Flash Secure Adjustable 2-Ball Mount w Chrome Balls - 2" Hitch - 6" Drop, 7" Rise
(501 reviews)
Price: $289.33
In Stock
Flash Secure Adjustable 2-Ball Mount w Chrome Balls - 2" Hitch - 6" Drop, 7" Rise
Item # DTALBM6600
Retail:$327.29
Our Price: $289.33
You Save: $37.96
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (501)
- Q & A (0)
- Photos
Fastway Trailer Hitch Ball Mount - DTALBM6600
- Fits 2 Inch Hitch
- Adjustable Ball Mount
- Drop - 6 Inch
- Rise - 7 Inch
- 2 Inch Ball
- 2-5/16 Inch Ball
- Two Balls
- 10000 lbs GTW
- Class IV
- Fastway
- Built-In Locks
- Aluminum Shank - Silver
- Steel Ball
Self-contained locking pins in this lightweight, adjustable hitch deter theft. Go from a 6" drop to a 7" rise to swap between trailers. Tow up to 8,000 lbs with the 2" ball and up to 10,000 lbs with the 2-5/16" ball.
Features:
- Adjustable ball mount makes it easy for you to haul different trailers
- Ball height adjusts in increments of 1" so that you can easily switch between trailers with different tongue heights
- Reversible ball platform lets you swap between 2 different-size balls
- Convenient, self-locking system locks ball mount to receiver tube and ball platform to ball mount
- Built-in locks can't get lost like other kinds of hitch locks
- Lock seals are double-sealed to keep out water
- Resists corrosion
- Requires no maintenance
- Uses pick-resistant, tube-style keys (4 included)
- Ball mount is machined from a solid piece of aircraft-grade billet aluminum
- Solid aluminum produces a lightweight yet strong ball mount
- Avoids welds, which can cause weak points that might break
- Polished finish creates a high-quality appearance
- Solid aluminum produces a lightweight yet strong ball mount
- 2 Chrome-plated steel hitch balls included
- Made in the USA
Specs:
- Fits: 2" x 2" trailer hitch receivers
- Ball diameters: 2" and 2-5/16"
- Towing capacity:
- 2" Ball: 8,000 lbs
- 2-5/16" Ball: 10,000 lbs
- Tongue weight capacity: 1,000 lbs
- Maximum rise: 7" from the top of the hitch receiver opening
- Maximum drop: 6" from the top of the hitch receiver opening
- Distance from center of hitch pin hole to back of upright bar: 4-1/4"
- Distance from center of hitch pin hole to center of ball: 8-1/2"
- 1-Year limited warranty
Note: Due to the built-in self-locking hitch pin, this ballmount will not work in a 2-1/2" hitch with a reducer sleeve.
This cutaway view of the shank shows the locking mechanism in action. The locking pins extend out from the shank when the key is turned, locking the ball mount into the hitch.
The ball platform locks to the ball mount with an internal lock. When you unlock the platform you can slide it up or down to adjust the ball height. You can also slide the platform off, reverse it, and slide it back on to change ball sizes.
44-00-4600 Flash 6" Secure Locking 2" Shank 2" and 2-5/16" Chromed Balls
DT-ALBM6600 Fastway (Diversi-Tech) Flash ALBM Series Adjustable Locking Ball Mount - 6" Drop, 7" Rise Adjustable Hitch - Solid Billet Aluminum
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Flash Secure Adjustable 2-Ball Mount w Chrome Balls - 2" Hitch - 6" Drop, 7" Rise - DTALBM6600
Average Customer Rating: 4.8 out of 5 stars (501 Customer Reviews)
Self-contained locking pins in this lightweight, adjustable hitch deter theft. Go from a 6" drop to a 7" rise to swap between trailers. Tow up to 8,000 lbs with the 2" ball and up to 10,000 lbs with the 2-5/16" ball.by: Tony H.05/14/2014
Very strong, easy to install and very secure. Yes a bit pricey, but well worth the money. I did notice there was what I thought was an unusual amount of play in the receiver.
I called etrailer and Marcia was so very helpful and very concerned that I may have received the wrong product. She even called the manufacturer and found out what the changes that were made by the manufacturer which made the pictures incorrect. My hat is off to Marcia and all the folks at etrailer
by: larry f.08/04/2016
ball mount fits loosely in the receiver so that the pins that extend out from the ball mount shaft through the holes in the receiver don't extend out far enough, for my liking.
