bing tracking image
  1. Trailer Hitch Ball Mount
  2. Fastway
  3. Fits 2 Inch Hitch
  4. Adjustable Ball Mount
  5. Drop - 8 Inch
  6. Rise - 9 Inch
Flash Simple 2-Ball Mount w Chrome Balls - 2" Hitch - 8" Drop, 9" Rise

Flash Simple 2-Ball Mount w Chrome Balls - 2" Hitch - 8" Drop, 9" Rise

Our Price: $240.00
Trailer Hitch Ball Mount
Shipping Weight: 18 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Switch easily between trailers with this adjustable, solid aluminum ball mount. Go from a 8" drop to a 9" rise. Tow up to 8,000 lbs with the 2" ball and up to 10,000 lbs with the 2-5/16" ball. Hitch pin and clip sold separately. Great Prices for the best trailer hitch ball mount from Fastway. Flash Simple 2-Ball Mount w Chrome Balls - 2" Hitch - 8" Drop, 9" Rise part number FA42-00-2800 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (637)
  • Q & A (0)
  • Photos

Fastway Trailer Hitch Ball Mount

  • Fits 2 Inch Hitch
  • Adjustable Ball Mount
  • Drop - 8 Inch
  • Rise - 9 Inch
  • 2 Inch Ball
  • 2-5/16 Inch Ball
  • Two Balls
  • 10000 lbs GTW
  • Class IV
  • Fastway
  • Aluminum Shank - Silver
  • Steel Ball

Switch easily between trailers with this adjustable, solid aluminum ball mount. Go from a 8" drop to a 9" rise. Tow up to 8,000 lbs with the 2" ball and up to 10,000 lbs with the 2-5/16" ball. Hitch pin and clip sold separately.


Features:

  • Adjustable ball mount makes it easy for you to haul different trailers
    • Ball height adjusts in increments of 1" so that you can easily switch between trailers with different tongue heights
    • Reversible ball platform lets you swap between 2 different-size balls
  • Machined, aircraft-grade billet aluminum construction is corrosion resistant
    • Solid aluminum produces a lightweight yet strong ball mount
      • Avoids welds, which can cause weak points that might break
    • Polished finish creates a high-quality appearance
  • 2 Chrome-plated steel hitch balls included
  • Hitch pin and clip or hitch lock sold separately
  • Made in the USA


Specs:

  • Application: 2" x 2" trailer hitch receivers
  • Ball diameters: 2" and 2-5/16"
  • Towing capacity:
    • 2" Ball: 8,000 lbs
    • 2-5/16" Ball: 10,000 lbs
  • Tongue weight: 1,000 lbs
  • Maximum rise: 9" from the top of the hitch receiver opening
  • Maximum drop: 8" from the top of the hitch receiver opening
  • Distance from center of hitch pin hole to back of upright bar: 4-1/4"
  • Distance from center of hitch pin hole to center of ball: 8-1/2"
  • 1-Year limited warranty


E Series Dims

The Fastway Flash Series ball mount is strong, durable, and easy on the eyes, making it the best of both worlds. It's solid, aircraft-grade aluminum construction is durable, rust resistant, and sturdy enough to last for years to come. With a polished mirror finish, this ball mount will make any vehicle look fantastic.


The adjustable ball height lets you tow a variety of trailers with different tongue heights. Having both a 2" ball and a 2-5/16" ball allows for even more versatility, making this the ultimate go-to ball mount if you own multiple trailers.


Changing Ball Height and Replacing Balls

To adjust the height of the ball, remove the pin so that you are able to slide the ball platform up or down along the shank to the desired position. Re-insert the pin once you have found the correct height and replace the clip.


Switching the hitch ball is just as easy. Simply remove the pin holding the ball platform in place and slide the platform off of the shank. Flip the platform upside down so that the ball you want to use is on top. Then slide the ball platform back onto the shank and replace the pin.


How to Measure Drop on Adjustable Ball Mount


42-00-2800 Flash 8" Simple 2" Shank 2" and 2-5/16" Chromed Balls

Item # FA42-00-2800





Customer Satisfaction Score:


Customer Reviews

Flash Simple 2-Ball Mount w Chrome Balls - 2" Hitch - 8" Drop, 9" Rise - FA42-00-2800

Average Customer Rating:  4.8 out of 5 stars   (636 Customer Reviews)

Switch easily between trailers with this adjustable, solid aluminum ball mount. Go from a 8" drop to a 9" rise. Tow up to 8,000 lbs with the 2" ball and up to 10,000 lbs with the 2-5/16" ball. Hitch pin and clip sold separately.

by:

It’s a great product and performed as I needed it. I need the two inch ball and the 2 1/4 in ball scraped the street as I was backing out. There should be a way to take the ball you don’t use off!



by:

Nice looking and very well made. I will be hauling a 24’ enclosed trailer with combine weight of 6000 pounds. I am replacing a one piece steel unit that was showing signs of bending. This should be safer.



by:

The hitch is great I love how easy it is to adjust height as well as no having to remove pin to remove or adjust height also hitch still looks great after a really hot Phoenix Arizona summer



by:

I bought a new truck and needed a receiver for the truck. I am really pleased with the hitch I bought. It looks good on the truck and pulls my stock trailer like a champ. I love the fact that it is adjustable because it fits all 4 of my trailers heights with quick and easy adjustment. This is a great looking and working product.

Jack A.

6/13/2018

What a great product. Works on all my trailers. Adjusts quickly, and handles all the weight that I have put on it. Still works and looks great. Have had many compliments on my hitch.



by:

very good quality. with the different holes, I can now pick the right one to pull my cargo trailer level.



by:

Great looking and strong. I almost hate to hook a trailer to the flawless finish. Only issue is that when the ball is mounted on the front of the drop to get it out of the way when not towing it will only fit into the bottom pin hole which leaves the ball significantly lower than the drop mount. Should have been able to fit into the second from bottom hole to protect the ball and give more ground clearance



by:

Very pleased with adjustable hitch and service! It was reasonably priced with free shipping. The hitch allowed me to properly adjust height and travel level with my trailer. I plan to be a repeat costumer.



by:

First, I'm very pleased with the level of customer service from etrailer.com. Site is easy to navigate, ordering was simple, and the item was shipped on time.

The hitch itself is a thing of beauty. Well-designed, solid, bright and shiny. I put it on my truck to see if it fits as expected, which it does. I haven't attached my trailer yet, but I can see that it will work as advertised.



by:

Was easy to order and delivered third day. Great looking and light to carry compared to steel hitches. Great purchase at a fair price.



by:

Excellent quality hitch which provides the rise that I need to level my trailer while towing. It is also a great looking piece of gear!



by:

Very solid construction. i was afraid it would rattle but it doesn't . Easy to change ball size and height for my different trailers



by:

Easily adjusts for different trailer he ights.



by:

Haven't used it yet (just got it yesterday), but it looks great! Shipping came when promised, good communication from etrailer, thank you very much!



by:

Looks great and well made, looking forward to using it with my trailer.



by:

looks great and works great a nice addition to my 1993 Dodge Dually

Charlie B.

6/21/2019

great still looks like new



by:

perfect looks great on my 2017 jeep wrangler Rubicon recon thanks



by:

Great product, It has served me well.

Mike D.

4/14/2018

Great product, I use it regularly and its held up great.



by:

Great product...

Rick P.

2/14/2021

Excellent in all areas. Great product!



by:

Amazing product. Have used a dozen or so times and it continues to amaze. I even have people come up to me compliment it and get information. Also, customer service is 2nd to none. Thank you.



by:

This worked perfectly with my 6" lifted Nissan Titan. Overly built but with peace in mind when towing your toys.



by:

This hitch was purchased as a birthday gift for our son-in-law. It arrived in a timely manner. Our son-in-law was pleased and very impressed with the quality.



by:

It is beefy enough to do the job we got it for. There is no problems with it.



by:

Great used all year long no problems.



by:

Looks amazing,it says American made that always makes me proud, probably the nicest I've seen....thx for fast shipping



by:

Great, and priced right. Made some money on the resale.


