Replacement Mounting Bracket for Tekonsha Prodigy and P2
(42 reviews)
Price: $9.70
In Stock
Replacement Mounting Bracket for Tekonsha Prodigy and P2
Item # P7685
Retail:$22.53
Our Price: $9.70
You Save: 57%
In Stock
- All Info
- Reviews (42)
- Q & A (0)
- Videos (1)
- Photos
Tekonsha Accessories and Parts - P7685
- Trailer Brake Controller
- Mounting Hardware
- Brackets
- Tekonsha
- Fits Tekonsha Prodigy and P2 Brake Controllers
- Kit includes:
- Bracket
- (4) mounting screws
- (2) 12-10 gauge butt connectors
- (2) 16-14 gauge butt connectors
7685 Replacement Mounting Bracket for Tekonsha Prodigy and P2
Video of Replacement Mounting Bracket for Tekonsha Prodigy and P2
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Tekonsha Brake Controller P7685 Review
Today, we're going to review part number P7685. This is the Tekonsha replacement mounting bracket for the Tekonsha Prodigy brake controllers. This part is designed to fit the Tekonsha Prodigy, the Prodigy P2, and the Prodigy P3 brake controllers. This can be used as a replacement part. It usually will come with those brake controllers. If you happen to lose one, you can buy this as a replacement part. What you can also do is you can buy this as an extra so you can put this in another vehicle and make it easy just to transfer your brake controller from one to the other. This kit does include this metal bracket.
It does include the mounting screws. There is four of them; two for mounting the bracket to the brake controller itself and two for installing the mounting bracket onto your vehicle. It also comes with four butt connectors. Two of them are the size ten gauge to twelve gauge and the other two are size fourteen gauge to sixteen gauge. That should do it for the review on part number P7685, the Tekonsha replacement mounting bracket for the Tekonsha Prodigy brake controllers. .
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Arrived Damaged
Customer Reviews
Replacement Mounting Bracket for Tekonsha Prodigy and P2 - P7685
Average Customer Rating: 4.9 out of 5 stars (42 Customer Reviews)
by: Doug W.09/24/2013
I needed the standard mounting bracket to mount a brake controller in my 2012 Expedition. The product was delivered in a couple of days, and was exactly as described. I am very impressed with etrailer.com, and the ease of using the website to look up items and place an order. I will definitely be ordering from them again.
by: Denny M.04/09/2016
I bought a Tekonsha Prodigy controller from E-Trailer, a trailer hitch and a sway bar attachment. I liked the how-to videos, the good prices and quick shipping.
It's all good at E-Trailer with me!!
by: Duncan05/29/2016
Bought a brake controller harness and connector kit for my 2015 Xterra. Both arrived quickly, and more importantly, the harness fit perfectly to the connector in the Xterra, saving me the hassle of custom wiring. Really appreciate that!
by: james12/23/2018
brake controller, have not let put it in, because it is to cold, Adam was excellent in trying to get me the right parts that was missing for the order, he had to try three time to get right part,that ok because he got the part good job Adam, I would return and order for adam again thankyou.
by: Frank W.05/13/2015
Direct replacement for the original that came with the brake controller. If you need a new bracket for your P1 or P2 this is the one go get.
by: David C.08/01/2016
Not quite the bracket I was looking for as I use the same controller in 2 vehicles and wanted the plastic bracket that the P2 just slides and clicks in, but I did a phone order and didn't have the part number. This is still easy enough to use and install. Does the job it is designed to do.
by: AJ09/28/2014
Harness made it a breeze to install the Prodigy 2 controller in my Ram 1500 . Tip: a portion of the lower dash pops off with the removal of two screws and makes it a LOT easier to see what you are doing.
by: Ned B11/25/2013
Not much could go wrong; its only a mounting bracket. Fits perfect. Glad the screws were included as I had lost the old ones. Most pleased with the speed of processing and delivery. Was actually here three days before the expected date.
by: Tom A02/22/2020
Simple to install and still holds my break controller after 1 year
by: Earl08/15/2011
Ordered online. Product was delivered quickly. Used this to install a Prodigy brake control in our 2008 Land Rover LR3. Thank you!
by: Kenneth10/05/2018
Good quality bracket for Prodigy brake controller.