This is because since the ball mount shaft has so much play, it will shift to one side. Then, the pin on the other side does not extend all the way out of the hole so that it is not flush. True, i am being paranoid. However, i imagine a case like a crash where enough force could pull the shaft out from the not fully extended pin side to release the trailer to wreak more damage.
I would just feel more secure if the pins went out further through the receiver or the shaft was not so loose.
Otherwise, i really like the product a lot... enough to give it four stars... :o)
Larry F.
8/4/2017
the receiver hasnt been used a lot... but so far, it is still working well.
by: JimC02/22/2013
Good workmanship. It will be perfect for my trailering.
All that I expected save one detail...
The hitch has two locks - one for the receiver and one for the adjustable ball assembly. It would be nice if the locks were keyed the same. I always worry about losing my hitch keys. Now I have another key to worry about.
Jimc
2/27/2014
Super investment. Worth the money.
by: Andy04/08/2013
I recently purchased a 2013 GMC 2500 Denali It comes with a 2.5" hitch with and adapter to make it down to a 2" hitch.. Unfortunately this locking device extends out on each side only far enough for the 2" adapter and not into the 2.5" frame hitch. I suppose i will have to find one that has a hole all the way through for a lock..
Jarit
7/22/2014
Hello Andy I have 2014 GMC denali 2500hd and from what I understand is that the locking pins that come out are not long enough to lock into the 2.5 receiver?
Rachael H.
7/23/2014
Yes, that is correct. This adjustable ball mount is intended to be used in 2 inch hitch applications. The Diversi-Tec # DTALBM6625 is the same configuration as this ball mount but it is intended to be used in 2-1/2 inch receivers.
by: Trevor S07/01/2015
High quality hitch. Very easy to use. I really like that it is one key for the lock and the adjustment. Really good looking hitch. Price is really good when you price out lock/ball/receiver and this one is adjustable with one key for all. This is our second one purchased after we tried the first one out.
Trevor S.
6/30/2016
We have two of these for our fleet of tow vehicles with 80k miles of towing with all working great.
by: Frank D10/24/2012
Required a bit of gentle sanding to fit into my receiver. I hated to scuff up the mirror finish. Looks great on my lifted Tacoma. The locking mechanism & reversible slide ball and no rattle design is genius. 4 keys, I like that too.
I wish more things were built this way.
Frank D.
4/24/2014
I stand by the 5 star rating, hitch has been with out fault. I miss calculated the and trailer sits at an angle, ocasionally thats a problem. I extended the trailer tonge 3ft. that eased the angle problem. I may sell this one and reorder a correct .
by: Rex H.02/13/2013
Best looking thing on my truck. Last ball mount was stolen so problem solved.Just hope locking mechinisum does not corrode.
Rex H.
2/18/2014
Still very happy with ball mount. Easy to change sizes. No corrosion however I do hit it with WD40 from time to time as preventive measure due to intense saltwater environment.
by: Kevin N.10/07/2016
This is a very good and versatile hitch. I have 3 trailers which each need a different height, 1 trailer uses a 2 inch ball and the others use a 2.5 inch ball, this hitch makes it very easy to change hitch height and ball size with no tools needed. The hitch feels solid when towing with it. I would highly recommend the purchase of the self locking, adjustable hitch.
by: Diane 01/13/2023
I will buy my trailer accessories ONLY from ETrailer! Prices and customer server are both awesome!!!!
by: Giles M02/25/2012
I agree with all, this product is built solid. Looked great out the box and worked great on the first pull. However, upon completing that first pull of less then 10 miles I found that the crome had been worn off the ball. This does not affect the operation it just means that it is no longer so great looking. Thought the crome would last longer!!
Tom
12/18/2012
Did you put adequate grease on the ball?
by: Henry 04/15/2020
ordered this for myself. after comparing a lot of hitches decided on this one and I am very happy with it
Henry T.
4/16/2021
Great
by: CHUCK LOWHAM04/29/2014
WOW WHAT A CHUNK OF METAL.
MAKES ME WONDER, HOW YOU GET EVERYTHING INTO THOSE 2 PEICES OF SOLID METAL.
HAVING LOCKS BUILT IN WILL SAVE ME ALOT. AS I HAD 2 KEYED LOCKS BEFORE, BUT WHEN YOU LOAN OUT TO FAMILY THEY DONT SOMETIMES GET PUT BACK ON AND GET STOLEN. YEA THANK'S
Chuck L.
