Dexter Axle Identification and Replacement Parts for 2-3/8 Inch Diameter Axle
Question:
I just bought an older used trailer and I am trying to replace the bearings, races and seals. I am trying to ID the weight rating for the axle as well as make sure I am buying the correct bearings for the hub. The axle is a P15-SLR Serial: D1853760 2 3/8 housing #84 Spindles The hub is a 5x4.75 with the numbers 356 on the back of the hub. I have looked through several articles and it appears that there are some difficulties identifying axles manufactured before 1991. Any help would be appreciated.
asked by: RYAN W
Expert Reply:
Your axle is a 3,500 lb axle. The Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-3/4 # 845476UC3 is the hub you have with the bearings that fit your #84 spindle. The Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-3/4 - Pre-Greased # AKHD-5475-35-K is also a fit, but if you just want the bearing kit use # BK2-100.
Products Referenced in This Question
Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-3/4
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 5 on 4-3/4 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-3/4 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-3/4 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- EZ Lube
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Replacing Dexter Idler Hub 008-258-05 with Hub and Drum Assembly # 8-257-5UC3
- Q&A: Replacement Bearings and Seals for 3,000 lb Dexter Axle
- Q&A: How To Find The Correct Replacement Bearings and Seals For a 1998 Nuway 5x8 Trailer
- Article: Most Popular Wheel Bearings
- Q&A: Replacement for Dexter 8-248 Idler Hub
- Q&A: Right Replacement Hubs for a Trailer with 3500 Pound Axle and 5 on 4-1/2 Bolt Pattern
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Replacement Trailer Hub for Dexter 8-248
- Q&A: Replacement Trailer Hub Assembly for Dexter 8-248 Hubs
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Tire Sizing
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub