Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
(2635 reviews)
Price: $149.90
In Stock
Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
Item # 90885
Our Price: $149.90
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (2635)
- Q & A (0)
- Photos
Tekonsha Trailer Brake Controller - 90885
- Electric
- Electric over Hydraulic
- Proportional Controller
- Up to 4 Axles
- Tekonsha
- Under-Dash Box
- Dash Mount
- Automatic Leveling
- Up to 360 Degrees
- LED Display
This proportional brake controller keeps it simple with intuitive controls that are easy to use. Includes a large, digital LED display, 3 boost levels, battery protection, and continuous diagnostics.
Features:
- Brake controller activates trailer brakes in proportion to your vehicle's braking action
- Automatically adjusts trailer's braking based on deceleration of tow vehicle
- Simple controls make it easy to operate the controller
- Gain setting lets you adjust the amount of power sent to the trailer's brakes
- 3 Boost levels let you adjust initial braking power and aggressiveness
- Built-in, rotary-style manual override lever is within easy reach for controlling trailer sway or stopping in emergencies
- Auto-dimming, blue LED display is easy to read
- Automatically adjusts screen brightness based on the current lighting conditions
- Built-in safeguards protect your vehicle, trailer, and the controller
- Runs continuous diagnostic checks to alert you to any potential problems
- Minimizes drain on car battery by drawing only 3.6 milliamps when not in use
- Prevents trailer brakes from overheating by reducing power output to them during prolonged stops
- Defends brake controller and trailer breakaway systems against shorts
- Automatic leveling lets you mount at any angle up and down for an easy installation
- Controller must be parallel with direction of travel and horizontally level
- Mounting bracket and hardware included
- Included harness hardwires to vehicle and plugs into controller
- Plug-in, vehicle-specific brake-control adapter (sold separately) available for select vehicles to reduce installation time
- Quick-disconnect feature lets you easily remove and store the controller when you don't need it
- Replacement wiring harness (sold separately) and replacement bracket (7686 - sold separately) required to swap controller between vehicles
Specs:
- Application: trailers with up to 4 axles (8 brake assemblies)
- Compatible with electric or electric-over-hydraulic trailer brakes
- Dimensions: 5-1/8" long x 3-1/8" wide x 2" tall
- Length of hardwire pigtail: 30"
- Mounting: 360 degrees vertically
- Limited lifetime warranty
Gain Power Adjustment
You can adjust the gain (also known as output) with the thumbwheel on the front of the controller. Gain lets you set the maximum amount of power that will be applied to your trailer's brakes. A heavier trailer will need more power to achieve smooth, safe braking, while a lighter trailer will need less. Typically, the gain is only readjusted when you experience changing road conditions or if the weight of your trailer changes.
Power Boost for Heavy-Duty Towing
The boost setting controls the aggressiveness of your trailer's braking, meaning how quickly the brakes reach the maximum braking level. You can adjust this when you're towing heavy loads and you need more umph to bring your trailer to a stop. Your tow vehicle doesn't need that much power to brake in time, but your heavy trailer does.
Depending on the level of boost, your trailer brakes can start at either 13 percent or 25 percent of the set gain. What this means is that, instead of starting at 0, the brakes will start at 25 percent and get to100 percent sooner. This keeps the trailer from pushing your tow vehicle forward.
If your trailer weighs less than your tow vehicle, no boost is needed. But, if you want your trailer to lead the braking, you can select level B1.
Boost Levels:
| Approximate Gross Trailer Weight | Boost Level | Increase in Initial Power Output |
|---|---|---|
| Less than tow vehicle GVW | B1 | 13% |
| Equal to tow vehicle GVW | B1 or B2 | 13% or 25% |
| Up to 25% more than tow vehicle GVW | B2 or B3* | 25% |
| Up to 40% more than tow vehicle GVW | B3* | 25% |
*Both B2 and B3 offer a 25-percent boost in initial power. But the braking curve for B3 is more aggressive than that of B2. This means that, even though you will start out with the same intensity when using these boost levels, you will get an overall more aggressive braking experience with the higher level. So if you use B3, you will reach maximum braking sooner than if you use B2.
Safety Features
The Prodigy P2 offers key safety features to prevent damage to various components of your towing setup. Integrated reverse battery protection shields the brake controller and your trailer's breakaway system from shorts. When the P2 is not in use, it will be in power-saving mode. In this setting, it draws only 3.6 milliamps, minimizing drain on your vehicle's battery.
The P2 also comes equipped with a hold feature to prevent wear on your brakes. When you're waiting at a red light, you don't need your trailer brakes on at full power. The longer you sit there, the more they will overheat. But with the P2, any time your tow vehicle and trailer are at a standstill with the brakes applied for more than 5 seconds, the hold feature will kick on and reduce power to just 25 percent. This will keep your trailer in place while saving your brakes.
The P2 keeps the manual override within easy reach, great for stopping sway or controlling your trailer's momentum in emergencies. To engage the manual override, just twist the rotary-style lever from right to left. This will activate the trailer's brakes and brake lights without you having to apply the brakes on your tow vehicle, perfect for limiting trailer movement while you're cruising.
The Prodigy P2 also offers diagnostics such as:
- Open ground
- Overload
- Output short
- Power loss
- No trailer connection
Automatic Leveling and Simple Installation
The self-leveling feature of the P2 ensures that the brake controller continues to function even as you drive up steep hills or through the mountains. Simply mount it in your cab at any vertical angle, and the controller will level itself automatically thanks to its 360-degree rotational range. This makes the installation that much easier. But keep in mind that the P2 must be horizontally level and parallel with the direction of travel to work correctly.
Installation is a snap. After mounting the P2 unit in your cab using the included bracket, hardwire one end of the included pigtail harness directly into your vehicle. The other end plugs into the brake controller. To remove the P2 for storage when you're not using it, just unplug the unit and slide it out of the bracket. With a replacement wiring harness (sold separately) and replacement bracket (P7685 - sold separately), you can even transfer the Prodigy P2 to another vehicle.
Installation Accessories
For even easier installation, a vehicle-specific specific wiring adapter (sold separately) is available for most newer trucks and SUVs. One end of the custom adapter plugs into your vehicle, and the other end plugs into the controller - no hardwiring required.
See also etrailer.com's exclusive 7- and 4-way brake-control installation kit (ETBC7 - sold separately) if you don't already have a 7-way plug at the back of your vehicle.
Note: If a custom brake control wiring adapter is not available for your vehicle, one of the following will be required:
20-Amp circuit breaker (9506P - sold separately) for 2- to 4-brake applications
30-Amp circuit breaker (38630 - sold separately) for 6- to 8-brake applications
Proportional Braking
The Tekonsha Prodigy P2 brake controller comes equipped with proportional braking to give you the best towing experience. Proportional braking means that your trailer brakes mimic your tow vehicle's brakes. If you slam on the brakes in your vehicle, your trailer brakes will activate with the same intensity; if you brake lightly, your trailer brakes lightly too. The trailer's braking is in proportion to your vehicle's braking. This saves wear and tear on the tires and the brakes on both your vehicle and trailer.
The Prodigy P2 uses an internal inertia sensor to detect how your vehicle is braking so it can send the right amount of braking power to your trailer. It measures the inertia of your tow vehicle and activates the trailer's brakes to slow at the same rate. The result is uniform braking across your towing setup. No push-pull action - just smooth, proportional braking every time.
90885 Tekonsha Prodigy P-2 Proportional Brake Controller - 1 to 4 Axles
Replaces Tekonsha 90185
Installation Details
California residents: click here
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not arrive in time
Customer Reviews
Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional - 90885
Average Customer Rating: 4.9 out of 5 stars (2635 Customer Reviews)
This proportional brake controller keeps it simple with intuitive controls that are easy to use. Includes a large, digital LED display, 3 boost levels, battery protection, and continuous diagnostics.by: Shaun03/17/2024
I purchased the brake controller and wiring harness from you all and installed it watching the video on your website. I followed the instructions to an absolute T. Got everything ready and tested the product and got an SH error code for the blue brake wire shorting out. I pinned and measured resistance and everything was coming back fine (4+ ohms resistance). I then hooked a power prope to it to find the short along the frame and nothing. I had power from the female connector all the way up to the brake controller. After 4 hours of troubleshooting, I found that the female trailer connector was shorted internally. See the attached picture. The blue and green ring terminals inside of the female trailer connector were touching. Replaced the trailer connector and now all is well.
by: Albert 01/05/2023
I had a Prodigy P2 controller in my last pickup and was really pleased with it. So wanted to install the same thing in my newer truck Everything worked smoothly on installation. Made the necessary adjustments to controls after hooking to the trailer and it works great!
by: Philip03/04/2016
This is the second one I purchased. The first was 10 years ago and installed in my 06 GMC. It has worked flawlessly allowing for safe and smooth stops from normal braking to a few of the panic stops that had to made over the years. The new owner of the truck likes the way it works too. I have multiple trailers and with one initial setup on the lightest trailer was able to tow all of them without changing anything but the boost setting to compensate for the different trailer weights.
When needing for a controller for my 07 Silverado there was no other unit that would fill the bill. This P2 looks the same except for the blue display instead of the red. The install took 20 minutes using the direct fit cable ordered with the controller. Setup was easy as with the first unit. I wanted the placement above the parking brake pedal so the OBD II connecter had to be moved. I did the same with the 06 GMC. It is a comfortable place to reach and it keeps the light away from the passenger's eyes at night.
As good as the Tekonsha controller is it is even a sweeter deal buying it from etrailer. The quick shipping, excellent pricing and knowledgeable staff are second to none in customer service.
Mike L.
2/14/2019
Tekonsha recently updated the Prodigy P2 with an auto-dimming feature for the display so no more worries about being blinded at night.
by: Jim10/30/2015
Installed this in my 2015 Jeep Wrangler Unlimited Sport. I thought that I would add some input on installation that would help others.
I found a way to route the power distribution wires in the frame of the Jeep that did not require the use of a fish tape. If you look at the frame just behind the rear tire you will see a hole in the face of the frame. Start pushing the wire bundle foreword. It will rise up and over the U shaped frame portion of the rear axle and then down along the passenger compartment area. About there, you will be running out of pushing stiffness. Look for the wire bundle to appear at a similar hole in the frame in that area. Grab it a and pull out approximately 4 feet and then push it right back in the same hole going foreword. This time you will look for the wire bundle to appear at again a similar hole just foreword of the driver compartment. Now is the time to grab it and start heading up to the engine compartment outside the frame. Do the same procedure for the wire going aft for the plug end of the installation. For the wires going through the firewall, Jeep has conveniently added a nice foam lined hole to route wires through. You will see this hole position in the attached photo with a green wire coming through. The plastic cover around the steering column pulls down from the top and hinges at the bottom. Remove the metal plate with two bolts to get to the brake switch. Twist and pull the brake switch out foreword and go for the brown stripped wire as your brake circuit. Do order the LONG frame bracket adapter for the switch plug at the rear. To drill the steel for the supplied plug bracket just takes too long. Now that you have it installed you will notice that the power will remain on the unit after you turn the key off. Don't sweat this as it will not stay on long. I doubt a few milliamps draw is going to kill your battery!
Jim
10/29/2016
Working great would recommend to all.
by: Larry L.04/29/2015
The online video showing the installation of the Prodigy P2 trailer brake control into a 2011 Ford Ranger was excellent! It made the installation into my Ranger simple and straight forth.
I have yet to hook up to my travel Trailer and adjust it for brake setting, but all readout displays thus far are as stated in the instructions.
Having previously installed the trailer connector, I did not purchase the installation kit and in retrospect for cost effective and simplicity would recommend anyone to purchase the kit along with the controller.
I believe I am going to be very pleased with this product.
Thank you
Larry L.
4/28/2016
great! thank you for an excellent product!
by: Duane03/14/2024
I have a Tekonsha controller on my 2001 Chevy Silverado and it worked like a charm for over 18 years.I'm sure that the new Prodigy P2 will do the same.
by: Matt02/24/2014
very nice controller, very smooth and you don't have to mount it flat!! e trailer is the best company i ever worked with. they have pics, video, email support(exellent) and just flat out make it easy for you to do it yourself instead of paying some dirt bag $300 to install at your local trailer shop. i also installed kit #ETBC7 and once agian it was awesome. COMPLETE with DETAILED directions. i'm not a mechanic or hack employee at local trailer shop....BUT dealing with etrailer and there parts made my install very easy and CLEAN!!!