4/29/2015
A GREAT HITCH. NO ONE IS STEALING THIS ONE. YOU HAVE A GREAT PRODUCT. KEEP UP THE GOOD WORK. IT LOOK GREAT TOO.
by: Richard03/20/2018
The ball mount in itself is awesome. Very solid and heavy and the build quality appears to be excellent. Unfortunately I had to return it and got instead the similar Fastway DTALBM6625-2S - which is for a 2-1/2 inch receiver and also the balls are stainless steel. The reason I had to return it is because I have a 2018 Ford F-250 Super Duty. They come with a 2-1/2" receiver and Ford includes a reducing adapter to get it to 2". The issue was that the lock mechanism on the Fastway does not send the lacking rods out far enough to engage BOTH the adapter sleeve and the 2-1/2 inch hitch - so the entire thing would just slide out. This was not a product flaw, I should have considered better how the locking mechanism worked before ordering. E-trailer was great with the return process, even provided a downloadable return shipping label at a reasonable cost and I got the refund to paypal the same day they received it back. I again got from etrailer their Fastway DTALBM6625-2S which is an absolute BEAST as well and looks great on the truck.
by: Good Mount07/07/2016
Overall pretty good. Adjusting the height and locking the pins isn't the smoothest, but it works just fine. If the ball is close to the key hole it makes it hard to lock the pins.
by: Ben05/19/2015
Unfortunately, the vertical portion of the receiver hangs down too far down for my application and I ended up scraping it on the concrete when backing out of a moderately sloped driveway. The manufacturer does not offer the receiver portion of the hitch as a replacement part so I had to purchase an entirely new hitch with different dimensions. It's a beautiful, sturdy hitch but you need to consider how low the vertical portion of the receiver is in relation to how steep your driveway is.
by: Jeff B05/01/2015
This is one slick ball mount. Excellent material and functionality. Looks pretty spiffy too on my wife's Grand Cherokee. We have several different trailers and it was always a hassle swapping mounts and flipping heights or drops.
Ordering and delivery were some of the easiest I have had.
Customer service follow up ( where was my package ) was awesome as well.
I am an etrailer customer for life.
by: Javier07/16/2017
I am actually buying this hitch for a second time. We had a friend that needed to use a trailer and had a hitch on his truck way to big for the trailer, extremely heavy and was so hard to take off of his truck. I lent him my hitch which came right off my truck and was easily put on his truck. He liked the hitch so much he bought it from me. So I had to turn around and buy another one.
Great product
by: Coos02/05/2018
It does not work for me. I tried it once and it is not long enough, and it now sits on the shelf in my garage. When I open my tailgate the tailgate hits the winch stand on the trailer.
by: Steve J03/24/2014
Received the hitch recently.....first impressions are that this is a well made product, very well made. Heavy as heck too....which is nice. Mounted it up and locked it in, can't wait to tow with it. Seems well designed as well, the two key holes for locking it in place and adjusting the height have good weather seals as well. Not a lot of play in the moving parts which is nice, no real slop to deal with.
by: Ronnie C.03/03/2015
This is my second DT self-locking adjustable hitch. In the five years that I have used this product there has been zero problems. If and when I trade trucks again I will buy another one. This is the best and most reliable unit on the market. Thanks e-trailer for the fast shipping and painless purchase.
by: Terry10/27/2017
The fit in my 2 inch hitch was sloppy at best and in my view unsafe. The hitch rattled and the locking pins did not extend past the holes in the hitch. In fact it appeared to me it could separate from the truck while towing a trailer. I am returning it. Seemed well built and very solid. Extremely disappointed.
by: Rich01/30/2015
This is my second adjustable hitch drop. I've had this same one in both Class 3 & 5. Both are good and very handy. It does sometimes take a little wiggle of the ball assembly as you try to turn the key to get it to lock into place. This is because you can't see if the lock pin is lined up with a hole exactly or not.
by: GuerryB11/20/2010
SatisfiedReceived helpful advice, order was taken efficiently and product arrived as promised. Probably a much nicer mount than I need, but I was 5 hours from my truck, the trailer was being built, and I was not sure how much drop would be needed. This one covers a wide range, is attractive, easy to use, and has a convenient locking feature. May or may not need the smaller ball, but like knowing it's there just in case. And it all looks good pulling a Kubota tractor on a 22' trailer.
by: Shannon01/02/2018
This is our second purchase from etrailer and it's been a very easy and pleasant transaction. Shipping was fast! The product is just as described and at very reasonable prices. We will definitely look here to purchase any future items needed.
