Tekonsha Primus IQ Trailer Brake Controller - 1 to 3 Axles - Proportional
(2065 reviews)
Price: $111.01
Tekonsha Primus IQ Trailer Brake Controller - 1 to 3 Axles - Proportional
Retail:$164.88
Our Price: $111.01
You Save: $53.87
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
In-stock alternatives that can ship today
- All Info
- Reviews (2065)
- Q & A (0)
- Photos
Tekonsha Trailer Brake Controller
- Electric
- Proportional Controller
- Up to 3 Axles
- Tekonsha
- LED Display
- Dash Mount
- Under-Dash Box
- Automatic Leveling
- Up to 90 Degrees
This proportional brake controller has simple controls and a digital display for diagnostic information. Includes 3 boost levels, a slide-bar manual override, built-in battery protection, automatic leveling, and continuous diagnostics.
Features:
- Brake controller activates trailer brakes in proportion to your vehicle's braking action
- Automatically adjusts trailer's braking based on deceleration of tow vehicle
- Straight-forward controls keep settings within easy reach
- Gain setting lets you adjust the amount of power sent to the trailer's brakes
- 3 Boost levels let you adjust initial braking power and aggressiveness
- Slide-bar manual override allows you to control trailer sway or stop in emergencies
- LED display shows your current settings and diagnostic information
- Built-in safeguards protect your vehicle, trailer, and the controller
- Runs continuous diagnostic checks to alert you to any potential problems
- Minimizes drain on car battery when not in use
- Prevents trailer brakes from overheating by reducing power output to them during prolonged stops
- Quick-disconnect feature lets you easily remove and store the controller when not in use
- Replacement wiring harness (sold separately) and replacement bracket (6927 - sold separately) required to swap controller between vehicles
- Easy installation with automatic leveling
- Position anywhere from -90 degrees to 90 degrees up and down
- Controller must be parallel with direction of travel and horizontally level
- Included harness hardwires to vehicle and plugs into controller
- Plug-in, vehicle-specific adapter (sold separately) available for select vehicles to reduce installation time
- Mounting bracket and hardware included
Specs:
- Application: trailers with up to 3 axles (6 brake assemblies)
- Compatible with electric brakes only
- Dimensions: 5" long x 4-3/8" wide x 2-1/2" tall
- Mounting range: between -90 degrees and 90 degrees vertically
- Limited lifetime warranty
Gain Power Adjustment
You can adjust the gain (also known as output) with the thumbwheel on the front of the controller. Gain lets you set the maximum amount of power that will be applied to your trailer's brakes. A heavier trailer will need more power to achieve smooth, safe braking, while a lighter trailer will need less. Typically, the gain is only readjusted when you experience changing road conditions or if the weight of your trailer changes.
Power Boost for Heavy-Duty Towing
The boost setting controls the aggressiveness of your trailer's braking, meaning how quickly the brakes reach the maximum braking level. You can adjust this when you're towing heavy loads and you need more umph to bring your trailer to a stop. Your tow vehicle doesn't need that much power to brake in time, but your heavy trailer does.
Depending on the level of boost, your trailer brakes can start at either 13 percent or 25 percent of the set gain. What this means is that, instead of starting at 0, the brakes will start at 25 percent and get to 100 percent sooner. This keeps the trailer from pushing your tow vehicle forward.
If your trailer weighs less than your tow vehicle, no boost is needed. But, if you want your trailer to lead the braking, you can select level B1.
Boost Levels:
| Approximate Gross Trailer Weight | Boost Level | Increase in Initial Power Output |
|---|---|---|
| Less than tow vehicle GVW | B1 | 13% |
| Equal to tow vehicle GVW | B1 or B2 | 13% or 25% |
| Up to 25% more than tow vehicle GVW | B2 or B3* | 25% |
| Up to 40% more than tow vehicle GVW | B3* | 25% |
*Both B2 and B3 offer a 25-percent boost in initial power. But the braking curve for B3 is more aggressive than that of B2. This means that, even though you will start out with the same intensity when using these boost levels, you will get an overall more aggressive braking experience with the higher level. So if you use B3, you will reach maximum braking sooner than if you use B2.