Matt
3/5/2015
Your products are awesome. Ive had zero issues with it and 5 of my friends purchased and installed the same set up in there trucks. Thanks again for the great products and excellent support.
by: Carl05/15/2023
the controller has great reviews, I got it because my factory controller wasn't working well with the new camper that has electric/hydraulic brakes and I was experiencing a 5 second lag for the trailer brakes to come on. this controller works better with a 2 to 3 second lag, need to try a couple different combos on settings, have the boost at 3 (per recommendations) and gain at 2.5 and under hard braking it locks up the trailer tires. going to try boost on 2 and bump up the gain and see if that works better.
Katrina B.
5/19/2023
Has doing this corrected the lag?
Carl B.
6/22/2023
That worked a little bit better, it seems as though the brakes are either off or locked up. If I set the gain to more than 3 the trailer locks up the tires, if I adjust the gain down a little then it seems like they don’t come on at all. A very small window. Same with the factory integrated controller.
by: Brad 05/10/2024
Been one year of ownership now and this controller has performed very well. I would by again for sure.
by: Calvin03/14/2024
Great product! Since I pull my goose neck with electric brakes, with my semi truck tractor, it acts as a interface between the air brakes and the electric trailer brakes, and acts as a Johnson bar if I need to get the trailer back under control.
by: Greg08/30/2018
Great product, very easy install especially with the OEM harness. In about an hour had it installed and trailer set up with controller. Thanks,
Greg
Greg H.
8/30/2019
Great!! smooth braking when I haul my tractor and other materials
by: Kevin P.03/16/2011
I didn’t have a good location that was reachable while driving so I mounted the controller on top of the dash. I leveled the bracket with a spacer and ran the harness by an access panel. I used about 70’ of the duplex wire due to running the cable to front and then back to the house batteries inside the coach.
The access panel made it easy to make the connections and run the wires through the firewall.
I mounted the 40 AMP and 30 AMP circuit breakers up front in the main fuse panel box. I drilled a hole through the box and firewall to run the wires from the brake controller to the breaker and to the blue wire for the tow connection at the back of the coach.
I ran the battery connections to my house batteries up front instead of using the engine batteries in the back.
I found the brake connection wire under the coach in front directly below the brake pedal.
I mounted the converter in a beam in the back with lots of zip ties
Scott M.
8/15/2013
For ford ranger 2010 and perhaps other years:Be aware that the video contains the wrong instruction for the 2010 ranger. In wiring the brake light wire, the switch shown being tapped into gives reverse braking sensing, that is, it is 12 when the brake is not applied, but 0v when it is. I found elsewhere that the correct wire is the 2nd connection on the 5 pin plug that rides on the brake itself.This is no comment on the original video, which was excellent, and referred to the 2011 ranger model.
by: Mai N.01/26/2012
Great Brake Controller This was my first time using a brake controller and installing one as well. The directions were easy to follow for both the install and setup.
2012 Ram
William E.
8/19/2013
where did that mounting bracket in this picture come from. Was it already on your 2012 Ram?
Mai N.
8/21/2013
The bracket was already on the Vehicle, its in between the light switch and the parking brake release lever where OEM controller would be if equipped , it requires a little modification to fit.
by: Garry in Indio06/25/2017
Used in conjunction with harness kit for my 2002 tundra, this year has no provisions for towing trailer with electric brakes.
The controler itself has proven itself nicely, with no issues with installation or use, adjust easily.
The mounting location I chose may have some slight interference issues with legs on taller people, but I have not had any @ 5'11". The truck is a midsized so room is more limited. I'm towing a tandem 14' trialer with 4 seat RZR, tracking and stopping is perfect, even under hard breaking.
by: David03/03/2024
The Tekonsha Prodigy P2 Brake Controller arrived on time and is just what I needed. The installation and operating instructions are easy to understand and should make installation a breeze. I'll give an update after I get it installed.
by: Nick04/11/2016
Great Brake Controller, used it with the Universal Install Kit for Brake Controllers and No-Drill Mount Bracket, Short - 18140. It only took me 2.5hrs to have it fully installed in my Jeep Wrangler Unlimited 2013. Videos were great. Also having some 1/4in water tubing helped for phishing wire thru frame.
