Fit of Adjustable Ball Mount on 2015 Chevrolet Silverado 3500
Question:
I just traded my 2004 Silverado 3500 for a 2015 and noticed that the receiver is a 2 1/2....my current hitch is for a 2...I have a sleeve that came with truck but pins do not slide out far enough to go through sleeve AND catch the receiver...is there an a kit I can buy or do I have to buy a new hitch ?
asked by: Earl
Expert Reply:
The ball mount you referenced, Fastway Self-Locking Adjustable Aluminum Ball Mount # DTALBM7025, fits 2-1/2-inch hitches and its locking pins will engage with the hitch pin holes on a 2-1/2-inch receiver tube. If you have a similar ball mount made for a 2-inch hitch, such as # DTALBM6600, its pins will not extend out far enough to engage with the holes on a 2-1/2-inch receiver. You cannot use a reducer sleeve like # C45405 to use a 2-inch ball mount in a 2-1/2-inch hitch.
For reference the linked page will show you all hitches offered for the 2015 Silverado 3500. You can use the drop-down menu at the top of the page to select your vehicle style to then see compatible hitches. For example, Curt hitch # C15860 fits both 6-1/2-foot-bed and 8-foot-bed versions of the 2015 Silverado 3500.
Products Referenced in This Question
Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2"
- Trailer Hitch
- Custom Fit Hitch
- Class V
- 2700 lbs TW
- 20000 lbs GTW
- 20000 lbs WD GTW
- 2-1/2 Inch Hitch
- 2700 lbs WD TW
- Visible Cross Tube
- CURT
more information >
Curt Hitch Receiver Reducer Sleeve - 2-1/2" to 2"
- Hitch Adapters
- Hitch Reducer
- Bike Racks
- Cargo Carriers
- Hitch Mounted Accessories
- No Extension
- Fits 2-1/2 Inch Hitch
- 2-1/2 Inch to 2 Inch
- CURT
more information >
Product Page this Question was Asked From
Self-Locking, Adjustable 2-Ball Mount w Chrome Balls - 2.5" Hitch - 10" Drop/11" Rise
- Trailer Hitch Ball Mount
- Adjustable Ball Mount
- 2 Inch Ball
- 2-5/16 Inch Ball
- Two Balls
- Steel Ball
- Aluminum Shank - Silver
- Drop - 10 Inch
- Rise - 11 Inch
- Fits 2-1/2 Inch Hitch
- 10000 lbs GTW
- Class V
- Built-In Locks
- Fastway
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Will Rock Tamer Mudflap Fit With Curt Adjustable Ball Mount # C45900
- Q&A: Choosing Between Air Lift Load Lifter 5000 or 7500 For 2018 Ram 2500 Towing 5th Wheel
- Q&A: Overall Height of the 180 Hitch 2-Ball Mount w/ Stainless Balls # LTB10-25
- Q&A: Weight of Fastway DTSTBM7025 Solid-Tow Adjustable Ball Mount
- Q&A: Fuse Location for 12-Volt Accessory Feed to 7-Way Trailer Connector on 2005 Chevy Silverado
- Q&A: How to Determine Correct Ball Mount Rise or Drop for Towing a Trailer with a 17 Inch Coupler Height
- Q&A: Best Way to Get Longer Safety Chains on a Trailer
- Article: Hitch Mounted Cargo Carrier Information
- Article: Trailer Wiring Diagrams
- Article: Brake Controller Installation for 2007 (New Body Style) - 2013 GMC Sierra and Chevy Silverado
- Article: Installing an Electric Brake Controller on 2007-2013 GM Full-Size Truck or 2007-Present GM SUV
- Article: Steel vs. Aluminum Ball Mounts
- Article: Trailer Tire Sizing