To adjust the boost, use the blue push-button on the top of the Primus IQ.
Slide-Bar Manual Override
The Tekonsha Primus IQ comes with an easy-to-reach, slide-bar manual override, great for stopping sway or controlling your trailer's momentum in emergencies. To engage the manual override, just push the slide-bar to the left, towards the center of the controller. This will activate the trailer's brakes and brake lights without you having to apply the brakes on your tow vehicle, perfect for limiting trailer movement while you're cruising.
Quick, Simple Installation
The Primus IQ can mount between -90 degrees and 90 degrees vertically, but the brake controller still needs to be horizontally level and parallel with the direction of travel.
After mounting the Primus IQ unit in your cab using the included bracket, hardwire one end of the included pigtail harness directly into your vehicle. The other end plugs into the brake controller. To remove the IQ for storage when you're not using it, just unplug the unit and slide it out of the bracket. With a replacement wiring harness (sold separately) and replacement bracket (6927 - sold separately), you can even transfer the IQ to another vehicle.
Installation Accessories
See etrailer.com's exclusive 7- and 4-way brake-control installation kit (ETBC7 - sold separately) if you don't already have a 7-way plug at the back of your vehicle
Note: If a custom brake control wiring adapter is not available for your vehicle, one of the following will be required:
- 20-Amp circuit breaker (9506P - sold separately) for 2- to 4-brake applications
- 30-Amp circuit breaker (38630 - sold separately) for 6- to 8-brake applications
Proportional Braking
The Tekonsha Primus IQ brake controller comes equipped with proportional braking to give you the best towing experience. Proportional braking means that your trailer brakes mimic your tow vehicle's brakes. If you slam on the brakes in your vehicle, your trailer brakes will activate with the same intensity; if you brake lightly, your trailer brakes lightly too. The trailer's braking is in proportion to your vehicle's braking. This saves wear and tear on the tires and the brakes on both your vehicle and trailer.
The Primus IQ uses an internal inertia sensor to detect how your vehicle is braking so it can send the right amount of braking power to your trailer. It measures the inertia of your tow vehicle and activates the trailer's brakes to slow at the same rate. The result is uniform braking across your towing setup. No push-pull action - just smooth, proportional braking every time.
90160 Tekonsha Primus I-Q Proportional Brake Controller - 1 to 4 Axles
39528 Hidden Hitch Proportional Brake Control
20191 Draw-Tite I-Stop IQ Proportional Brake Control
Item # TK90160
Installation Details
California residents: click here
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not arrive in time
Customer Reviews
Tekonsha Primus IQ Trailer Brake Controller - 1 to 3 Axles - Proportional - TK90160
Average Customer Rating: 4.8 out of 5 stars (2065 Customer Reviews)
This proportional brake controller has simple controls and a digital display for diagnostic information. Includes 3 boost levels, a slide-bar manual override, built-in battery protection, automatic leveling, and continuous diagnostics.by: J06/19/2013
THANKS for the Brake Controller unit from ETrailer. It arrived w/in 5 days from your MO location to my So CAL residence.
Even as an Engineer/Scientist from the Delta IV rocket program and no experience with brake controllers, I was able to install this unit by myself. Your continued (live human) support and online video clips proved to be the key elements to this installation...without my symbolic pocket protector.
I have attached a few images of the unit, mounted to the fuse-panel cover (3/16 attachments with locking hex nuts) in a 2006 Toyota 4Runner SR5 (with factory tow package). The placement of the unit onto the panel cover allows a new panel cover (no holes drilled) to be used when it is time to sell the vehicle.
by: Steve M12/27/2016
Product was delivered on time. Installation vehicle was a 2012 Ford Expedition Limited with factory tow package and was a breeze. I purchased the pre-wired pigtail which fit the Ford connector with no problem. I used the snap-in plastic bracket, mounted on the knee panel as close as possible to the center console. I held the bracket in place using painters tape to check the mounting position before driving in the self tapping screws. Start to finish was less than 10 minutes. I pull a 29' tandem axel travel trailer which comes in around 7,000 lbs and so far, stopping has been smooth and even with no jerking.
