Brake Controller and 7-way Trailer Connector Installation on 2017 Chevy Traverse

Question

Question:

Hello, I have a 2017 traverse v6 but I don’t believe it has the tow package due to it was the lowest trim model and I need to install a hitch. What would be the best/easiest brake controller to install? Are they plug and play? I will be towing a dual axle camper that weighs 4150lbs. Thank you.

asked by: Travis

1

Helpful Expert Reply:

According to my research, all 2017 Chevy Traverse models are prewired for a brake controller. If you were wanting to go with the Tekonsha Prodigy P2, part # 90885 (great choice), you'll need the # 3026-P brake controller wiring harness. If your Traverse isn't equipped with the factory 7-way trailer connector at the rear bumper, you can easily add one using the # 118271 wiring harness, which also includes the fuses and relays necessary to activate the tow package wiring. The wiring harness doesn't include mounting brackets, so if you'd like to mount the trailer connector to the hitch crossbar, you'll need a # 18136 No-Drill bracket and a # PK12711U bracket to attach the 7-way to the no-drill bracket.

I've linked to install videos for the 7-way as well as to a brake controller install on a 2015 Traverse. The video shows a different model controller being installed, but the procedure would be the same with the Prodigy P2 on your 2017 Traverse.

If you haven't yet chosen a hitch, I'd recommend the Curt Class III, part # 13424. For a ball mount, use # D-4, Hitch Pin and Clip, # PC3, and # 19260 for a 1-7/8 ball or # 63845 for a 2 inch ball.

expert reply by: Mike L

1

Answer 1

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

The Redarc Tow-Pro Liberty #RED24FR is the way to go over the Elite #RED44FR as you get the nicer functions of the Elite at a lower price. The Elite has the ability to be the more preferred proportional style of controller as well as a time-delayed…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Either way is correct. It depends on if you want to keep the semi-style 7-Way (if you need to tow that type of trailer) or if you will never be towing a semi-trailer. If you need to keep the 7-Way semi active on the truck, then you would need to make…

view full answer...

Answer 6

The trailer brakes work on a separate circuit than the lights. You have a couple of options to control the electric brakes on the trailer. One option is to use an air over electric brake control, #HA100400C. This unit connects to the air brakes on…

view full answer...

Answer 7

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

view full answer...

Answer 8

Hey Donald, the best Blue Ox weight distribution would be the pat #BXW0550 as it has a perfect tongue weight range for your 450 lb tongue weight trailer.

view full answer...

Answer 9

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 10

For your 2024 Hyunda Santa Cruz we have the Curt 7-way kit part #C68JR that is a confirmed fit. This installs by plugging into a factory wiring connector on your vehicle which means a really easy install that doesn't require any splicing.

view full answer...

Answer 11

You're right, the mounting bracket is unique (in a good way) for the Curt TriFlex NEXT Trailer Brake Controller #C24VV. The bracket is smaller and all you do is put the included adhesive tape on the bracket and stick it wherever you like under…

view full answer...

Answer 12

On a 7 pin round which is the common connection on a semi trailer, the clearance/marker lights are at the 10 o clock position when you look at the trailer wiring connection. When looking at the connector on the back of the truck, that will put the…

view full answer...

Brake Controller and 7-way Trailer Connector Installation on 2017 Chevy Traverse

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching