Summer Starts Here - Save up to 70%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Corrosion-resistant ball mount is 9-9/16" long and fits 1-1/4" x 1-1/4" trailer hitch receivers. Ball mount can be used in the rise position only.
Features:
Specs:
Average Customer Rating: 4.8 out of 5 stars (1998 Customer Reviews)
Corrosion-resistant ball mount is 9-9/16" long and fits 1-1/4" x 1-1/4" trailer hitch receivers. Ball mount can be used in the rise position only.
For Mazda CX-3 owners, this is the drawbar you need to achieve the correct final hitchball height for small U-Haul cargo or motorcycle trailers. You know the receiver sits quite low so this gets the height just where it needs to be, especially when the trailer is properly weighted/loaded.
Shipped in quicker than I thought it would. It fit it my old Hidden Hitch Class I receiver perfectly. I drive a '97 Geo Prizm, and the 5 inch rise is a definite plus in keeping my 5 x 8 utility trailer nice and level when I'm hauling lawn equipment. The only drawback is that the Curt drawbar does not come with the pin.
Worked perfectly with the Curt towing hitch for my 2016 Scion tC (stock height).
Exactly as described. Quality part.
I'm very pleased with your product and customers services, those product fit in my car like the instruction said, thank you Etrailer I recommend 100%
It's Prefect!
Very fast shipping fits my 2013 Corolla S perfect perfect height nice gap in between hitch and bumper
This is an addition to my hitch. Had to use the original part for a platform for my scooter, before I bought the trailer.
Highest quality ive seen....perfect fit I can use it on my harley and my SUV... When my wife returns from Afghanistan in May...we will travel across the S.E. USA on the Harley Trike and trailer thanks to Curt product.
Were the shank a half inch longer and the pin hole moved to match, this would have fit my car perfectly. As it was, I needed to cut my bumper to install it.
It's just what I needed, gave me the height i was looking for.
Steve F.
1/6/2018
Still very happy with it! Works perfect on my Fiesta ST.
This is the perfect 1.25 hitch slider for a passenger car. You need at least 18" to the ball for a trailer (etc) to set level. Passenger cars sit lower and softer suspension. This is the only place you can find a 5" rise in a slider. E-trailer has it all including the trailer wiring adapter which fit perfect. My 2016 Chevy Impala never had is it so good...Thanks for great products.
Jon J.
6/29/2017
One Year later and still perfect!
Recently I ordered the Curt C45014 Curt Class II Drawbar - 5" Rise - 9-5/8" Long rated for 3,500 lbs. However, I ordered this C45024 by accident and it is rated for only 2000 pound. However, they are exactlly the same. Only thing I can tell different is that the C45014 is rated for rise only, and the sticker on the C45024 is rated for rise or drop. This is solid square bar stock and the flat bar for the ball mount is the same thickness. Since they are the same I would not be afraid to pull 3500 lbs or more with either one. Only a few dollars difference. Either one is excellent since they appear to be exact.
Gary P.
5/17/2014
I have found Curt products are of the highest quality. If possible I always buy Curt products. I think Curt under rates their products and over engineer all products. Therefore, Curt products are heavy duty without failure.
Well-made draw bar by Curt. Other brands I shopped locally were sloppily constructed. My existing draw bar was bent in a rear-end accident earlier in the week. This is an exact replacement. etrailer.com folks were fast in getting this one to my door. I am a return customer and know I can always depend on etrailer.com!
Heather A.
1/27/2018
Rich,Thank you for your review.I am sorry to hear about your accident. It is not recommended that a trailer hitch be used again if the part of the car that the hitch was installed on was involved in the accident in any way. There can be stress cracks in the welds that may not be visible, and that would compromise the stability and safety of the hitch.
Rich P.
12/26/2018
Ball mount continues to serve me very well. eTrailer.com never disappoints! Happy holidays!
Not tested yet, but was happy to find a hitch that would help me tow my new trailer at the proper height. Didn't even know such a thing existed until I saw them on this site.
Deidre
1/19/2018
Very nice seat covers, would buy again. Appreciate how well-made they are.
Received item as advertised in a timely manner. Will certainly do business again as needed in the future. Will certainly recommend.
I ordered the Curt hitch and ball mount for my 2011 VW Golf TDI. The product arrived sooner than advertised and the video and printed instructions were complete. As other customers have noted, the hitch is low and care should be exercised. My only suggestion would be to include Posilock T connectors as they provide a superior connection over the suggested sissor connector. Check out Posilock's website, I think that you will agree that they are a quality item in keeping with your company's well deserved reputation.
Excellent service!! Quick shipping and product is as described. :)
Good product, well made. However one needs to make or buy a Trailer Hitch Anti-Rattle / tightener.
Rachael H.
7/23/2019
I recommend the Roadmaster Quiet HItch # RM-061-125 for an anti-rattle device for your ball mount.
Helpful Links
Would have been great if there was something inside of the carton, nothing but wrapping paper.Big hole on side of carton
Was everything they said it would be.installing it diy was even easier than I thought it would be. now i've got to pull my poor overloaded trailer out from behind the garage and see what else I need to order next ..sigh ..anyways if I need something else I will use etrailer for my next purchase. thanks guys for making life just a little bit easier...the drawbar was my second purchase my 1st was the tow hitch for the ford fusion...
I purchased a new 2016 Ford Focus and wanted a trailer hitch to carry my bicycle and also to pull a small trailer. I installed a Curt 11158, class 1 trailer hitch (perfect fit & no installation problems). The Curt C45024 drawbar was a perfect match for the car. See picture. Very happy & worth 5 stars.
I needed a drawbar that would make my boat trailer track safely by being as level as possible. Etrailer provided me with very helpful information which led me to ordering their drawbar. It has yet to be installed with a hitch that I am buying locally. I expect all to go well.
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Brian J.
10/5/2021
I drilled it out for a 1 post and repeatedly hauled far more than the 2000lbs my car is rated for, even at highway speeds in through city traffic. I dont see this failing anytime soon.