Steve M.
12/27/2017
After a year of use I am very impressed with this controller. Previous controllers I have used tend to be too aggressive on applying the trailer brakes, especially in stop and go driving, but not this unit, it is very smooth. However, when needed, as in one emergency stop last year it pulled us up quickly and straight. I would certainly recommend this product.
by: V Johnson10/02/2015
I have installed the Tekonsha Primus IQ Brake Controller with the ETBC7 Brake Controller wiring kit on my 1990 Chevy Blazer Scottsdale. Everything that I needed was included and the installation instructions were simple. We will be trying it out for the first time in early November when we are going to rent a small travel trailer. If we like the experience we may buy a travel trailer to go with our brake controller! Before and after pictures attached. Thanks for the quick service and support.
V J.
10/2/2016
Brakes work perfectly. Our rental trailer worked out great for an 800 mile round trip and 4 nights at a Florida State Park. We bought a used 20 travel trailer in February and have taken it on two short trips and a month long vacation. We have had no problems at all and now have almost 3000 miles of towing behind us. One emergency stop was exciting, but the rig stayed perfectly straight and probably stopped shorter than the Blazer would have done without the 4 extra brakes behind it. Thanks for all of your help and support.
by: Linus01/30/2014
Pictures of the install. Approximately a 20 min job. First picture my finger is pointing to the factory plug with the etrailer supplied harness plugged in. Note the harness did not specify that the white common with the ring terminal should be connected to ground. But then again that SHOULD be obvious. I will be towing this weekend so I will rate the product then. One minor gripe is that there is always power to the unit which is a battery drain (as evidenced with the key out of the ignition and the unit stayed on) Not sure as to the impact but the controller can always be unplugged or removed.
Sorry for the dirty floor mats in the photos.
Patrick B.
1/30/2014
Just a quick note, there is an automatic shut-off on the Primus IQ. After 15 minutes or so of in activity, the controller will power down automatically. As soon as the controller detects movement, it comes back on. No battery drain, and you do not have to remember to turn the controller off or on.
Les H.
8/9/2015
what year Tundra in pics . I have a 08 and I am going to get an IQ for it . do you still like yours ? i guess a ground is needed ? I see what looks like a one white wire with harness
by: alan01/18/2017
installed on a 2009 F-150 everything was as advertised. It was plug and play. My truck had the wire plug behind the dash so was easy to hook up. I installed it in the hole below the coin holder. To reach the pre-wired plug you have to remove the panel anyway. I don't like any wires showing or anything I might hit with my leg. So did not mount it on the lower dash. You have to pull the plastic box out to unplug the connector. So just cut off the back of the box off and run the connector through the hole and connect to the controller. This way you can remove the controller anytime you want. Also you can see the readout much easier then mounting it on the lower dash. See pics
Alan
1/18/2018
flawless
by: Shawn W.04/10/2020
I've been running the Tekonsha Primus IQ for just over a year now. Very pleased w/ it.
Simple set up & operation. I tow a variety of trailers w/ my '07 2500 HD including dump trailer w/ firewood, car hauler, and enclosed cargo trailer. The weights are anywhere from empty, to 5k. Very easy to adjust as conditions change. I borrowed a trailer from a family member and the controller picked up a short. Come to find out a wire was pinched from ramps being slid in on the underside. The digital screen notified me before loading it up and hitting the road. I would recommend this product.
by: William03/02/2021
Works like a dream on my single axle 3200 lb travel trailer and my 2017 Toyota Tacoma. Like many of the other Tacoma owner reviewers, I mounted my Tekonsha Primus IQ controller in the small cubby to the left of the steering wheel and ran a couple screws up through the lower switch access to mount the bracket hidden inside the dash. Ended up looking like a factory install, exposing just enough of the unit to access the controls and read the display.
by: Li Zhang11/09/2017
This is a great controller, recommended by my trailer manufacturer. I actually don't know too much about it, how it works, etc. But it doesn't require much knowledge to use it. Install it like instructed by etrailer it just works. You can see the number goes up as you apply more pressure on the brake pedal, and the trailer stops with no problem. It's magic.
The only thing I wished they do is to supply a longer length of the thin wire to connect to the break line. For my 2013 CRV, the break line you need to tap into is on the left side of the steering column, if you want to install the break controller on the right side, the wire is a little so short; but you can make it, it's just a little tight. I want to install the break controller to the right side of the steering column because I don't want to accidentally bump into it every time I get in and out of the car. It's a great, the best product though.
by: David06/17/2014
Installed quickly an easily into my 2009 GMC Sierra 2500HD by wiring up to the factory harness. Be sure to watch the etrailer.com video to see which wires need connected at the fuse box in the engine compartment! (Easy hook-ups, just need to make sure you see which ones get hooked up and where.)
And if you don't use your ash tray, these brake controllers squeeze nicely into the ash tray compartment/recess in the lower part of the dash. Makes a great place to keep most of the controller out of the way and it's easy to install (you will have to create 2x new holes in the plastic detachable controller mounting bracket but its very easy - you can see the mounting screws in the 'new' holes and the old holes go unused as shown in the photo).
Only had a trailer hooked up once, but the controller functioned as designed. I think the 'Boost' function will come in handy if I use a well-loaded trailer and need some additional stopping power from the trailer.
by: Jim H.06/11/2014
Shipping was great. Stared at it for a couple of days before unpacking. The trailer connector mounting was easy with the holes almost matching the existing holes on my 2013 Toyota Highlander. The first four wires are a snap, they are just plugged into the existing four pin connector. I routed the two wire cable towards the front using ty wraps and improvised L brackets fixed to existing chassis screws.
I mounted the Circuit Breakers on the inside of the left fender making sure there was hood clearance (see photo). Then I hit a snag. There was no easy way to get the brake and 12V power wire to the brake controller inside the car. For grins, I goggled "brake controller video" for my car and came up with a video made by "eTrailer." (Thank you eTrailer) Three things from the video helped me: wire access from inside the car through the firewall, a place to mount the controller and how to locate the brake wire. After the installation I had 18" of two wire cable left over. The install took me about six hours. (I'm 71 and I took my time.)
A couple days later I connected the trailer for a test ride. The brake controller worked like a dream.
Things I liked: Retaining the four wire trailer plug setup next to the seven wire trailer plug. Controller display works but you don't have to look at it. The two wire cable was adequate for the job. Being an Engineer (retired) I worry about things like that.
Thing I didn't like: The mounting plate for the trailer plug is a little weak. A stiffer plate would have been better suited for me. and, oh yeh, somebody else to install it. ;=)
by: Tim03/06/2024
Took me about 10 minutes to install on my 2000 Chevy Silverado. Plug and play.
by: Apache Paul12/09/2023
I installed the Tekonsha Primus IQ Brake controller in my brother's 4 Runner just before he and his wife took their small (18 ft) camper on a month long trip out west. It did what was expected of it... Proportional brake control, with little adjustment after initial set up!
by: Terry G08/21/2018
Installed in my 2014 GMC Acadia in about 30 minutes. Used the GMC plug-in wiring adapter. No problems. Looks like it was made for that location.
Terry G.
8/21/2019
Still working great
by: Shane06/09/2021
2011 f150 3.5EB XLT superCrew. Easy plug and play install with the harness I bought also on etrailer, the problem was mounting. I hated the way the supplied mounts looked and didn’t want to bump into it. With some careful measuring and a hacksaw I was able to mount it inside the “plastic cup thingy” that fills the void where the factory controller would be. Attached pictures, the factory plastic cup thingy screws keep it locked in place and the supplies screws let’s you mount the controller into the plastic cup. Looks crooked with the white/silver plastic covering but it is aligned with direction of travel and level, also berey snug and mounted solidly.
by: Erick S07/26/2016
IT WORKED PERFECTLY. This is my first time to purchase, install, and use a brake controller. Add to top it off, it was my first time to pull a trailer. It was on a Saturday, exactly six days before a scheduled tent-camping trip, when my wife found a good deal on a used pop up camper. The camper was equipped with electric brakes, so it was required to install a brake controller on my SUV. It was Sunday (next day) when I ordered the Tekonsha TK90160, along with the other necessary part numbers #118449, #A0500, #18136, #ETBC7. I was planning to take the parts to a shop to have it installed as soon as I received them. I was hoping I can get them on Tuesday, but UPS dropped it off to the local post office, which caused it to be delivered at 3pm on Wednesday afternoon. The shops that I went to either did not have an installer available, or were all booked for the week. I had to "take courage" and install it myself. I am so thankful that etrailer.com provides extensive videos of reviews, installation, and operation of the products that they sell. I made the connections as shown and hoped for the best. I picked up the camper on Thursday, and was sooo relieved that it worked perfectly. We took off on Friday and the camping trip was a success. We are looking forward to making more good memories with our camper. Thank you etrailer!
by: majusa10/17/2017
Installation was straightforward with help from the online videos. I also installed the ETBC7 universal installation kit. At first I thought etrailer had shorted some parts, but it turns out that the 18140 bracket is sold separately. Had to take back the choice words I uttered under breath. Ended up mounting the provided bracket directly to the hitch with screws which was a little more difficult. As a safety measure--and a little on the overboard side--I also used a dremel to cut a small slit in the center of the provided bracket so I could attach a hose clamp similar to the one in 18140.
Space inside the cab for mounting the brake controller was tight.
Nonetheless, all works fine per my test meter. Don't yet have a trailer to connect, but meter checks out fine.
by: Tommy 04/10/2024
Loved this thing on my 4Runner towing our 4,000 pound trailer over 8k miles last summer. Saved us at least twice on the Highway and nice to adjust the sensitivity for city.
by: Adam12/10/2023
I love these controlers. Can adjust perfectly and no jerking of the e brakes. Big on stopping whether it’s a hard or soft stop. No locking up of the trailer wheels.
by: Christian03/30/2018
Installed this in my 2018 Tacoma TRD Off Road.
After removing the sill trim and Kick plate to find the Factory Plug.
I took the Bottom left dash down (3 Bolts) and some clips to gain access to the small cubby on the left of the steering wheel. Popped it out, trimmed it to fit with my Dremel and held the Unit in place with 3-M automotive trim tape. I only had to cut the sides of the cubby and a square hole for the plug to the unit. Looks Factory installed.
All in all it took a couple of hours to do. my truck has only 135 miles on it so I was extremely careful.
As you can see by the pics it's not in the way at all.
It could also be put in the center console but it has a wireless charger and I didn't want any Electronic interference or block access to my coffee cup holders.
by: Charles 01/22/2022
I haven't hooked up my trailer yet but the connecting and mounting instructions are easy to follow and my vehicle came with a brake controller wiring pigtail which made installation even easier. It powers up and responds the way it is supposed to. I have no doubt it will work properly based on hundreds of other 5 star ratings.
Charles
1/22/2023
I finally installed the brake controller and it was easy to follow the instructions and it worked perfectly during my test runs. Shortly thereafter the wife decided the Expedition was too large for her to drive comfortably and we sold it. Not my first experience with Tekonsha brake controllers. It is a reliable product.
by: David 01/14/2023
Not my first Tekonsha and it won't be my last. Their brake controllers are flawless and easy to install, especially with a Tekonsha adapter. Installation took me no more than 15 minutes. The hardest part is figuring out where to mount the controller on my dashboard.
by: Garry04/07/2018
I ordered and received my Tekonsha Primus IQ brake controller with wiring harness for my 2012 Ford Expedition. To keep from drilling mounting holes for the contoller, I double backed taped it to the top of the center console. In order to hide the wires, I had to strip some of the braided wire loom protective cover away so to be able to push the wires through the gap between the dash and console. The installation came out very clean and access to the controller couldnt be better.
Hooked up the trailer and took it for a drive. Within a few "stops" I had the brake system dialed in.Working perfectly.
PICTURES ATTACHED.
by: Steven 04/18/2024
The controller works good and am quite happy with it.
by: Alvin02/16/2022
Installed easily and now trailer brakes better with truck with no lock ups and is easily adjustable to road conditions while in motion. It is very nice to look at display and see the trailer plug is or is not connected.
Alvin
2/17/2023
What I have really appreciated is the ability to adjust the brakes as circumstances dictate. By glancing at display when I brake, to see how the trailer is responding, gives me real time ability to adjust as needed.
by: Curtis 02/05/2024
Only used on last year's trip,worked flawlessly once set.Would recommend.2005 f150 with factory tow package.
25
2065
Show More Reviews
See what our Experts say about this Tekonsha Trailer Brake Controller
- Should Numbers on Tekonsha Primus IQ Show Up When Trailer isn't ConnectedThe Tekonsha Primus IQ # TK90160 only shows a number on the display when the brakes are applied if a trailer is connected and the brakes are being applied. Without a trailer connected a number would not show up. You might try connecting to a trailer and you should see the numbers show up.
view full answer... - Recommended Replacement for Draw-Tite Trailer Brake ControllerThe Draw-Tite, Tekonsha, and Reese trailer brake controllers all use the same connector so you can switch between them very easily. The mounting brackets are even the same in most cases. I recommend the Tekonsha Primus IQ Trailer Brake Controller part # TK90160 as it's their best bang for your buck option with proportional design, integrated safeguards, and boosts settings for increased performance.
view full answer... - Should My Tekonsha PRIMUS IQ Brake Controller # TK90160 Always Have Constant PowerThe brake controller needs to be connected to a constant power source so that the settings on the brake controller are not lost. When the brake controller is unplugged, the brake controller is reset and needs to be setup again. Having constant power to the brake controller is the correct way to have the brake controller wired on your 1995 Chevrolet Silverado and on any vehicle. You will not have to worry about the brake controller draining your battery as it draws milliamps of power. If...
view full answer... - Can I Drive a Short Distance Before Setting Brake Controller Settings on Tekonsha PRIMUS # TK90160If everything is hooked up, the brake controller will send power to the trailer brakes each time you apply the brakes on your truck. You should use the manual brake lever on the brake controller to activate the brakes until you are at a safe location to setup the controller. To set up the brake controller, you will want to use the manual slide to activate the trailer brakes to get them warm. Warming the brakes will simulate conditions when the brakes are being used. You will then follow...
view full answer... - Manual Knob Does Not Work On Tekonsha Primus IQ Brake Controller 2001 Dodge Ram PickupIf the manual slide is not working with the brake controller, you need to test the wires going into the brake controller, make sure you have power entering the brake controller on the black wire. On the red wire you will only want power when the brake pedal is pressed. If it is connected correctly it may be a problem with the unit. If your B1 setting is too high then you need to properly adjust your trailer brakes. I've linked below instructions on how to properly adjust the power to your...
view full answer... - Troubleshooting Primus IQ Brake Controller That Shows Connection But Doesn't Work with PedalThe issue is the red wire of the brake controller. It needs to be connected to a circuit that only sees voltage when the brakes are applied. It sounds like yours isn't connected anymore or on some vehicles the issue is that there is a blown third brake light fuse. This is especially true if the vehicle is a GM truck.
view full answer... - Troubleshooting Brake Controller that Applies Random Voltage with Bumps in the RoadCheck the red wire of your brake controller. Sounds like it is shorting out to a 12 volt power source which is telling the controller that it needs to be looking for braking activity and apply braking voltage. When a proportional brake controller has voltage on the red wire it looks for any change in inertia and will apply braking power in a proportional amount to that. So if you can make sure your red wire is connected only to a power source that's active when the brake pedal is applied...
view full answer... - Should Brake Controller be Set Up Again When Towing New TrailerEvery trailer has slightly different brake sensitivities. Going to a new trailer would require you to set up the brake controller again. You may find that the setup is very similar to the old trailer but it should still be done so that you have a safe towing experience.
view full answer...
- Does a Tekonsha Primus IQ Brake Controller Need to be Removed when Not In UseAs long as it's not in the way for your daily vehicle use you will be just fine to leave your Primus IQ brake controller part # TK90160 installed all the time as that is what nearly everyone does with their controllers. Now if the controller is getting in the way and you are banging your leg on it or you just don't like it sitting there you could easily unplug it and store it till you need it.
view full answer... - How to Install a Tekonsha Primus IQ Brake Controller in a 2014 Chevy SuburbanOn your 2014 Chevy Suburban there is a set of 4 blunt cut wires under the dash of your vehicle that you will be able to use to install your Tekonsha Primus IQ Trailer Brake Controller # TK90160. GM didn't offer a plug-in style port for your vehicle so I am not sure what harness you would have, but I do know it will not work on your vehicle. Check out the install video and help article I attached for more info on how to install a brake controller in your vehicle.
view full answer... - Installing the Tekonsha Primus IQ Brake Controller on a 2013 Chevrolet SilveradoI have attached a help article and an installation video that shows how to install your Tekonsha Primus IQ Brake Controller, # TK90160, on your 2013 Chevrolet Silverado for you to check out. You may notice that the truck in the video is a 2011 model, but the installation will be the same on your 2013 model. To install the brake controller, you will need to find the factory brake control harness under the dash. They will be tied together with white tape to the left of the brake pedal....
view full answer... - How Does Tekonsha Primus IQ Brake Controller Install in 2019 Chevy Express Van 2500While there isn't a port under the dash of your 2019 Chevy Express Van 2500 for installing a brake controller some of the wiring is already there. Vehicles with the 7-Way tow package have the blue output brake wire already ran from the back to the front. It is located under the dash near the emergency brake pedal or it is sometimes taped and tucked under the driver side floor mat up towards the firewall. I attached an install video that shows the Tekonsha Primus IQ # TK90160 installed...
view full answer... - Adjusting Tekonsha Primus TK90160 Brake Controller That's Making Trailer Brakes Lock UpThe first thing you'll want to do is make sure the controller is installed so that it is in the proper operating orientation. The controller needs to be pointed parallel to the direction of travel, on a level plane side to side. On a front to back axis, it needs to be between level and 70 degrees above level, as shown in the diagram I've provided. Secondly, make sure the controller's been properly adjusted. Just to the left of the LED display, is the wheel that controls how much voltage...
view full answer...
- How to Find the Correct Stop Light Switch Wire on a 2017 Ford Transit T-250The stop light switch wire that you will need to connect the red wire to on your brake controller is a purple/white wire located in the # 4 pin. You can see the process shown in the attached video on a 2016 Ford Transit T-250 which will be the same as your 2017 Ford Transit T-250.
view full answer... - Intermittent Error Code of Tekonsha Primus IQ Brake ControllerWhat you are most likely seeing is an intermittent connection issue due to dirt or corrosion on the pins of your trailer wiring. Try taking sandpaper to clean all the pins of the connectors and that should fix the problem.
view full answer... - Troubleshooting Brake Controller That Doesnt Work with Brake PedalI wouldn't say it's a common problem for the integrated brake controllers of trucks to not work with the brake pedal but when this happens it's almost always a blown third brake light fuse or possibly other brake light circuits. I also attached a help article on troubleshooting brake controller installs for you to check out as well.
view full answer... - Installation Of Brake Controller On 2009 Cadillac Escalade PlatinumThere is no brake controller plug-in port on your 2009 Escalade but the wiring is present under your dash to the left of the brake pedal. I have attached a link to an installation video of a brake controller on a 2009 Escalade you can check out. Just go to about the 1:40 mark on the video and it shows where the wiring can be found and how to complete the brake controller installation. The wiring harness is about 4 inches behind the onboard diagnostic port. There will be a piece of white...
view full answer... - Can Tekonsha Primus IQ Brake Controller be Unplugged and Still FunctionYes, you can disable or unplug the Tekonsha Primus IQ part # TK90160 in any way that you like and your truck will still function fine. If you unplugged the controller the harness has all of it's circuits separated and insulated well enough that there wouldn't be an risk of a short between them.
view full answer... - Red Light Flashes on Primus IQ After Battery Was Replaced on a 2005 Chevrolet ColoradoThe first step I would take is to reset the brake controller. To do this, you simply unplug the connector at the back of the brake controller for about 20 seconds and the reconnect the connector to the brake controller. I spoke with my contact at Tekonsha and he told me that this can happen when the vehicle batteries are replaced, especially if the brake controller is left connected in the vehicle while the battery is being replaced. If you reset the brake controller and continue to...
view full answer... - Why Does Light of Tekonsha Primus Brake Controller Stay On The indicator of a brake controller will stay on for several minutes after the vehicle has been turned off and exited. If you leave the vehicle undisturbed the controller will go into sleep mode and the light should go off. However, even if it did the amperage draw of the LED light is so miniscule that it would take months to drain a vehicle battery. Which by then the battery would be dead from inactivity.
view full answer... - Primus IQ Brake Controller Installation in 2013 Chevy SilveradoThe Tekonsha Primus Trailer Brake Controller # TK90160 will be a hard-wired installation in your 2013 Chevrolet Silverado since there is no connection port under the dash. The needed wires are already run for you. Below the steering column, there is a bundle of wires tied together with white tape, located left of the brake pedal. This bundle of wires is the tow package for the brake controller. Carefully cut the white tape binding the wires, and pull the wires down from underneath the...
view full answer... - How Does Brake Controller Install in 2007 Chevy AvalancheYour Tekonsha Primus IQ part # TK90160 can install in your 2007 Chevy Avalanche pretty easily but there isn't a connector under the dash for installing the controller. You will connect the brake controller wiring with the vehicle wiring already present under the dash. If you check out the link I attached you will see a guide for installing a controller in a truck just like yours.
view full answer... - Display on Tekonsha Primus IQ Brake Controller # TK90160 Indicates .c.There is nothing wrong with your Tekonsha Primus IQ brake controller. The display .c. indicates that your controller is receiving power, that your trailer is connected, and that the controller's boost feature is engaged. Please refer to the linked installation/operation instructions for the Primus IQ # TK90160. These explain the various display messages that can appear on your controller.
view full answer... - Troubleshooting a Tekonsha Primus Brake Controller # TK90160 That has Power But Does not WorkAre there any error codes popping up with your controller now that it seems to no longer be working? If not, it almost sounds like your trailer connector is not making good contact anymore and its not able to send brake voltage to your trailer. Unless somehow the power knob got turned all the way down it should function just like it did as long as everything is hooked up correctly. I also attached an FAQ article and video on troubleshooting brake controllers that you might find informative...
view full answer...
Do you have a question about this Trailer Brake Controller?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Shane T
Test Fit:
Alan C
Test Fit:
Randy B
Test Fit:
Jared G
Test Fit:
Andrew S
Test Fit:
Brent H
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
Conner L
Test Fit:
David F
Test Fit:
Ryan G
Test Fit:
Adam E
Test Fit:
Clayton O
Test Fit:
Bradley B
Expert Research:
Jackie C
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Brandon M
Expert Research:
Adam R
Expert Research:
Rachael H
Expert Research:
Jeffrey L
Video Edited:
Zack K
Video Edited:
Andrew K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Andrew L
Video Edited:
Mike H
Video Edited:
Dustin K
Video Edited:
Sue W
Video Edited:
Chris R
Video Edited:
Zach D
Updated by:
Adele M
Updated by:
Kathleen M
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Isabelle B
Updated by:
Manda E
Updated by:
Amanda K
Installed by:
Cole B
Video by:
Jonathan Y
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
J
12/19/2014
Thanks Patrick for the follow-up. The brake controller, for the camp trailer, installation went relatively easy and operation of the unit continues to be great. More importantly is your product follow-up for Customer Service...providing a r-e-a-l name vs. Customer Service dept. along with a phone number and email contact information all pretty rare in todays environment. E-Trailer continues to be my first-source for product information search.