25
501
Show More Reviews
See what our Experts say about this Fastway Trailer Hitch Ball Mount
- Recommendations for Diversi-Tech Ball Mount Impacted By HurricaneMy apologies for all you just went through and what you are now doing to regain what was lost. To attempt to work the system prior to replacement, I recommend using penetrating oil into the lock cylinder anywhere and everywhere it will fit. Then use a rubber mallet to use the vibration to work that oil into every possible place. Let it sit for a few hours and then try it. The ball platform on your Diversi-Tech hitch you will most likely need the Re-Keying Kit for DTLBM and DTALBM Series...
view full answer... - Comparing Diversi-Tech Ball Mounts # DTALBM6800 and # DTALBM6600 The two ball mounts that you referenced are basically the exact same ball mount with the exception that the # DTALBM6800 can do an 8 inch drop and a 9 inch rise and the # DTALBM6600 can do a 6 inch drop and a 7 inch rise. I would think you would be just fine with the 6 inch drop version, but that really depends on the height of the trailers you plan on towing. I attached a help article that details how to determine how much rise/drop you would need to tow a trailer level.
view full answer... - How to Determine the Drop Needed for a Ball Mount on a 2017 Ford F-250 to Pull a Husky TSWhen trying to determine what kind of Rise or Drop you will need to ensure that your towing setup is level there are 2 measurements that you will need to take; one for your hitch height and one for your coupler height. For your hitch height you will want to make sure that your 2017 Ford F-250 is sitting on level ground and then you want to measure from the bottom of the ground to the top of the receiver opening on your hitch. To determine your coupler height you will want to make sure...
view full answer...
- Recommended Adjustable Ball Mount for the Rock Tamers Mud Flap SystemI do have options but the DiversiTech now Fastway Adjustable 2-Ball Mount like part # DTALBM6600 is not offered with an extended shank. I have however attached a list of all the adjustable ball mounts we offer with an extended shank for you. Out of these, I recommend the Curt Multi-Ball Adjustable Ball Mount part # D900 which has an extra long shank that measures 15-1/4" from the center of the hitch pin hole to the center of hitch ball. This should be more than enough for you to use your...
view full answer... - How to Measure the Receiver Hitch Opening on a 2007 GMC Denali AWD for Drawbar SelectionYes, when measuring the hitch opening on your 2007 GMC Denali AWD, you will want to measure the inside dimension of the hitch opening. I have provided a link to information on measuring your hitch opening and selecting a ball mount for you to review. The Self-Locking Adjustable Aluminum Ball Mount, # DTALBM7000, with up to 11 inch rise or 10 inch drop, is designed to fit in a 2 inch receiver opening and would work on your Denali. This ball mount has a deep drop and tall rise for your...
view full answer... - Ball Mount Recommendations for Towing a Trailer with Multiple Vehicles Requiring Different DropsYou are on the right track for picking out the correct ball mount. The Self-Locking Adjustable Aluminum Ball Mount, part # DTALBM6600 is a good choice., I believe that you would be better off with the # DTALBM6400. As it could do both the 1 inch and 5 inch drop and would not be be excessively longer than you need. The # DTALBM6600 would work in that regard, but it would be a little longer than you would need so the # DTALBM6400 would be better suited for you. If ground clearance is a...
view full answer... - Fit of Adjustable Ball Mount on 2015 Chevrolet Silverado 3500The ball mount you referenced, Fastway Self-Locking Adjustable Aluminum Ball Mount # DTALBM7025, fits 2-1/2-inch hitches and its locking pins will engage with the hitch pin holes on a 2-1/2-inch receiver tube. If you have a similar ball mount made for a 2-inch hitch, such as # DTALBM6600, its pins will not extend out far enough to engage with the holes on a 2-1/2-inch receiver. You cannot use a reducer sleeve like # C45405 to use a 2-inch ball mount in a 2-1/2-inch hitch. For reference...
view full answer... - Are Locks on # DTALBM6600 Adjustable Ball Mount Keyed AlikeThe Fastway # DTALBM6600 ball mount has two locks, one to secure the ball assembly to the shank, the other to secure the ball mount into the hitch receiver. Both these locks are indeed keyed alike. If you click the provided link, you can see a product description video featuring the # DTALBM6600 Fastway Adjustable ball mount.
view full answer... - Is the 2-1/2 Inch Sleeve Removable on Diversi-Tech Adjustable Ball Mounts for 2-1/2 Inch HitchesThe reducer sleeve that comes with Diversi-Tech adjustable ball mount, # DTSTBM6625, cannot be removed from the shank. The fasteners holding it on are there for additional stability and support and the anti-rattle feature also prevents it from coming off. There are some options that might work for you though. You could use adjustable ball mount # DTALBM6600 for 2 inch hitches and the stand alone adapter sleeve, # DTADP35, when using it in a 2-1/2 inch receiver. I have included links to...
