bing tracking image
  1. RV Cargo Carrier
  2. Mount-n-Lock
  3. Cargo Carrier
  4. Generator Carrier
  5. Bumper Mount
  6. 30 Inch Deep
Mount-n-Lock GennyGo Generator and Cargo Carrier for RV Bumpers - Steel - 200 lbs

Mount-n-Lock GennyGo Generator and Cargo Carrier for RV Bumpers - Steel - 200 lbs

Item # MNT54FR
Retail:$400.69
Our Price: $349.95
You Save: $50.74
RV Cargo Carrier
Shipping Weight: 25 lbs
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Rugged, all-steel cargo carrier lets you haul your generator to the campsite and gives close access to an outlet without unloading. Durable, 24" x 24" assembly holds up to 200 lbs. 60 Tie-down points help secure your cargo. Great Prices for the best rv cargo carrier from Mount-n-Lock. Mount-n-Lock GennyGo Generator and Cargo Carrier for RV Bumpers - Steel - 200 lbs part number MNT54FR can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (95)
  • Q & A (0)
  • Photos

Mount-n-Lock RV Cargo Carrier - MNT54FR

  • Cargo Carrier
  • Generator Carrier
  • Bumper Mount
  • 30 Inch Deep
  • Mount-n-Lock

Rugged, all-steel cargo carrier lets you haul your generator to the campsite and gives close access to an outlet without unloading. Durable, 24" x 24" assembly holds up to 200 lbs. 60 Tie-down points help secure your cargo.


Features:

  • Cargo carrier mounts to your RV bumper to haul your generators and other equipment
    • Mounts on either side of your bumper for closer access to an outlet
    • Helps reduce clutter and frees up space inside your RV
    • Keeps wet and muddy items from dirtying up your interior
  • 60 Tie-down points give you tons of options to secure your gear
    • Perimeter tie-down points are perfect for large propane tanks and coolers
    • Center tie-down points let you secure small camping accessories or duffle bags
  • Expandable design lets you lengthen your platform up to 8' (additional trays and support arms sold separately)
  • 3 Different assembly options to accommodate heavier loads, body overhang, and larger cargo
  • Steel tray and support arms give you a durable design that resists rust
  • Simple, bolt-on installation
    • Support arm brackets secure around RV bumper
    • Mounting hardware included
  • Made in the USA


Specs:

  • Fits:
    • Square RV bumpers: 4", 4-1/2", 5-5/16", and 6"
    • Rectangular RV bumpers: 4" to 6" tall and 2" to 6" deep
  • Maximum capacity: 200 lbs when evenly distributed
  • Overall tray dimension: 24-1/4" long x 24-1/4" wide x 2-5/8" tall
    • Interior dimensions: 24" long x 24" wide x 2-5/8" tall
  • Support arm dimensions: 20-1/4" long x 1-5/8" wide x 4-5/8" tall
  • Carrier weight: 24 lbs
  • Limited lifetime warranty


Note: Bumper weight capacities vary by manufacturer. Please be sure to verify the weight capacity of your bumper with the manufacturer prior to loading.


Tie-down Points

Tie-down Points

Whether you're hauling a small suitcase, large 100 lb generator, or gear for a weekend camping trip, this dynamic cargo carrier tray has over 60 different tie-down points (tie-down straps sold separately) to strap down your cargo from any angle, giving you the security you want traveling on bumpy gravel roads, or flying down the highway over long distances.


Expandable Design

Expandable Design

This highly versatile, expandable design allows you to lengthen your cargo-carrying platform from 2' all the way up to 8' (additional trays and support arms sold separately). You can safely haul and store multiple generators or propane tanks on one side and all your camping gear and coolers on the other side.


3 Different Assembly Options


Compact assembly mounts your cargo tray over your bumper to bring your tray 5" closer, giving you more strength to haul heavy generators, propane tanks, or bundles of firewood. This setup will also provide additional clearance space around your RV.


Standard assembly mounts your cargo tray just off your bumper to accommodate RVs where the body overhangs the bumper. This setup allows you to invert your side rails to combine trays and expand your platform up to 8' (additional trays and support arms sold separately) or to hook up a ramp to load your bike.


Extended assembly frees up an additional 5" of space between the back of the tray and your RV to allow a longer cooler or camping chair to overhang your bumper. This setup allows you to invert your side rails to combine trays and expand your platform up to 8' (additional trays and support arms sold separately) or to hook up a ramp to load your bike.



1GSAS Replacement RV Bumper-Mounted Support Arms for Mount-n-Lock GennyGo Cargo Carrier - Steel - Qty 2

1GGPS Replacement Cargo Carrier Tray for Mount-n-Lock GennyGo Generator Carrier - Steel

Installation Details MNT54FR Installation instructions



Customer Satisfaction Score:


Customer Reviews

Mount-n-Lock GennyGo Generator and Cargo Carrier for RV Bumpers - Steel - 200 lbs - MNT54FR

Average Customer Rating:  4.7 out of 5 stars   (95 Customer Reviews)

Rugged, all-steel cargo carrier lets you haul your generator to the campsite and gives close access to an outlet without unloading. Durable, 24" x 24" assembly holds up to 200 lbs. 60 Tie-down points help secure your cargo.

by:

Was very pleased with the generator car rier.



by:

Great product, stronger than I anticipated. Fairly easy to assemble. I did have to cut the support arm ends where they go over the bumper so they didn't hit the trailer cab,no big deal.
Happy with my purchase.



by:

It’s a nice cargo trailer but it’s too small so it don’t get to use it

Etrailer Expert

Jenny N.

6/14/2023

You can expand the cargo carrier length wise from 2 feet up to 8 feet by purchasing additional trays part # MO97VR and support arms part # MO57VR if you need more room.



by:

Normally I'm not one to leave negative reviews, but you guys sent me an email so here I am.

To be blunt, I get where they were going with this design but it's not nearly sturdy enough. My generator weighs 134 lb and is a little propane 3000W. It didn't matter how much I tightened to the clamp bolts, this thing was not even close to strong enough to hold the generator. The platform seems like it was acceptably strong, but the means of mounting the platform was terrible. I tried to adapt it with some stronger u bolts but the little struts under the platform couldn't quite handle it either. The metal was thin enough that even with 1 in washers, it's slowly began bending.

After about 2000 miles of stopping every couple hours and screwing with it, I just took it off and threw it away.



by:

Took my 86 lb generator acrossed the country. Did exactly what they said. I love the multiple tie down spots, makes it easy to fasten down my geni and keep it tight.would recommend this product to everyone.



by:

Easy to mount, very sturdy. I’ve used it to carry my two Honda generators, or if I know I have power, my portable Traeger and pellets.



by:

We were not expecting the vibration when our generator was running. The entire trailer rattled and couldn't wait to turn it off.



by:

My wife ordered this for me for Father’s Day. And I got to say it’s not what I would expect. Too many bolts holding it together. Really would like to return for another product.



by:

The product was well built and assembly was easy .



by:

My package arrived on time and it was excellent condition.



by:

At first it seems a little flimsy, but after getting everything put together it firms up to help you feel more secure. Instruction options could be clearer, but if you've ever had to put something together, you'll figure it out.



by:

Easy to install and very secure product! Glad to still see quality products - Thank you



by:

Took me about 20 minutes to assemble and mount. Was quick and easy and very solid construction.



by:

Harold

7/13/2022

Great. Holds up well



by:

Love it! A couple friends have now purchased theirs!



by:

Very good unit fit perfect for my 3009 Honda



by:

Worked as advertised. Very strong.



by:

It arrived earlier than predicted. Haven’t put it together yet but it looks like it should be pretty sturdy



by:

It’s great



by:



by:

Great service, and product



by:



by:



by:



by:


25
94
Show More Reviews

See what our Experts say about this Mount-n-Lock RV Cargo Carrier

  • Could Mount-n-Lock GennyGo Generator and Cargo Carrier for RV Bumpers Work with Tow Bar
    We've not heard of anyone successfully being able to flat tow a vehicle with the Mount-n-Lock GennyGo Generator and Cargo Carrier for RV Bumpers # MNT54FR. I think it would be most likely pretty problematic since it would be very likely there would be clearance issues with the tow bar unless for some reason the bumper was quite a bit higher than the hitch. If you had a lower vehicle and were using a drop high low adapter that would probably work out though.
    view full answer...
  • Will a Generator Carrier Fit on the Bumper of Our 2020 Coachmen Leprechaun with Flat-Tow Accessories
    In order to confirm whether you can fit a generator carrier on your back bumper of your 2020 Coachmen Leprechaun, it really depends on the dimensions of your rear bumper. I went ahead and did some research on your vehicle, and I discovered that the width of all options of the 2020 Leprechaun have an exterior width of 100 inches. Another relevant dimension is your towing equipment that you are using to flat-tow your jeep wrangler. With that being said, I recommend the Mount-n-Lock GennyGo...
    view full answer...
  • Can The GennyGo Generator and Cargo Carrier Support A Running Champion 3400 Generator While Running
    The Mount-n-Lock GennyGo Generator and Cargo Carrier for RV Bumpers # MNT54FR has a 200lb weight capacity so you shouldn't have an issue with the carrier holding your 96lb Champion generator. The only issue may with with the weight capacity of the bumper itself. You may want to beef up the structural integrity of your RV's bumper to ensure it can maintain the weight and handle the vibration of the the generator. That being said there's no issue with running the generator while it's on the...
    view full answer...
  • Recommended Mount-n-Lock SafetyStruts and GennyGo Generator Carrier 2022 Rpod 190
    The Mount-n-Lock SafetyStruts Standard RV Bumper Support Brackets, # MO22FR is used to reinforce 4" to 4-1/2" RV bumpers so as to carry generators and other heavy cargo. If your R-Pod has this dimension bumper, these will fit. For your inverter generator, I recommend the Mount-n-Lock GennyGo Generator Carrier, # MNT54FR for up to 200 lbs. or the # MNT44FR for heavier generator up to 400 lbs. Please note that bumper weight capacities vary by manufacturer so you should verify the weight...
    view full answer...
  • Correct Mount-n-Lock SafetyStruts for 2022 Grand Design Transcend Xplor 321BH
    The answer to your question will depend on your bumper. More than likely the # MO22FR will be the correct part for your Grand Design Transcend Xplor 321BH. If you have a tube frame with a bumper that is 4" - 4-1/2" wide then this will work as extra support for your carrier and generator. You can see this in the attached review video at the 2 minute mark. If you have an I-beam, S-beam, or single channel frame you want the universal # MO34VR instead. If you don't have a carrier already Mount-n-Lock...
    view full answer...
  • Recommended Small Bumper Mounted Cargo Carrier
    The 24x40 etrailer Cargo Carrier for RV Bumper - Steel - Folding - 500lbs # e99050 is the smallest version of our cargo carriers but we do offer the Mount-n-Lock GennyGo Generator and Cargo Carrier for RV Bumpers - Steel - 200lbs # MNT54FR which is 24" x 24" and utilizes the same mounting design.
    view full answer...
  • Recommended Bumper Mounted Cargo Carrier for Travel Trailer with Partially Recessed Bumper
    Due to the bumper being partially recessed under the RV, you wouldn't be able to attach the # e99050 cargo carrier as you wouldn't be able to slip the mounting brackets onto the bumper from above. This being said, we do offer a solution that would work great for you. I'd recommend the # MNT54FR GennyGo bumper mounted carrier. The carrier is 24x24, quite a bit smaller than the # e99050 carrier you'd looked at, but you could gang two of them together to have a 24x48 carrier that would work...
    view full answer...
    Image 1 for
  • Is The Rear Bumper On 2016 Lance 1985 Strong Enough To Support Carrying a Spare Tire?
    As Lance did not position the spare tire on the rear bumper I would say it is not strong enough to support any additional weight. We do have the Mount-n-Lock Heavy-Haul'r Replacement RV Bumper # MNT43VR which is rated for up to 500lbs and includes a stronger bumper tube and mounting brackets. This will allow you to add the Ultra-Fab Folding Spare Tire Carrier # UF15-954730 along with Cargo Tray # MNT54FR for additional gear.
    view full answer...
  • What is the Longest and Widest Option For a Bumper Mount Cargo Carrier on an RV
    It looks like you were looking at the bumper mount cargo carrier options for your RV. The 24"x84" etrailer Cargo Carrier for RV Bumper # e96ZR is the closest option to the 56" x 90" that you are wanting. You are not going to find a cargo carrier that extends out from your bumper 56". This is because it would extend too far out and cause extra stress, because the further the weight is extended the more stress it puts on the bumper. Technically you could get multiple of the Mount-n-Lock...
    view full answer...
  • Solution for Carrying a Small Generator on the Back of an RV
    I have a solution for you, but the # e99052 is not designed to be used as a standalone carrier; it would need to be used with the 24x60 etrailer Cargo Carrier for RV Bumper - Steel - Folding - 500 lbs # e99049 in order to carry any real weight. This carrier has a capacity of 500-lbs, so it would do well for carrying a generator. With that said, you may want to instead look at the Mount-n-Lock GennyGo Generator and Cargo Carrier for RV Bumpers - Steel - 200 lbs # MNT54FR, which has over...
    view full answer...
  • Compatibility of RV Bumper Platform Cargo Carrier on 4-1/2 Inch Square Bumper
    For your 4.5 Inch bumper with little clearance, the Mount-n-Lock GennyGo Generator and Cargo Carrier for RV Bumpers - Steel - 200 lbs # MNT54FR will require about 1-1/2 inches of clearance on the back side of the bumper for mounting. If you don't have that kind of space, then I recommend using the RV Bumper 2" Trailer Hitch Receiver - Clamp-On # S64025 which will require 7/8 inch between the bumper and RV. Then you can use a cargo carrier like # PS1040100 but you will be restricted...
    view full answer...
  • Recommended Bike Rack, Hitch, and Generator Carrier for a 2019 Shasta Phoenix
    Thanks for the pictures. The Ultra-Fab 2" Trailer Hitch Receiver for Trailer Frames # UF35-946403 you mention would be a great option for you since your trailer frame falls within the adjustable range and it has the beefed up tongue weight capacity you need. Since you mentioned you'd either like to carry a generator you can use the Mount-n-Lock GennyGo Generator and Cargo Carrier for RV Bumpers # MNT54FR which would bolt to your RVs bumper directly and has a 200-lbs carrying capacity. This...
    view full answer...
    Image 1 for Image 2 for
  • RV Cargo Carrier Solution For A Trailer That Has A Deeper Bumper
    Thanks for the picture, and the measurements! I took a look at your bumper, and it doesn't appear that the Mount-n-Lock GennyGo Generator and Cargo Carrier for RV Bumpers # MNT54FR will be a good fit for you. This cargo carrier will fit square and rectangular RV bumpers with a maximum depth of 6", and since you mentioned that your bumper is a notch over 7", this will not work. The best option I can offer for you, is to use a hitch mounted cargo carrier like the 22-1/2x49 Curt Cargo Carrier...
    view full answer...
    Image 1 for
  • Recommended Cargo Carrier With Spare Tire Carrier For Travel Trailer
    We have the 24x84 etrailer Cargo Carrier for RV Bumper, # e96ZR. From available online specs, the exterior width of the Wolf Pup is listed at 85". We also have the 64" # e83YR, a 60" wide version under part, # e99049 and a 40" version with # e99050. Each of these options are rated for 500 lbs. The Fulton Economy Spare Tire Carrier, # FETCLB0201 can be used with the cargo carrier to mount your spare tire under the cargo carrier. If you want a front of the travel trailer option for the...
    view full answer...

Do you have a question about this RV Cargo Carrier?


Info for this part was:

Employee Andrew K
Video by:
Andrew K
Employee Jameson C
Expert Research:
Jameson C
Employee Joshua S
Video Edited:
Joshua S
Employee Wilson B
Updated by:
Wilson B
Employee Amanda M
Edited by:
Amanda M
Employee Zach D
Installed by:
Zach D
Employee Adam Y
Written by:
Adam Y

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.