25
635
Show More Reviews

See what our Experts say about this Fastway Trailer Hitch Ball Mount

  • 2014 Cadillac Escalade Adjustable Ball Mount Recommendation
    Your 2014 Cadillac Escalade would most likely not have a 2-1/2 inch hitch installed on it, but if it did the part # FA42-00-2825 would work. Most likely you have a 2 inch hitch installed though and would need the # FA42-00-2800 which is the same thing but for the 2 inch hitch size. The larger hitch size is normally only seen on heavy duty trucks.
    view full answer...
  • Recommended Rise For 2008 Nissan Frontier Ball Mount
    The Flash E Series Adjustable part # FA42-00-2800 will work well for your 2008 Nissan Frontier hitch that is 17.5" from the top of the receiver to the ground and the trailer that has a coupler 24 inches from the ground when level. You do need about 6.5" of rise to be level, you can pin the ball in the second to last hole from the top.
    view full answer...
  • Locking Pin Recommendation for the Flash E Series Adjustable, Steel Ball Mount FA42-00-2800
    As long as the pin diameter matches up on your Adjustable Ball Mount part # FA42-00-2800 with the part # C23556 the locks being a bit too long would not matter. Normally we would recommend the part # AM3493, but if the Curt fits it would work as well.
    view full answer...
  • Availability of an Adjustable Ball Mount with a 10k Capacity
    We have a ton of adjustable ball mounts with a 10k capacity, but none of them have the sway control tab like the # 7390 has. I attached a link to a page that has all of them listed. For a very similar one check out the Flash E Series Adjustable 2-Ball Mount w Chrome Balls # FA42-00-2800. I attached a review video for you to check out as well.
    view full answer...
  • Trailer Hitch, Wiring Harness and Weight Distribution for 2000 Ford Excursion
    So it sounds like you need a full set up for towing with your 2000 Ford Excursion, which includes a trailer hitch, wiring harness, adjustable ball mount and weight distribution system, as I assume you do not have the factory tow package. We have all of that for you, and I'll list the parts you need. - Curt Trailer Hitch Receiver # C14011 - T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118344 - Rapid Hitch Adjustable Steel Ball Mount # AM3461 (Maximum 4" rise or drop)...
    view full answer...
  • Differences Between Fastway E Series and Self Locking Adjustable Aluminum Ball Mount
    The Fastway E-Series # FA42-00-2800 and the # DT-ALBM6800-3S self locking ball mount have the same 10K capacity (which depends on the ball used) and the same 8 inch drop or 9 inch rise. The self locking ball mount has a built in lock that secures the ball mount in the receiver hitch. There's an additional lock that secures the ball and the ball platform to the ballmount, preventing either from being removed without the key. The self locking ball mount includes all three trailer ball sizes,...
    view full answer...
  • Can Fastway Flash E Series Adjustable Ball Mount be Used with Sway Control Device
    I do have a solution for you, however, as you referenced in your question, an adjustable ball mount like the Fastway Flash E Series # FA42-00-2800 will not be able to accept a sway control kit such as the Reese # 83660. This ball mount does not have a platform for the sway control bar to attach to and using a bracket like # RP26003 will not work because the hitch ball cannot be removed. If you are needing an adjustable ball mount that you can use with a sway control bar, I recommend looking...
    view full answer...
  • Fastway Flash E Series Adjustable 2-Ball Mount for 2-Inch Hitch
    The Flash E Series HD 18K Adjustable 2-Ball Mount # FA42-00-2825 is intended for a 2-1/2-inch hitch but we do have similar adjustable ball mounts that will fit the 2-inch hitch on your 2017 Chevrolet Colorado. Do note that these will not have the same 18K weight rating since they are for use in lower capacity 2-inch hitches. Fastway Flash E Series Adjustable 2-Ball Mount # FA42-00-2800 fits a 2-inch hitch, has the same rise/drop, 2 sizes of hitch ball and a 10K rating. This and all other...
    view full answer...
  • Measurement of Center of Hitch Pin Hole to Center of Ball on Flash E Ball Mount # FA42-00-2800