view full answer... - Replacement Lock for Diversi-Tech Ball Mount # DTALBM6600If you have not already tried a white lithium grease spray on the frozen lock on your Diversi-Tech Ball Mount # DTALBM6600 this would be a good first step. If you can remove the ball mount from the truck, that will help to allow the lubricant to do its job. Try applying the spray-in lubricant with the ball mount in one position and allow it to soak in overnight. Then reposition the ball mount and re-apply the lubricant. Again let it soak it. Repeat this process a few times with the ball...
view full answer... - Is the Self-Locking, Adjustable, Aluminum Ball Mount, # DTALBM6600, Made of Solid AluminumThe Self-Locking, Adjustable, Aluminum Ball Mount, # DTALBM6600, is indeed solid aluminum. Though some of the inner components are steel. The locking mechanism is fairly simple and secure using the barrel type keys so they will stand up to everyday use. Make sure to keep the unit maintained and properly lubricated for best performance and longest life.
view full answer... - Can 2 1/2 Fastway Adjustable 2-Ball Mount Be Used In 2 Receiver With Sleeve RemovedI wish I had better news but the sleeve you are talking about on the Fastway Self-Locking, Adjustable 2-Ball Mount w Chrome Balls - 2.5" Hitch # DTALBM6625 is not a removeable part as it is actually not a sleeve, it is part of the integrated locking system. For a comparable 2" receiver option you will need to use the Fastway Self-Locking 2-Ball Mount # DTALBM6600 which will have the same 2" and 2 5/16" hitch ball and 6" drop/7" rise as your current ball mount. I included a video of the...
view full answer... - Adjustable Ball Mount Recommendation that Can Fit 2 inch and 2-1/2 inch HitchI have a solution for you, but the reducer sleeve that comes with Fastway adjustable ball mount, # DTSTBM6625, cannot be removed from the shank. The fasteners holding it on are there for additional stability and support and the anti-rattle feature also prevents it from coming off. There are some options that might work for you though. You could use adjustable ball mount # DTALBM6600 for 2 inch hitches and the stand alone adapter sleeve, # DTADP35, when using it in a 2-1/2 inch receiver....
view full answer... - Locking Pin Diameter on Diversi-Tech Adjustable Self-Locking Aluminum Ball Mount Part # DTALBM6600 The locking pins on the Diversi-Tech Adjustable Self-Locking Aluminum Ball Mount, part # DTALBM6600 measure 5/8 or .625 inch in diameter, the same as a standard hitch pin for a Class III or higher Receiver Hitch.
view full answer... - Installation of The Curt Class III Trailer Hitch on a 2007 Acura MDX with Garnish and Spare TireThe Curt Class III Trailer Hitch, item # 13354, will not interfere with the spare tire or rear fascia on your 2007 Acura MDX. You will have to lower the spare, to install the hitch, but you will replace it when the install is complete. The Self-Locking Adjustable Aluminum Ball Mount, 2 Balls, Up to 7" Rise or 6" Drop, item # DTALBM6600, will work with the Class 3 hitch and will provide up to 7 inches rise, in one inch increments, for towing your trailer in the correct position.
view full answer... - Will Rock Tamers or Roadwing Removable Mud Flaps Fit Ball Mount, # DTALBM6600, 2002 Ford F-250I went out to the warehouse and measured the Self-Locking Adjustable Aluminum Ball Mount, # DTALBM6600, so you would be able to determine if you would be able to mount your Rock Tamers or another mud flap product. From the center of the hitch pin hole to the end of the shank (just prior to the curved portion) it measures 3-3/16 inches. You will need to measure from the center of your hitch pin hole back to the face of the trailer hitch receiver and subtract that from 3-3/16 inches. The...
view full answer...
- Are the DiversiTech Self-Locking Ball Mounts Secure and Strong Enough for TowingThe Self-Locking pins come out to about flush with the receiver tube, nothing to cut or remove for security purposes. Nothing is completely theft-proof, but this is one of the best systems I have seen. I have not heard of any in-hitch failures on any of the DiversiTech Self-Locking Ballmounts that we have sold. The pins overlap internally and are made of stainless so they are very strong and corrosion resistant.
view full answer... - Tips For Removing A Stripped Set Screw On A DTALBM6600 Ball MountIf the set screw on your # DTALBM6600 ball mount is broken, it will certainly make removing it tricky. If the screw is stripped, you may want to try using a different size allen wrench. I would take every size that I have and try larger sizes and see if you can get one to catch. It would help to spray it down with penetrating oil before you try to remove. Another thing you could try would be a left handed drill bit. You would need to use a very small bit, as the set screw is 1/20". This...
view full answer... - Is Diversi-Tech Adjustable Trailer Ball Mount, # DTALBM6600 Corrosion ResistantThe body of the Diversi-Tech Adjustable Ball Mount, # DTALBM6600, is made from aircraft-grade high-strength polished billet aluminum, which is naturally corrosion resistant and would be excellent for salt water marine applications. The integrated hitch pins are made from O-ring-sealed stainless-steel which is also corrosion resistant. The balls are chrome-plated which is not the most corrosion resistant material but they are durable when compared to zinc and aluminum balls. For the balls,...
view full answer... - How To Choose The Correct Ball Mount For Towing If you are measuring from the top of the hitch receiver tube to the ground and from the ground to the bottom of the coupler, then you will need a ball mount that offers 7" of drop. For this, I recommend using the Self-Locking, Adjustable 2-Ball Mount w Chrome Balls part # DTALBM6600. As long as you are using the method above to take your measurements and you have a 2" hitch receiver, then this ball mount will work well for you. I have also attached a help article that will help you determine...
view full answer... - Recommended Trailer Hitch and Ball Mount for 2012 Acura MDXI have a great solution for you. First for a trailer hitch, The Curt Class III Round Tube Receiver Hitch # 13354 is a great option. No drilling will be required during installation, however keep in mind that the heat shields will need to be removed and reinstalled. This 2 inch hitch opening will provide a 400 pound tongue weight capacity and 4,000 pound towing capacity, although you will also want to check the vehicle's capacities as listed in the owner's manual. I have attached an installation...
view full answer... - Are Fastway Adjustable Locking Aluminum Ball Mounts Offered in a Satin FinishAll of the Fastway adjustable locking aluminum ball mounts like # DTALBM6600 feature a bright polished finish. I confirmed this with Fastway. They advised that they use the bright polished finish to bring out a high-quality appearance for their strong weld-free one-piece ball mounts, all of which can be seen on the linked page. All of the solid aluminum locking adjustable ball mounts we offer from Rapid Hitch also feature a bright polished finish, such as their # AM3410.
view full answer... - Recommended Fastway Adjustable Aluminum Ball Mount With Stainless Steel Hitch BallsFastway actually does use stainless steel hitch balls. They offer many of their ball mounts like the # DTALBM6600 with the chrome plated steel balls, and if you prefer, the same ball mount with the same features is available with stainless steel hitch balls. That is part # DTALBM6600-2S. I called my contact at Fastway and they told me that they offer the chrome plated as a more cost-efective option.
view full answer... - Availability of Weight Safe 180 for 2 ReceiverI do have a solution, but we don't have a Weigh Safe 180 that fits a 2" receiver. Instead, I recommend the Fastway Flash Secure Adjustable 2-Ball Mount # DTALBM6600. This is incredibly similar to the Weight Safe and has a 6" drop and 7" rise with an aluminum construction. It also features built-in locks to keep it secure and is made in the USA. I have attached a review video below for your reference.
view full answer...
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
Brandon M
Expert Research:
Adam R
Expert Research:
Jeffrey L
Test Fit:
Zack K
Test Fit:
Matthew K
Test Fit:
Cole B
Test Fit:
Keith V
Video by:
Andrew K
Video by:
Patrick B
Video by:
Zach D
Video by:
Jonathan Y
Updated by:
Lindsey S
Updated by:
Shelly K
Updated by:
Amanda M
Updated by:
Mike S
Updated by:
Ryan F
Written by:
Raymond P
Video Edited:
Jacob T
Video Edited:
Kathleen M
Video Edited:
Dustin K
Video Edited:
Sue W
Video Edited:
Chris R
Installed by:
Hayden R
Installed by:
Robert C
Edited by:
Wilson B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Tony H.
5/18/2015
Good Morning Patrick I just love the hitch for several reasons. It works flawlessly to start with and I am able to adapt to almost any trailer I choose to pull. It is definitely a plus being able to move the hitch to adapt for proper levelling. I have a lot of people just stop and look at the hitch when I am in parking lots, and a time or two they have asked me where I got it. The only downside is the fact that while people see it, so does my back up alarm...