Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers
(159 reviews)
Price: $17.18
In Stock
Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers
Item # 3064-P
Retail:$31.59
Our Price: $17.18
You Save: 46%
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (159)
- Q & A (0)
- Photos
Tekonsha Accessories and Parts - 3064-P
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Tekonsha
- Vehicle Specific
Install your electric brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in harness beneath your vehicle's dash.
Features:
- Wiring adapter eases installation of your electric brake controller
- Custom connector end plugs into the built-in port beneath the dash of your vehicle
- Other end plugs into the back of your electric brake controller
- Compatible time-delayed brake controllers: Draw-Tite Activator I (5100), Draw-Tite Activator II (5500), Draw-Tite Activator III (5520) and Tekonsha PowerTrac (39523)
- Compatible proportional brake controllers: Tekonsha Prodigy (90185), Tekonsha P2 (90885), Tekonsha P3 (90195), Tekonsha Primus IQ (TK90160) and Tekonsha Voyager (39510)
- Limited 1-year warranty
Installation of Tekonsha Brake Controller Adapter
This adapter plugs into the 5-pin connector on your vehicle's built-in brake control wiring harness. The harness is located underneath the dash, to the left of the steering column, taped to another harness near the emergency brake pedal.
To install your electric brake controller you need to connect the wiring of the controller to your vehicle. Certain manufacturers offer pre-wired options, typically known as tow packages, wherein these wires are run for you from the dash to the trailer connector on the back of your vehicle. Often, a brake controller wiring harness is included with your tow package. This harness plugs into a port beneath your dash and connects to the four wires of the brake controller. If, however, you have a brake controller with a plug in place of the four loose wires, you can use the Tekonsha adapter.
This adapter requires no hardwiring. It is designed to plug directly into your electric brake controller for the simplest installation possible. Because there are no wires to connect, installation is not permanent. You can unplug and remove your brake controller at any time and securely stow it away.
306400 Tekonsha Brake Control Wiring Adapter with 2 Plugs
Replaces 3064-P
Installation Details
This Product Fits The Following Vehicles
- 2019 - 2024 GMC Sierra 1500 with factory Tow Package
- 2022 - 2022 GMC Sierra 1500 Limited with factory Tow Package
- 2020 - 2024 GMC Sierra 2500 with factory Tow Package
- 2020 - 2024 GMC Sierra 3500 with factory Tow Package
- 2019 - 2024 Chevrolet Silverado 1500 with factory Tow Package
- 2022 - 2022 Chevrolet Silverado 1500 LTD with factory Tow Package
- 2020 - 2024 Chevrolet Silverado 2500 with factory Tow Package
- 2020 - 2024 Chevrolet Silverado 3500 with factory Tow Package
California residents: click here
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Did not arrive in time
- Product did not meet expectations
Customer Reviews
Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - 3064-P
Average Customer Rating: 4.9 out of 5 stars (158 Customer Reviews)
Install your electric brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in harness beneath your vehicle's dash.by: Richard 07/31/2022
I haven't had this brake controller installed yet, but it looks like it's fairly straight forward and easy to do, even for someone that's not very mechanically inclined. We'll see how it goes. I received the brake controller device and the wiring device in minimum time, very quick to arrive!!
by: Steve 04/22/2024
I needed a harness adapter to move my Tekonsha brake controller from my old pickup to my new one. The customer service folks at etrailer quickly helped me with the exact one I needed and it was in my hands three days later, perfect fit and I’m up and running. Etrailer has been my go-to for all my trailering and RV needs hot several years and they’ve always come through!
by: Patrick 02/17/2024
I've installed 3 plug in Tekonsha adapters for 3 different vehicles and found them all to be to specifications making the installation a breeze
by: Fred02/27/2024
If you want to mount your controller at the center of your dash the harness will reach it but not long enough to hide wires under the dash,just to darn short
by: Otto G12/05/2020
Very easy installation in about twenty minutes. Connected effortlessly to both the brake controller and the truck wiring.
by: Carl05/15/2023
the controller has great reviews, I got it because my factory controller wasn't working well with the new camper that has electric/hydraulic brakes and I was experiencing a 5 second lag for the trailer brakes to come on. this controller works better with a 2 to 3 second lag, need to try a couple different combos on settings, have the boost at 3 (per recommendations) and gain at 2.5 and under hard braking it locks up the trailer tires. going to try boost on 2 and bump up the gain and see if that works better.
by: John01/23/2024
work great for my application
by: Jack07/10/2021
Quality product. Easy install.
Jack
7/13/2022
Works good. Happy with the location where I put it.
by: Gary 03/30/2024
Got it hooked up in no time very simple haven’t tried it yet I am sure it will be what I want good product
by: Ron 03/25/2024
Great selection and communication.
by: Harold 01/18/2022
The wiring adapter came 2 days early and was easy to install.
Harold S.
1/19/2023
The brake controller is still working great after 1 year.
by: Steven03/09/2022
I had the Primus IQ trailer braking system in my 2018 GMC pickup. When I traded it in and got a 2021 GMC I needed to update the wiring harness The unit worked fine but the harness was different. So I ordered a new direct connect harness and it was simple as plug and play! The Primus IQ braking system works absolutely perfectly as I said all I needed to do was update the harness and I was able to move the trailer braking system from the 2018 to the 2021 GMC pickup. The installation of the whole thing took a matter of minutes. Very impressed with the braking system as well as the information given to me from etrailer on how to do it. A technical support staff and front office folks are very attentive and educated on the products that they sell. I'm a return customer many times over and appreciate all they do.
by: James 02/17/2024
Great service and the free shipping was faster than expected. Products arrived three days early.
by: Bobby 02/08/2024
Works great!
by: Don02/10/2024
Fits perfectly! Exactly what I needed.
by: Jake 08/20/2021
GMC
I used this wire harness on a 2019 GMC truck to connect a trailer brake controller. After removing the protective cover from the truck's under dash connector I was able to plug in the harness with no issues.
by: Matthew 02/03/2024
Works great
by: Paul 03/18/2023
This adapter truly made the Trailer brake controller plug and play.... Verry Happy
by: Jason09/09/2022
was delivered quick,and fit perfect. made installing my brake controller very easy. Thx etrailer.
by: Tim 08/04/2023
Arrived on time as requested. It’s a simple plug and play install. I tested it out on my camper. It’s definitely the best I have ever used in 40 years
Customer service is amazing! I sent and inquiry about delivery and received 2 reply’s following up.
This company is the best!
Thank you for your support and service
by: Mike04/24/2022
2016 Chevrolet Silverado
This wiring adapter works perfectly!!! Plug and play. I had one on my 2016 Silverado 1500 4x4. I got a new 2021 and this model required a different adapter. Etrailer had a great price and they got the adapter shipped to me quickly.
by: Christine10/01/2019
I took the plug that came with my 2019 Chevy PU and soldered the two pig tails together and they did not work. I finally ordered the new harness and it worked!
Thanks for all of your help with getting back on the road quickly! I could have saved a lot of time and bother getting this harness with the break controller. Once again thanks for helping with the trouble shooting. With etrailer you get a life person to talk to if you need. I communicated with email, and phone.
by: Robert07/27/2022
We added the Prodigy 2 as an aftermarket controller to our 2019 Chevy Suburban that we use to tow a climbing wall, kayak trailer and bike trailer. Installation was as simple as can be and it makes the towing experience much nicer. The only hiccup was that there was a hiccup with what adapter the system thought we needed and so we were sent the wrong one. Fortunately, etrailers customer service was top notch and they resolved the issue and made everything right!
by: Timothy 11/03/2022
These items are working fine thank you to etrailer!
by: Jason 09/21/2022
This made the installation process a breeze. Recommend to anyone
25
159
Show More Reviews
See what our Experts say about this Tekonsha Accessories and Parts
- Tekonsha Brake Controller Wiring Harness For 2024 Chevy Silverado 1500Hi there Ron; the correct Tekonsha brake controller wiring harness for your 2024 Chevy Silverado 1500 is the following: - Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers # 3064-P
view full answer... - Parts Needed To Install The Draw-Tite Brake Controller On A 2022 Chevrolet Silverado 1500Since you already have the factory towing package you're already going to have 90 percent of what you need, which is good for you! To install the Draw-Tite Brake Controller, on your 2022 Chevrolet Silverado 1500, you're just going to need the adapter # 3064-P as well. From here you will pick a good mounting location, and plug the adapter into the under-dash junction box and then to the back of the controller. From here you should be good to go! I have included an review video as well...
view full answer... - Which Brake Controller Adapter Plug for 2020 Chevy Silverado 1500The # 3064-P is the correct brake controller adapter for both the 2019 and 2020 versions of the Chevrolet Silverado and GMC Sierra 1500, so you've got the correct adapter to allow for a plug and play brake controller installation.
view full answer... - Correct Wiring Adapter for a Tekonsha P2 Brake Controller on a 2021 Chevrolet Silverado 1500The Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers # 3064-P is the correct plug in harness for your Prodigy P2 in your 2021 Chevrolet Silverado 1500. As far as it being too short, It absolutely should not be an you saying that makes me think you might be looking at the wrong thing. You should find your harness located underneath the dash, to the left of the steering column, taped to another harness near the emergency brake pedal. The adapter is plenty long for where it...
view full answer... - Where is the Dummy Plug to Install a Brake Controller Adapter on 2019 Chevrolet Silverado 1500I've linked the installation video of a brake controller on a 2018 Chevy Silverado 1500 for you to have a look at, as well as provided a photo of the plug you're looking for- the process will be the same on your 2019 Silverado 1500. If you fast forward to around the 1:45 mark of the video, it shows where the plug can be found under the panel on the left hand side of the steering column. This is where you will install the Tekonsha Plug-In Wiring Adapter # 3064-P.
view full answer...
- Where Is The Factory Brake Controller Port In A 2021 Chevy Silverado 1500The factory brake controller port on a 2021 Chevy Silverado 1500 is towards the left side under the dash, just above three other wire harness connections and the lower vent tube for your Silverado's AC system. It will be mounted facing downward and have a cap/dummy plug connected to it that you'll need to remove. If you're installing a Tekonsha or Redarc brake controller then you'll want the # 3064-P instead of the # 3024-P that you were looking at. In the attached video below Dave will...
view full answer...
- Adding An Aftermarket Brake Controller To Replace The Factory Controller On A 2020 GMC 3500When you add an aftermarket brake controller like the Tekonsha Prodigy P3 # 90195 to your 2020 GMC Sierra 3500, you will need to have the computer flashed by a GMC dealer to disable the factory brake controller. If you do not do this the computer will throw a trouble code and likely neither controller will work properly. A Tekonsha Plug-In Wiring Adapter # 3064-P will allow you to plug directly into the connection on your Sierra.
view full answer... - Aftermarket Brake Controller For A 2020 Chevrolet Silverado 2500 With A Factory Brake ControllerFor your 2020 Chevrolet 2500 I recommed the Tekonsha PowerTrac Electronic Brake Controller - 1 to 2 Axles - Time Delayed Item # 39523. This controller has the time delay feature as well as automatic leveling. The adapter cable you need for your truck is going to be the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers Item # 3064-P. To get your factory brake controller enabled you need to take it to a dealership and have them flash the computer to have it turned off. If you...
view full answer... - Recommended Trailer Brake Controller for a 2022 Chevy Silverado 1500 RSTIf you're looking for the best and most tried and true electric trailer brake controller option on the market then it's hard to make a case against the Tekonsha Prodigy P3 Trailer Brake Controller part # 90195 with its easy to read display, built-in safeguards, and storable settings. It can be installed on a 2022 Chevrolet Silverado 1500 RST without splicing using the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers part # 3064-P. You'll have to drill two small holes in the...
view full answer... - Install Harness for Prodigy P3 for 2023 Chevy Silverado 1500To install your Prodigy P3 part # 90195 in your 2023 Chevy Silverado 1500 the correct install harness is the part # 3064-P.
view full answer... - Recommended Trailer Brake Controller And Plug-In Wiring Adapter For 2021 Chevrolet Silverado 1500For your 2021 Chevrolet Silverado 1500 I recommend the Tekonsha Prodigy P3 # 90195 as it is an extremely reliable trailer brake controller and has great features like an easy to read LCD screen, and built in diagnostics that are easy to read and understand. To install the # 90195 you will need the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers # 3064-P which will plug into the factory trailer connector port underneath the dash and take care of all of the wiring the trailer...
view full answer... - Can The Factory Trailer Brake Controller On a 2024 GMC Sierra 2500 Be Switched With an Aftermarket? You can replace the factory brake controller on your 2024 GMC Sierra 2500 with an aftermarket like the Tekonsha Prodigy P3 # 90195. First you will need to have the programming for your factory controller removed by a dealer before you can connect the P3 with the Wiring Adapter # 3064-P.
view full answer... - Correct Plug In Wiring Adapter To Install Tekonsha Prodigy P3 90195 In 2021 Chevy Silverado 1500To install the Tekonsha Prodigy P3 # 90195 you purchased in your 2021 Chevrolet Silverado 1500 Crew Cab with the 3.0L Diesel engine you will need the Tekonsha Plug-In Wiring Adapter # 3064-P. This will plug into the factory trailer brake controller port located underneath the dash of your truck and the directly into the back of the P3. I included videos of the products mentioned for you to take a look at.
view full answer... - Does Integrated Brake Controller of 2020 Chevy Silverado 3500 Disable to Install Prodigy P2You would not have to disable the factory controller of your 2020 Chevy Silverado 3500 that you installed the Prodigy P2 part # 90885 and install harness # 3064-P in. You'd need to do some wiring though which you can see at the attached help article.
view full answer... - Can I Use The Tekonsha Prodigy P3 In My 2023 Chevy Silverado 1500?Yes, you can absolutely use the Tekonsha P3 # 90195 in your 2023 Silverado 1500. Provided your vehicle has a factory 7 way plug on the back. You also have the option of using a plug and play pigtail # 3064-P. Just mount the controller in your desired location, and plug into the brake control port under your dash and you will be good to go.
view full answer... - Where is Brake Controller Port on 2019 Chevy Silverado 1500To install a brake controller like the Prodigy P3 part # 90195 in your 2019 Chevy Silverado 1500 what you need is the install harness part # 3064-P which does plug into the port under your dash. The easiest way for me to describe where you'll find it is to have you check out the install video link I attached to this page that will walk you through the entire process.
view full answer... - Can an Aftermarket Brake Controller Be Used on a 2022 Chevrolet Silverado without IssueI am sorry to hear that you are having some problems with your new truck. But yes, you can add an aftermarket brake controller without causing issues with the electronics in your truck. You will get error codes on your dash using an aftermarket controller, but you can prevent that from happening by having your truck flashed at the dealership to remove the integrated brake module. For your 2022 Chevrolet Silverado 1500, you can use the Tekonsha Prodigy P2 Trailer Brake Controller # 90885...
view full answer... - Install Harness for Prodigy P3 Brake Controller for 2021 Chevy SuburbanTo install the Prodigy P3 brake controller part # 90195 in your 2021 Chevy Suburban would require the install harness part # 3064-P which plugs in under the dash.
view full answer... - Will the Tekonsha Plug-In Wiring Adapter # 3064-P Work with My 2020 Chevrolet Silverado 1500?Yes, the Tekonsha Plug-In Wiring Adapter # 3064-P will work with your 2020 Chevrolet Silverado. In order for it to work, you will need a compatible brake controller like the Tekonsha Prodigy P2 Trailer Brake Controller # 90885. Once it is installed into your wiring system of your vehicle, you will instantly be able to power your brake control system. This is a plug-and-play adapter.
view full answer... - Install Harness for Installing Tekonsha PowerTrac in 2019 Chevy Silverado 1500The Tekonsha PowerTrac part # 39523 does not come with truck specific install harness you'd need to install it in your 2019 Chevy Silverado 1500 but all you'd need for that in addition to the controller is the part # 3064-P and you'd be set. I attached an install video for a similar controller in a 2019 Silverado just like yours that uses the correct harness # 3064-P that you need as well.
view full answer... - Install Harness for Prodigy P3 Brake Controller for 2020 Chevy Silverado 2500To install the P3 brake controller you have part # 90195 in your 2020 Chevy Silverado 2500 all you need is the install harness part # 3064-P and you'd be set. This plugs right into the port you have under your dash. I attached a picture of what the connector on your truck looks like as well.
view full answer...
- Location of Brake Controller Plug on 2019 Chevy Silverado 1500I took a look at the owner's manual for the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers # 3064-P which plugs into your Prodigy P3 # 90195 trailer brake controller and it says the harness for your 2019 Chevy Silverado 1500 "will be located underneath the dash and left of the steering column, taped to another harness near the emergency brake pedal. There will be a 14-pin connector that mates with the one on the adapter." The accompanying cut out of the directions shows...
view full answer...
- Brake Controller Plug Location for 2020 Chevy Silverado 1500The plug for a brake controller on your 2020 Chevy Silverado 1500 will be located up under your driver's side dash on the left side (see attached). This is where you will plug in an adapter like the Tekonsha # 3064-P for a brake controller like the Tekonsha Prodigy P3 # 90195. I have attached the installation instructions for this adapter kit for you to check out as well.
view full answer...
- Troubleshooting No Power To Blue Wire Pressing Brake Pedal For Tekonsha Voyager On 2021 SilveradoAs the Tekonsha Voyager # 39510 is a proportional trailer brake controller you will need to be moving with a trailer connected to get power output on the blue brake wire of the controller. If you are sitting still pressing on the brake pedal it will not send any power through the blue wire since it does not sense the vehicle coming to a stop. We do offer the Tekonsha Plug-In Wiring Adapter # 3064-P for your 2021 Chevrolet Silverado 1500 which will allow you to connect directly from your...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Edited by:
Lindsey S
Installed by:
Kathleen M
Installed by:
David F
Video by:
Dustin K
Updated by:
Wilson B
Updated by:
Isabelle B
Written by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Richard T.
8/1/2023
The brake controller worked excellent, never a problem.