    On the Flash E Series Adjustable 2-Ball Mount w Chrome Balls - 2" Hitch - 8" Drop, 9" Rise # FA42-00-2800, the measurement from the center of the hitch pin hole to the center of the ball is 8-1/2 inches. I am including a picture that will show the measurement. I also recommend the etrailer Trailer Hitch Receiver Lock for 2 Inch Trailer Hitches, part # e98880.
    view full answer...
    Image 1 for
  • What is the Rise of Convert-A-Ball Ball Mount # AMSC10
    Because there isn't an 8-3/4 inch rise category for ball mounts the Convert-A-Ball mount # AMSC10 is lumped into the 9 inch rise category. The actual rise is 8-3/4 inches. In the grand scheme of things that 1/4 inch difference isn't going to cause you any problems and the trailer will be more level than most other setups I have seen. If exactly 9 inches is required your best option is adjustable ball mount # FA42-00-2800 which has a maximum rise of 9 inches. I have linked a video review...
    view full answer...
  • How Low Would the Bottom Ball of FA42-00-2800 Hang If Adjusted All the Way Down
    From the top of the shank to the bottom ball on adjustable ball mount # FA42-00-2800 in it's lowest position is approximately 13 inches.
    view full answer...
  • Adjustable Ball Mount Recommendation for 2017 Ford F-350
    It sounds like from your history on our site that you're looking for an adjustable ball mount for your 2017 Ford F-350. Of the three ball mounts you looked at, parts # MD206, # FA49-00-5625,and # FA42-00-2825 I like the Fastway # FA42-00-2825 because it has a slightly higher amount of travel in the rise and drop but more importantly is completely aluminum causing it to be lighter and resistant to corrosion. The # FA42-00-2825 fits a 2-1/2 inch receiver so if your truck has 2 inch then...
    view full answer...
  • Aluminum Adjustable Ball Mount Recommendation that has 1-7/8 inch and 2 inch Hitch Ball
    To get an aluminum adjustable ball mount that can have a 1-7/8 inch ball on it you would need to replace the balls of the # FA42-00-2800 with the part # DTBM23 and then you would have a 1-7/8 inch ball and a 2 inch ball. There isn't a version of the 180 ball mounts that has both sizes you wanted.
    view full answer...
  • Availability of Adjustable Two Ball Mount and Lock Set
    We carry the lock set part number # AM3493. We also carry the EZ Ball Mount Set part # AM3298 which I believe is the ball mount you are looking for. It has the same rise/drop and capacity for the part number 3299.
    view full answer...
  • Recommended Ball Mount for a 2016 Ram 1500
    In order to find the correct ball mount for your 2016 Ram 1500 you are going to need to measure from the ground to the top of the inside edge on your truck's trailer hitch receiver tube opening and then compare that to the distance from the ground to the bottom of the coupler on your trailer while level. The difference between these two measurements will give you the correct amount of rise/drop you need to look for in a ball mount which I have attached a list of for you. With that being...
    view full answer...
  • Measurement of Center of Hitch Pin Hole to Vertical Upright on E Series Ball Mount # FA42-00-2800
    On the Flash E Series Adjustable 2-Ball Mount w Chrome Balls - 2" Hitch - Item # FA42-00-2800, the measurement from the center of the ball mount hole to the closest edge of the vertical upright is 4-1/4 inches. The distance from the closest edge of the 2-5/16 inch ball to the vertical upright is 1-7/8 inches. I am including a picture that will include the measurements listed above.
    view full answer...
  • Compatibility of a Hitch for a 1972 Chevrolet K Series Truck
    The Curt # C15511 hitch is the confirmed fit for a 1972 Chevrolet K Series truck if you have the 8 foot bed and the deep drop rear bumper. The measurement from the top of the tube to the mounting flange is 8-1/32 inches. The extended length was to make sure the hitch would clear the bumper. If you have the standard bumper, then the Curt Hitch # C14082 is the confirmed fit. If # C15511 can be installed on the standard bumper model, then there will be a large gap between the bumper and...
    view full answer...
    Image 1 for
  • How Much Does the Channel Style Adjustable Ballmount Part # C45900 Weigh