Wish I had watched the video a couple of times before buying and also purchased the extra wire to go from the battery to the brake controller, but had extra wire from another project that worked.
This brake controller works great as we tow a <3500lbs Travel Trailer with our Jeep.
Comes with a great card that helps with settings, keep it in the glove box for future reference.
by: David W02/16/2019
I recently bought a 2018 Chevy Silverado LTZ. It was equipped with a towing package but no brake controller. Not wanting to alter the interior of the truck too much, I called etrailer for advice. Robert S was very helpful. He suggested the Tekonsha Prodigy P2 brake controller and jumper wire that I was able to hide neatly under the dash using an existing screw. I have been very pleased with etrailer and their suggested product.
by: Mike 02/02/2023
ez hook up and install ez setting of co ntroller
Mike
2/3/2024
woks great installed in 2020 Winnebago ez to adjust braking for my different trailers only negative is the blue power light stays on when i park my coach for long term storage
by: Rob Rod03/28/2014
I installed this model 90885 Prodigy P2 Brake Controller using the ETBC7 Brake Controller Wiring Kit on my 2007 Dodge Nitro. On a scale of 1 to 10, I consider myself about an 8 where it comes to automotive mechanical and electrical work. I also strive to get as close to perfection as possible. To do the job right, it did take some time and it did require paying close attention to the directions for both the wiring kit and the controller. However, the directions were "right on", and all the needed "goodies" to do the job were furnished. My hat is off to ETRAILER for the informative videos they provide and their customer service, which includes very quick shipments of their products.
by: Jake M.06/24/2014
I installed the brake controller a week or two ago in my 2013 GMC Sierra 1500. I had one just like it in an older Duramax that the previous owner installed--I went with the same product. I had the chance to use it this afternoon to pull a few tons of #57 stone. Trailer plus load I figure about 6000 pounds behind the truck. Pictures are attached.
This is the first 1/2 ton truck I've owned in nearly 10 years and worries how it would do with heavier loads. This controller made a world of difference and really maximized the use of my truck. Great product and I highly recommend it to anyone needing a good controller.
by: Thomas08/19/2021
Easy installation on my Ford E-450 Bus! Now I can pull my travel trailer! Thanks!
Thomas
8/19/2022
Still works after a year! It really has done a great job! Thank you!
by: George C.08/22/2018
I purchased this controller for my 2005 Jeep TJ. We're towing a 2014 Forest River FLagstaff MAC and, after doing much research, we decided that this unit (along with the universal installation kit ETBC7) was the right one for us!
Both the controller and install kit contain everything that you'll need for a clean, professional-looking install! The install took around 2 hours (in my driveway) and the controller works flawlessly!
This setup is perfect for a Jeep TJ, the controller fits nicely to the lower left of the steering wheel (out of the way) and the trailer connection is a bolt-on setup that attached to my Reese towing hitch!
The trailer connection (with the install kit) has both a 4-pin connection and a 7-pin connection so there is no need for adapters! It is truly a "plug and play" setup!!
As far as ordering and customer service goes, this was one of the smoothest transactions I've had in quite some time! There are numerous photos and install videos that will guide you through the install.
We'll definitely start with etrailer.com for our next purchase like this!
by: Joseph05/24/2022
Just installed it. My Camper is a restored 1966 Frolic with electric brakes that I am getting checked out tomorrow.
Unit installed fine on my Chevrolet Colorado and the actual installation video with the Colorado was perfect!
Thanks - I will recommend it to a friend who needs to do the same on his Silverado.
Joseph
5/25/2023
Excellent product and the install instructions were perfect on you tube or wherever I found them
by: Clayton 02/12/2024
Very easy to install with the help of a video that shows how to to find the wiring. I could not find the wiring in the cab until finding the video online and because of that help I ordered the brake controller.
by: Dan 06/05/2023
Used it for a season’s worth of towing camper with my 2015 Chevy Traverse LTZ and it works great. Easy to use and effective. With a controller installed there is a big difference in braking; right away you could tell that the camper was braking and taking a lot of load off my Traverse. Good product, and easy to install on my vehicle that has a OEM tow package. Installed nicely right up under the right side of the steering wheel, mounted on the lower plastics.
25
2714
Show More Reviews
See what our Experts say about this Tekonsha Trailer Brake Controller
- Parts Needed to Install 7-Way/4-Way on 2024 Kia Telluride with LED TaillightsI do have a solution for your 2024 Kia Telluride that has the LED taillights that does allow it to have both a 4-way and 7-way plus install a brake controller but it is not with the # TK74CR which does not work for you based on the LED taillights. Instead you would need to go with a 4-way first like with the Curt # C59236 which is a universal install type that requires splicing into the taillights and the brake controller install kit part # ETBC7 which comes with everything needed to convert...
view full answer... - Which is Better the P3 or P2 Prodigy Brake ControllerThe P3 brake controller part # 90195 is functionally the same brake controller as the P2 part # 90885 but comes with more features and a better display screen setup. So if you prefer a simpler screen setup that has a couple letters and dots to indicate connection, status, and error codes the P2 is the way to go. But if you prefer a full display that uses full words and offers ability to save various trailer presets the P3 is the better choice.
view full answer... - Where is Brake Controller Install Harness on 2022 Hyundai PalisadeAccording to Tekonsha who makes the brake controller install harness part # TK78VR that fits your 2022 Hyundai Palisade the brake controller install harness is behind the drivers side kick panel near where you left foot would be if you were driving. There will be a 4-pin connector that mates with the brake controller harness taped to another harness. For a brake controller the P2 part # 90885 is widely considered to be one of the best brake controller due to how well it performs and how...
view full answer... - Which Install Harness For P2 Brake Controller for 2023 Nissan FrontierHey John, yes the Tekonsha brake controller install harness part # 3050-P is correct for your 2023 Nissan Frontier and would be what you would need to install the Prodigy P2 part # 90885. This harness has one end that was designed to fit your truck and the other end for a Tekonsha brake controller like the P2.
view full answer... - Recommended Trailer Brake Controller Harness for a 2023 Jeep Grand CherokeeIn order to install a Curt trailer brake controller like the Curt TriFlex Trailer Brake Controller part # C24VV on a 2023 Jeep Grand Cherokee you'll need the Curt Custom Wiring Adapter for Trailer Brake Controllers part # C51446. In order to install a Tekonsha trailer brake controller like the Tekonsha Prodigy P2 Trailer Brake Controller part # 90885 you'll need the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers part # TK93VR.
view full answer... - Which Diode Tow Bar Lighting Kit for 2022 Jeep Cherokee TrailhawkYou do not need to remove a trailer brake controller from a vehicle like your motorhome when flat towing a vehicle. The brake output circuit of the brake controller won't affect anything so it can be left as-is. The braking systems for towed vehicles do not go through the traditional trailer wiring like for example the Demco SBS DUO part # SM99251 which uses the brake light signal of the towed vehicle to engage it and then it's own inertia sensor to determine how hard it applies brake pedal...
view full answer... - Parts Needed to Install Redarc Tow Pro Elite Brake Controller in 2003 R-Vision Condor MotorhomeIt definitely is the case that any vehicle can have a brake controller installed in it. They are pretty universal in how they install but some vehicles have pre-wiring which makes it a bit easier to install them. So to install a brake controller like the Redarc Tow Pro Elite part # RED44FR you would need to first have a 4-way harness installed like the # 119190KIT. Then you would need to convert it to a 7-way with the kit part # ETBC7 which comes with the wiring needed to wire in the brake...
view full answer... - Can Prodigy P2 Brake Controller Install in 2015 Audi Q5Yes you can install a Prodigy P2 part # 90885 in your 2015 Audi Q5 that currently does not have any trailer wiring. For that you would need to start with a 4-way like the part # C56404 which installs easily and does not require hardwiring to the vehicle. Next you'd just need the part # ETBC7 which comes with everything needed to convert the 4-way to a 7-way and wire in a brake controller.
view full answer... - Parts Needed to Install Tekonsha Brake Controller in 2019 Entegra Odyssey E-450For your 2019 Entegra Odyssey E-450 motorhome the correct install harness for a Tekonsha brake controller like the Primus IQ (we don't have it currently) or the P2 part # 90885 is the part # 22292.
view full answer... - Parts Needed to Install Tekonsha P2 Trailer Brake Controller on a 2000 Ford RangerThe 2000 Ford Ranger does not have a plug or wire bundle under the dash to install a brake controller. You will need to hardwire in the controller. To do this you will need to first add a 4-Way trailer wiring harness, # 118344, unless you already have one. Then you would need a 4 and 7-Way installation kit # ETBC7. I have included some links that explain and show the installation of the ETBC7 kit. The video is on a 2002 Ford Ranger and it will be very similar on your truck.
view full answer... - Which Brake Controller Install Harness Fits 1994 Ford F-350 for Tekonsha Prodigy P2The reason you are having issues installing the Tekonsha Prodigy part # 90885 is because the correct install harness you need for your truck is the part # 3035-P and not the 3036. If you replace the install harness the brake controller will function again.
view full answer... - Brake Controller and 7-Way Recommendation for a 2011 Toyota RAV4 with 4-WayI can almost guarantee your new travel trailer will have a 7-way flat connector. That is the industry standard connector for trailers with brakes. The 7-way round is typically only seen on heavy duty trailers and is basically never used in the recreational towing world. The correct kit you would want would be the part # ETBC7. This comes with everything needed to install a brake controller and route the power wire for the trailer charging circuit. Check out the install video and instructions...
view full answer...
- Parts Needed to Install 7-Way on 2016 Sprinter that Bypasses OEM WiringWe can definitely help Wayne but you'll need to first install a 4-way like with the Curt part # C59236 which is a universal style 4-way that fits your Sprinter. To then convert to a 7-way you'd just need the part # 37185 if all you need is trailer lighting. If you have trailer brakes as well you'd instead of the 37185 need the part # ETBC7 and a brake controller like our very popular P2 part # 90885 and you'd be set.
view full answer... - Parts Needed to Install 7-Way/Brake Controller 2021 Ford Bronco with LED TaillightsWe have a way to install a 7-way on your 2021 Ford Bronco that does not have LED taillights but you'll have to first start with a 4-way like the part # C87BR and then convert it to a 7-way with the part # ETBC7 which also comes with the components needed to hardwire in a brake controller like the Prodigy P2 part # 90885. This is a universal style install that will require hardwiring as we do not have a custom fit wiring solution at this time.
view full answer... - How Does Brake Controller Install in 2022 Ford F-650 I did some digging and I cannot find any info on if there is a brake controller port under the dash of your truck. Doesn't mean there isn't one but I can't find any info on it or any other year F-650 as well. I'd be inclined to hardwire a controller or maybe check with a dealer although I know they aren't super reliable. We can help with a brake controller though like with the P2 part # 90885 you referenced. Since you have a 7-way you would want the Wiring Kit for 2 and 4 Brake Electric...
view full answer... - Adapter to go From 4-Way to 7-Way on 2023 Hyundai PalisadeTo go from a 4-way like the Tekonsha 4-Way part # C43FV to a 7-way on your 2023 Hyundai Palisade you'd need a 7-way adapter part # 37185. Or if you need to install a brake controller too you'd instead want the part # ETBC7 with a controller like the P2 part # 90885. To activate the reverse light circuit the yellow wire would need to run to the reverse light circuit of the vehicle.
view full answer... - Parts Needed To Install Redarc Tow-Pro Brake Controller In a 2019 GMC CanyonThere is not an adapter made for your 2019 GMC Canyon as it does not have a factory connector but instead uses wires that are already terminated in the drivers kick panel. I have linked an installation video for a Tekonsha P2 Brake Controller # 90885 on a 2018 Colorado below that will help you find the wiring. The Redarc Tow-Pro Liberty Brake Controller # RED52VR will include the universal harness needed to install the brake controller. This controller is proportional and works with up...
view full answer... - Which Tekonsha Prodigy Brake Controller for 2011 Toyota Tacoma with Factory Tow PackageThere aren't going to be any real functional differences between the Prodigy P2 # 90885 and the Prodigy P3 # 90195; both provide proportional braking and both have a 3 axis accelerometer so that they can be mounted in a 360 range vertically and still sense the braking in your truck. The Prodigy P3 has a nicer LCD display and it's a bit easier to cycle through the different settings and functions, so I do recommend going with the P3 # 90195. If you're looking for an entry level, no frills...
