2023
Still going strong! Thanks again to the support staff with Etrailer keeping my business going when nobody else coul!