by: Stan C08/20/2014
I was very happy with the experience, great service, very quick turn around time and the products I ordered were exactly what was represented and what I needed. Will be a return customer.
by: Ken04/23/2018
Excellent service!!! Products I ordered were exactly what I received!! These guys know what they are doing! Easy ordering process! Highly recommend etrailer!!
by: Stanley S.01/27/2014
Thank you for coming out with this product, simple and logic when putting together! Didn't take me two minutes ... Literally!
by: Rob01/02/2019
Cant really comment on this product as I didn't need this for my application, but customer service was excellent.
by: AJ09/28/2014
I mistakingly left my old bracket in the vehicle when I traded it in. Rather than rig it this inexpensive bracket allowed an easy and clean looking install.
by: Matt S06/03/2016
Works as expected. If you need another bracket for another vehicle or lost or broke the one that came with it this works great.
by: Betty 01/23/2021
Great fit to my brake control.
by: Cliff M.10/14/2015
Product was exactly what I needed and shipping was lightning fast!
by: Jon P.01/23/2015
Exactly what I needed and expected. Delivery was as expected... You will get what you expect from this retailer!
by: Tony J09/25/2015
delivery was very fast . The product fit perfectly and the kit has everything that is needed for the Job!
by: Jack C.05/07/2014
Exactly what I needed for a new tow vehicle. Good price and fast shipping.
by: Stephen05/23/2016
great product very helpful staff
by: Samuel09/05/2018
Exactly what I needed. Straight forward and easy.
by: TB03/10/2017
Great bracket/holder
25
42
Show More Reviews
See what our Experts say about this Tekonsha Accessories and Parts
- Do Tekonsha Prodigy 90185 and Prodigy P2 90885 Use Same Connector AdapterYes, if you're trying to replace your original Tekonsha Prodigy brake controller (obsolete part number 90185), the Prodigy P2 # 90885 will plug right into the same 4-pin wiring adapter, like # 20127. Both use mounting bracket # P7685 and pocket # 7686, so you should be able to slide the P2 right in place of your original Prodigy controller!
view full answer...
- Metal Mounting Bracket for P3 Brake Controller # 90195For a metal mounting bracket that can be used with the P3 brake controller # 90195 you can use replacement bracket # 2178. Or you can use Replacement Mounting Bracket Kit # TK5906. If you need just the small metal bracket that attaches to the top of the plastic bracket it is # TK5904.
view full answer... - Brake Controller Installation Harness Recommendation for a 2014 Ram 1500What you will need to install your Prodigy P2 Brake Controller part # 90885 in your 2014 Dodge Ram 1500 is the install harness part # 3023-P. This will plug into the brake controller and the other end will plug into the port on your Ram. I attached an install video for you to check out. The plug you used on your Durango would not work on your Ram. For a new install bracket you would want the part # P7685.
view full answer... - Wiring Pigtail Adapter To Install a Tekonsha Prodigy P2 Trailer Brake Controller In 1999 Ford F-250 To install your Tekonsha Prodigy P2 Trailer Brake Controller # 90885 on your 1999 Ford F-250 Super Duty you need the Tekonsha Plug-In Wiring Adapter # 3035-P. This will connect to the factory connector on your truck. I have linked an installation video below as the factory connector is often difficult to find on your truck. We also have the Replacement Mounting Bracket # P7685 and Mounting Pocket # 7686 if your original bracket was left in the other truck or damaged.
view full answer... - How to Install a Prodigy P2 Brake Controller in a 2008 Toyota TundraTo install your Prodigy P2 Brake Controller part # 90885 in your 2008 Toyota Tundra all you would need is the correct install harness, part # 3040-P and the bracket # P7685. C stands for connected to trailer and N.C. stands for not connected. If your controller is flashing between those two messages then most likely you have an intermittent connection on your brake output circuit due to corrosion on your trailer connecter. Hit the pins of the connector with some fine grit sandpaper.
view full answer... - What is Needed to Transfer Prodigy P2 # 90885 Between 2008 Silverado and 2011 GMC Yukon XLTo easily transfer a Prodigy P2 Brake Controller between two vehicles you will need a second mount, either metal bracket part # P7685 or plastic pocket # 7686. Both options include the required mounting hardware. I have linked representative installation videos for this brake controller in both a Silverado and a Yukon XL. You will also need to equip each vehicle with a Pigtail Wiring Harness # 7894 to allow the controller to simply plug in for use. A Prodigy P2 comes equipped with one...