    The Channel Style Adjustable Ballmount part # C45900 that you referenced weighs around 30 lbs. If you need something lighter then you may want to take a look at some of our adjustable aluminum ball mounts like the Flash E Series Adjustable 2-Ball Mount part # FA42-00-2800 which I have attached a list of for you.
    view full answer...
  • Anti-Rattle Device Recommendation for Use with Fastway Flash E-Series Ball Mount
    Since the Flash E Series Ball Mounts # FA42-00-2800 have aluminum, solid shanks you would have to use an Immbolizer like part # BX88224 to get rid of the movement. I attached a review video for this anti-rattle device as well.
    view full answer...
  • Why Does the Flash E Series Adjustable Ball Mount Rattle While Driving
    The hitch balls on the Flash E Series Adjustable Ball Mount, # FA42-00-2800, will rattle somewhat in the ball mount when not towing. The rattle is due to the shank of the hitch ball being narrower than the mounting slot on the shank of the ball mount. While towing the rattle will be minimal because the weight on the hitch ball will push the hitch ball shank into the slot on the ball mount. If the rattle you are experiencing is at your trailer hitch receiver, then that can be easily remedied...
    view full answer...
  • Compatiblility of Flash E Series Adjustable 2-Ball Mount with 2003 Hummer H2
    The Flash E Series Adjustable 2-Ball Mount, part # FA42-00-2800 will work just fine with a 2x2 inch Class III receiver on your Hummer H2. The Ball Mount has a 8000 lb capacity when used with the 2 inch ball, or 10,000 lbs when used with the 2-5/16 ball, although your maximum capacity will be limited by the manufacturers stated towing capacity.
    view full answer...
  • Recommended Hitch Lock and Ball Mount Compatible with 3 Inch Hitch with Reducer Sleeve
    The Flash E Series Adjustable 2-Ball Mount w Chrome Balls # FA42-00-2800 has a 5/8 inch pin hole diameter. I believe you will be able to use the Fastway Trailer Hitch Lock and Adjustment Pin Lock Set for Flash E Series Ball Mounts # FA86-00-3660 for a locking combination. The hitch lock is 3-5/8 inches from inside to inside so as long as your 3 inch receiver is under that 3-5/8 at the outer edges you will be fine. You can alternatively use the Draw-Tite Trailer Hitch Lock - 3" Hitch...
    view full answer...
  • Choosing a Ball Mount for a 2015 GMC Acadia Denali with Factory Tow Package
    I have a coworker with a 2015 GMC Acadia that has the tow package as well so I went out to check it out. The hitch on the vehicle does have safety chain loops on each side of the receiver so you would not have to have a ball mount that has safety chain loops. The ball mount you use will depend on how much rise or drop you will need to tow the trailer level. To determine that there are a couple of measurements needed. First measure from the ground to the top of the receiver opening on...
    view full answer...
  • Parts Needed to Move Trailer leaf Springs to Top of Axle on a Zinger ZT19RD Travel Trailer
    To lift your trailer leaf springs from the bottom of your axle to the top of your axle to provide lift for the suspension you will need 4 new spring seats, 8 u-bolts, 16 nuts and 4 U-Bolt plates, see links. This is assuming that your trailer suspension is in good condition otherwise. The diameter of your trailer axles will determine the size of these parts that you will need to order. If your axles are 3 inches diameter, the kit you referenced, # K71-385-00, would be a great choice. I...
    view full answer...
    Image 1 for


< Previous
12



Do you have a question about this Trailer Hitch Ball Mount?


Info for this part was:

Employee Andrew K
Video by:
Andrew K
Employee Chris R
Video by:
Chris R
Employee Jonathan Y
Video by:
Jonathan Y
Employee Lindsey S
Edited by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee Robert C
Installed by:
Robert C
Employee Adam E
Installed by:
Adam E
Employee Jameson C
Expert Research:
Jameson C
Employee Joshua S
Video Edited:
Joshua S
Employee John S
Video Edited:
John S
Employee Shelly K
Updated by:
Shelly K
Employee Wilson B
Updated by:
Wilson B
Employee Mike S
Updated by:
Mike S
Employee Ryan F
Updated by:
Ryan F
Employee Amanda M
Written by:
Amanda M

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.