view full answer... - High Capacity Trailer Hitch, Brake Controller and Wiring Recommendation for 1998 Ford VanFor your 1998 Ford F-350 we have the Curt hitch part # 14053 which has a 10k capacity that would work well. For trailer wiring you will need to start with a 4-way (if you do not have one). For that you would want the # 118344. From there you would need to convert the 4-way to a 7-way so that you can install the brake controller. For that you will want the Brake Controller Install Kit and 7-Way Adapter part # ETBC7. I attached installation instructions and an install video for this product...
view full answer... - Brake Controller and Wiring Recommendation for a 1997 GMC 2500 Towing Dump TrailerNev-R-Adjust brakes are designed to always have the proper adjustment in terms of brake pad clearance to hub drum surface. Manual adjust brakes require you to periodically tighten them up so that they will engage properly when applied properly. Either setup requires a brake controller that can properly apply braking power to the trailer's brakes. The controller has to be adjustable so that you can tailor the proper amount of braking power for your trailer. To convert your 4-way to a 7-way...
view full answer... - Parts Needed to Add 4-Way and 7-Way to 2008 Chevy Express Van 3500We have just what you would need to add both a 4-way and 7-way to your 2008 Chevy Express 3500. The first thing you need is a custom fit 4-way harness with the Curt # 55540 which you will then convert to a 7-way with the part # 37185. This adapter has both a 4-way and a 7-way on it so there would be no need to unplug it to use a 4-way. If the trailer doesn't have brakes this would as far as you would need to go. If the trailer does have brakes you would need to go a slightly different...
view full answer... - Brake Controller and 7-way Trailer Connector Installation on 2017 Chevy TraverseAccording to my research, all 2017 Chevy Traverse models are prewired for a brake controller. If you were wanting to go with the Tekonsha Prodigy P2, part # 90885 (great choice), you'll need the # 3026-P brake controller wiring harness. If your Traverse isn't equipped with the factory 7-way trailer connector at the rear bumper, you can easily add one using the # 118271 wiring harness, which also includes the fuses and relays necessary to activate the tow package wiring. The wiring harness...
view full answer... - Brake Controller and Install Recommendation for a 2015 Mercedes Benz Sprinter and 2005 Honda PilotSince you have a 7-Way in your 2015 Mercedes Sprinter you will only need a few more components to complete a brake controller install on your vehicle. First let's start with a brake controller. I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and how easy it is to setup. Next, for a wiring kit to install the brake controller and the 7-way adapter you would want the Wiring Kit for 2 and 4 Brake Electric...
view full answer... - Parts Needed to Add 7-Way to 2002 Toyota Tundra With 4-WayThere isn't a plug-in 7-way for your 2002 Toyota Tundra but since you already have a 4-way you can add a 7-way by using the following: - Universal Installation Kit for Trailer Brake Controller # ETBC7 You'll plug your 4-way into the 7-way that comes with the # ETBC7, which also gives you the wiring, circuit breakers, and rest of the hardware needed for installation of a brake controller like the Prodigy P2 # 90885. I have added a link below to a help article which details the install...
view full answer...
Do you have a question about this Trailer Brake Controller?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Rick A
Test Fit:
Shane T
Test Fit:
Randy B
Test Fit:
Joe B
Test Fit:
Jared G
Test Fit:
Andrew S
Test Fit:
Brent H
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
Conner L
Test Fit:
David F
Test Fit:
Ryan G
Test Fit:
Adam E
Test Fit:
Clayton O
Test Fit:
Michael H
Test Fit:
Bradley B
Test Fit:
Ian F
Expert Research:
Jackie C
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Brandon M
Expert Research:
Adam R
Expert Research:
Lori W
Expert Research:
Rachael H
Expert Research:
Jeffrey L
Expert Research:
Victoria B
Video Edited:
Zack K
Video Edited:
Andrew K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Patrick B
Video Edited:
Andrew L
Video Edited:
Mike H
Video Edited:
Dustin K
Video Edited:
Sue W
Video Edited:
Chris R
Video Edited:
Jonathan Y
Written by:
Tricia G
Updated by:
Adele M
Updated by:
Kathleen M
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Isabelle B
Updated by:
Amanda K
Video by:
Alan C
Video by:
Zach D
Video by:
Amber S
Video by:
Michael B
Video by:
Jacob H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Albert
1/6/2024
It is working great!! Wouldn’t be without it!