view full answer... - Brake Controller Wiring Harness for Prodigy Brake Controller Installed on 2016 Toyota TacomaAn 8 year old Prodigy would most likely have the 4 loose wires exiting the rear of the controller, in which case you'd use the # 3031-S wiring harness. The controller would wire to the harness color for color. If your Prodigy has the plug in the rear of it, you'd use the # 3031-P wiring harness. If you needed another mounting bracket, we offer a replacement, part # P7685 or the replacement mounting pocket, part # 7686.
view full answer... - Can a Tekonsha Prodigy P2 Be Installed on a 2019 Audi Q5 with Tow PackageYes, you can reuse the Tekonsha Prodigy P2 Trailer Brake Controller part # 90885 on your 2019 Audi Q5. However, you are going to need a few parts: Replacement Mounting Bracket for Tekonsha Prodigy and P2 part # P7685, Mounting Pocket for Tekonsha Prodigy Proportional Brake Controller part # 7686, and the Pigtail Wiring Harness for Tekonsha and Draw-Tite Brake Controllers part # 7894. In addition to these three parts you will also need a factory brake controller pigtail that must be obtained...
view full answer... - Mounting Bracket and Install Harness Recommendation for Prodigy P2 Brake ControllerFor the P2 brake controller # 90885 you can use mounting pocket # 7686 or bracket # P7685 depending on your mounting needs. We also have the install harness part # 7894 that you mentioned as well.
view full answer... - Brake Controller Plug For a 2010 Toyota Tundra and 2018 Ford F-150 Using the Tekonsha Prodigy P2I am a little confused by your question but we do have brake controller adapter harnesses for both a 2010 Toyota Tundra and a 2018 Ford F-150. If you have the Tekonsha Prodigy P2 Trailer Brake Controller part # 90885 then you will use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers part # 3040-P for your Tundra and the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers part # 22292 for your F-150. There is not a brake controller adapter harness that fits both...
view full answer... - Replacement Brake Controller Install Bracket and Harness for Prodigy P2 in 2016 Jeep Grand CherokeeThe replacement metal mounting bracket for the P2 part # 90885 is the part # P7685. For a permanent installation I would recommend you use the metal bracket like what you see in the video that you mentioned which I have attached. Especially since the area that is used in the video is thinner like what would work best with the metal bracket. The correct install harness for this controller in your 2016 Grand Cherokee is the part # TK93VR also.
view full answer... - Install Harness for Prodigy P2 Brake Controller for 2021 Ford F-150The correct mounting harness for the Prodigy P2 part # 90885 for your 2021 Ford F-150 is the part # 22292. Your vehicle does not require any special mounting brackets beyond what the controller came with. For a replacement bracket you'd want the part # P7685.
view full answer... - Parts Needed to Use Prodigy P2 Brake Controller in 2004 Toyota Tundra and 2011 Chevrolet SilveradoIn the 2004 Toyota Tundra it is that easy since you have the tow package. You'll need the Prodigy P2 # 90885 and the wiring harness # 3040-P that plugs into the connector under the dash. I've linked a video of the install. The 2011 Chevrolet Silverado 1500 requires a little more but still not too much. Whether you have the tow package or not there isn't a connector under the dash. But the wiring is already there to hardwire in the P2. Use a circuit tester, # PTW2993, to test each...
view full answer... - Replacement Mounting Bracket for a Tekonsha Prodigy Brake ControllersNo need for measurements. Replacement mounting bracket # P7685 is the correct replacement for the the Prodigy and Prodigy P2 (# 90885) brake controllers. It is the exact same bracket that comes with the controllers.
view full answer... - Is There A Plug And Play Brake Controller Adapter From Tekonsha For A 2024 GMC Sierra 2500HDWe have just the thing. You can use the adapter # 3064-P to connect your Prodigy P2 # 90885 to the factory brake control harness. Assuming that your 2024 GMC 2500HD does already have a factory 7 way trailer plug on the back, you will have a connector under the dash that you can plug right in to. Simply mount the controller, plug in and you are good to go. You will not have to run any additional wires. We do carry a replacement mounting bracket # P7685 if you are in need.
