Gen-Y Phantom X Adjustable Ball Mount w/Stacked Receivers - 2" Hitch - 10" Drop/Rise - 7K

See what our Experts say about this Gen-Y Hitch Trailer Hitch Ball Mount

• Recommended Adjustable Ball Mount for Accessories on a Lifted Truck
  I have a solution for you. You will want the Gen-Y Phantom X Adjustable Ball Mount w/Stacked Receivers item # GY59VR. This adjustable ball mount will give you the ability to carry up to 700 lbs of tongue weight. It has 5 different height options for installing your motorcycle carrier and it has a maximum drop of 10". The Gen-Y Phantom X Adjustable Ball Mount w/Stacked Receivers item # GY59VR fits a 2" receiver and has a 7,000 lbs towing capacity. Using this ball mount will not reduce...
  view full answer...
• Is There Incremental Drop Difference With Platform Orientation of Gen-Y Phantom X Ball Mount
  The ball mount platform of the Gen-Y Phantom X part # GY59VR that you referenced whether in the rise or drop position will put the height right at the top or bottom of the hitch openings. So what that means is that if you picked the third opening from the top but had the platform in the rise position it essentially would be the same height as the drop position of the second opening. So in the drop position in the 4th slot it would be an 8 inch drop, and in the rise position of the same...
  view full answer...
• How do I Get My Trailer Level when Using a Reese Weight Distribution Hitch on My 2021 Ford F-150?
  When trying to determine leveling for a trailer and the tow vehicle, the connection should be within 1-1/2 inches of height. As long as you are within this height, it will be safe to travel. If the connection is way off, the best bet is to use trailer suspension on the vehicle or on the trailer itself. For example, on your 2021 Ford F-150, if you install air bags like the Firestone Ride-Rite Air Helper Springs - Double Convoluted - Rear Axle # F2582, this will add height to your tow vehicle....
  view full answer...
• Can Gen-Y Ball Mount # GY59VR be Used With Hitch Extender
  You can use a hitch extender with the Gen-Y Ball Mount # GY59VR, just keep in mind an extender will reduce the capacity of your trailer hitch receiver by 50 percent. So for example if your hitch had a 5,000 lb towing and 500 lb tongue weight capacity it would be limited to 2,500 lbs towing and 250 lbs of tongue weight with an extender. If that works for you then use the 7" Hitch Extender # HE06. This doesn't come with a hitch pin so if you need one use part # ML1465DAT.
  view full answer...
• Can I Carry Both a Bike Rack and Cargo Carrier On The Receiver Of My 1994 Chevrolet Van?
  I recommend the Gen-Y Phantom X Adjustable Ball Mount w/ Stacked Receivers for 2" Hitch # GY59VR. This will give you the ability to carry up to 700lbs of tongue weight and will spread out your Thule bike rack and a 60x24 etrailer Cargo Carrier # e98874. Be sure not to exceed the vehicle or receiver weight capacity on your 1994 Chevrolet Van. The etrailer Cargo Bag w/ Mounting Straps # 988501 will help to keep your cargo clean and dry while you travel. The Malone 2" Dual Purpose Hitch...
  view full answer...
• Is Dual Sway Control Bracket Compatible With Gen-Y Phantom X Adjustable Ball Mount
  Yes, but you would have to add the replacement 2-ball mount for the standard Gen-Y in order to secure the bracket. So what you would need is the following: - Gen-Y Phantom X Adjustable Ball Mount w/ Stacked Receivers for 2" Hitch - 10" Drop/Rise # GY59VR - Replacement 2-Ball Mount for Gen-Y Adjustable Ball Mounts # 325-GH-031 - Dual Sway Control Bracket for Gen-Y Adjustable Ball Mounts with 2" Receivers # 325-GH-300-1 So you could do that in order to use a friction sway control system...
  view full answer...

Do you have a question about this Trailer Hitch Ball Mount?