view full answer... - Is Wiring Harness Available for 2013 Chevy Silverado Using Prodigy P2 Brake Controller?If you plan on using your Prodigy P2 # 90885 in a 2013 Chevy Silverado, you would need to use the replacement Pigtail Wiring Harness # 7894 to connect it to your truck. From there you would be able to mount it with Mounting Pocket # 7686, or Replacement Mounting Bracket # P7685. I've added links to video reviews of these items for you to take a look at.
view full answer... - Recommended Wiring Adapter For A Tekonsha Prodigy 2 Controller For A 2005 Lexus GX 470The Tekonsha Prodigy P2 # TK90160 is confirmed to fit your 2005 Lexus GX 470. You need The Tekonsha harness # 3040-p and The Replacement Mounting Bracket for Tekonsha Prodigy and P2 # P7685. I attached a review video link below.
view full answer... - How To Transfer the Tekonsha Prodigy P2 From a 2001 Ford F-150 to a 2018 Ford F-150Yes, you can install the Tekonsha Prodigy P2 Trailer Brake Controller part # 90885 from your 2001 Ford F-150 on your 2018 Ford F-150 you just need an adapter, the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers part # 22292.If you didn't grab the bracket from the old vehicle then you will also need the Replacement Mounting Bracket for Tekonsha Prodigy and P2 part # P7685.
view full answer... - Parts Needed To Install Tekonsha Prodigy P2 Trailer Brake Controller in 2023 Jeep Grand WagoneerThe Plug-In Wiring Adapter # TK93VR will allow you to connect your Tekonsha Prodigy P2 Trailer Brake Controller # 90885 to your 2023 Jeep Grand Wagoneer. We do have the Replacement Mounts # 7686 & # P7685 should you decide to leave the mounting bracket in your Escalade or they become lost or damaged. The electrical connection for the controller can be hard to find under the dash. I have included a installation video we did for the P3 # 90195 near the bottom of the page you can watch to...
view full answer... - Replacement Mounting Bracket for Prodigy Brake ControllerThe correct replacement mounting bracket you need for your Prodigy brake controller part # 90185 is the part # P7685.
view full answer... - Wiring Harness and Mounting Bracket for a Prodigy Brake Controller and a 2005 Chevrolet SuburbanThe wiring harness that you will want for your Prodigy brake controller and your 2005 Chevrolet Suburban Z71 is part # 3015-P. For a mounting bracket, you can use part # P7685. You can also use part # 7686, if you plan on removing the brake controller from the truck frequently. I have attached an installation video of the Prodigy on a 2004 Suburban for you to check out. The installation will be the same on your 2005 model. The factory brake controller port is located under the driver's...
view full answer... - Recommended Wiring for 2004 Toyota 4Runner with Prodigy P2 Brake ControllerIf you have the factory 7-way in your 2004 Toyota 4Runner, then you will just need the wiring adapter # 3040-P to connect your Prodigy P2 # 90885. You will not need to purchase another brake controller as that can transfer easily between vehicles. If you do not have the factory 7-way, then you will need the wiring kit # ETBC7 and plug in harness # 20127 to make your brake controller compatible through hardwiring it. You may also want the Mounting Pocket for Tekonsha Prodigy Proportional...
view full answer... - Harness for Tekonsha Prodigy P2 or P3 Brake Controller for 2019 Chrysler Pacifica With Factory 7-WayYou can absolutely just get the wiring harness for the Tekonsha Prodigy, Prodigy P2 # 90885 or P3 # 90195 brake controller to install it in your 2019 Chrysler Pacifica with the factory 7-way. The only thing you will need is the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers # TK93VR. Since you are transferring the brake controller, you may need a new mount as well. For that we have the Replacement Mounting Bracket for Tekonsha Prodigy and P2 # P7685, or the Replacement...
view full answer... - Brake Controller Recommendation for a 2003 Monaco Knight Motor HomeActually, you can use the P2 brake controller, # 90885, you have and switch it back and forth between the RV and the QX56. You will just need a separate mount, # P7685, and a separate wiring harness. The wiring harness is going to depend on how the brake controller will be installed on your RV. If your RV was built on a Ford F-53 chassis then you can use harness # 3035-P. The port to plug this in is located behind the instrument cluster, see picture. If it is not an F-53 chassis and/or...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Michael H
Expert Research:
John H
Updated by:
Laura H
Updated by:
Wilson B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.