Roadmaster Even Brake Portable Flat Tow Brake System - Proportional
Item # RM-9400
Our Price: $1,463.73
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (47)
- Q & A (0)
- Photos
2010 Chevrolet Silverado - Roadmaster Even Brake Portable Flat Tow Brake System - Proportional
- Proportional System
- Air Brakes
- Air Over Hydraulic Brakes
- Hydraulic Brakes
- Brake Systems
- Portable System
- Roadmaster
- Not Power Assist Brake Compatible
Portable unit gets you smooth braking without a complex installation. Measures the RV's braking and applies your towed car's brakes with the same intensity, at the same time. Easy to swap between multiple cars. Includes LCD braking monitor.
Features:
- Applies towed vehicle's brakes proportionally for comfortable braking
- Measures motorhome's braking and activates car's brakes with same intensity
- Prevents false braking with terrain-sensing technology
- Lets you adjust force and sensitivity for smooth braking
- Swaps easily between multiple towed vehicles
- Requires a second vehicle kit (RM-98400 - sold separately) for each alternate car
- Adjusts to fit almost any car
- Adjustable feet: sits level for optimal performance
- Adjustable clamp: fits around almost any brake pedal
- Adjustable seat pad: rises/lowers to brace firmly against seat
- Monitors braking with wireless receiver - plugs into 12V accessory outlet in cab of RV
- 3 LED lights keep you updated on what the system is doing at a glance
- LCD screen displays detailed messages, helping you troubleshoot
- Audio alarms alert you to problems immediately
- Transmitter connects to brake light switch to ensure accurate reading
- Protects against battery drain
- Monitor alerts you to low battery level
- Sleep mode turns system off if battery gets too low, while retaining emergency braking power
- Includes breakaway system
- Meets the braking requirements of both the US and Canada
- Made in the USA
Specs:
- Dimensions: 12" tall x 11-1/4" wide x 16" long
- Voltage: 12 volts DC
- Requires 15 amps of power to function properly
- Length of power cord: 42"
- Max amperage draw: 10.8 amps
- Idle amperage draw: 47 mA
- Weight: 17 lbs
- Limited lifetime warranty
Note: Cannot be used with hybrids or other cars with continuous-power-assist brakes.
Do I Need a Braking System for Flat Towing?
A braking system is a must when towing a vehicle behind your motorhome. Without it, the weight of the towed car can create a safety hazard, strain your RV's brakes, and affect the warranty of both your car and motorhome. Most states legally require a supplemental braking system, so if you don't use one and you end up in an accident (which is more likely since your RV takes longer to come to a full stop), your insurance and liability headache just doubled. You also won't have any breakaway system; if there's an accidental disconnect, there's nothing to bring your car to a stop.
Pros of a Portable System
First, this system is great for DIYers, since you can get the basic installation done yourself. It's really only the braking monitor that will need to be wired and installed, and that's it.
Second, it offers you a lot of flexibility. It's easy to move from one toad (towed vehicle) to another - or, if you think you'll swap out your current vehicle for another one down the road, you can easily set the Even Brake up in your new toad.
How Does the Even Brake Work?
The Roadmaster Even Brake uses a built-in inertia sensor to detect when your flat tow setup begins to slow down as you apply the brakes in your motorhome. The moment the system recognizes the change in momentum, the actuator will press down the brake pedal of your toad proportionally: at the same time, with the same intensity. Meanwhile, the terrain-sensing technology keeps the unit from activating when you're just going over bumps in the road, so it doesn't brake when it doesn't need to.
Setting Up the Roadmaster Even Brake
You'll be setting up this portable unit in your toad every time you flat tow, so it's designed to be easy to do. And because it's so adjustable, it fits in almost any vehicle on the market.
Step 1: Position the Even Brake
Move the driver's seat all the way back and place the Even Brake on the floorboard. It's important that the unit sits as level as possible so the actuator has enough leverage to effectively push down the brake pedal, so adjust the feet of the unit to suit your floorboard if need be. Twist the feet by hand to get them to the height you want and then tighten the locknuts with a wrench.
Note: If your vehicle has a rubber floor mat, remove it before installation to keep the Even Brake from shifting out of position.
Step 2: Attach the brake pedal clamp
Next you need to get the clamp securely attached to the brake pedal. Before you do anything else, make sure that all the air in the cylinder is released. Any excess air will keep it from extending properly. Hold down the air release button while you pull the clamp forward and extend the shaft, then release.
You'll pull back on the spring post to widen the jaws of the clamp. Make sure that the arrow is pointing up and the jaws close snugly around the pedal. Insert the pin into the slotted arm of the spring post to hold it in place.
Note: Some compact cars have pedals that are too small to use with the normal clamp. Use RM-9329-VW (sold separately) instead. Fits brake pedals up to 2" wide and 3" tall.
Now slide the driver's seat forward again so that it just touches the handle/seat pad. The handle should sit level with the part of the seat that you want it to push against. Adjust if needed.
Step 3: Plug in and power up
Plug the unit into the car's 12-volt outlet and plug the transmitter of the braking monitor into the unit. Press the Test button to boot up the unit and prepare it for flat towing. The Even Brake will run a self-diagnostic cycle and test out the brake clamp to make sure that everything's working properly. (If it's not, the LCD monitor will help you troubleshoot the problem.)
Once it gives you the green light, you're ready to go!
Braking Force and Sensitivity
The first time you set up the Even Brake, you'll need to program your Force and Sensitivity settings. Once you've set them, you won't need to change them unless you get a different vehicle or want to tinker with how your braking feels.
The Force setting will determine how hard the unit presses your brake pedal. There are 3 levels: less, average, and more. A heavier vehicle will need more, while a small vehicle will need less. You can always adjust the setting up or down if it doesn't feel right.
The Sensitivity setting is very similar, with 3 levels of less, average, and more. This setting determines when the unit will activate. On the less setting, the unit will only activate when the motorhome brakes forcefully. On the more setting, it will activate when there's only a light tap on the brakes.
Troubleshoot with Digital Braking Monitor
Included with the Even Brake is a digital monitor for safety and peace of mind. This monitor, plugged into the 12V outlet in your motorhome and mounted on the dashboard, is a simple and convenient way to keep tabs on whether the system is working properly or if something is going wrong.
The transmitter in the toad connects directly to your car's brake light switch, so it's not just checking that the system is activating, but that the toad is actually braking. If the Even Brake does shift during travel, it could apply the brakes continuously or not at all. This could happen with any portable system, but with this handy monitor, you'll know right away if something goes wrong.
The Even Brake monitor uses LED lights, an LCD text display, and audible alerts to keep you fully informed. The 3 LEDs - green, yellow, and red - are a quick and easy way to see that the Even Brake is functioning and what it is doing. If you need more detail, the LCD display gives you full messages to help you troubleshoot.
The audible alert only sounds in the event of an emergency. This way you'll know right away if, for example, a breakaway has occurred, even if you aren't watching the monitor.
Breakaway System
The Even Brake also comes with a breakaway switch, an absolute must for safe flat towing. If there's ever an emergency situation where your toad becomes detached from the motorhome, the breakaway switch will immediately activate the brakes and bring the vehicle to a stop.
This switch mounts to the front of your toad and plugs into the braking monitor transmitter. It includes a pin that connects to your RV's hitch receiver with a breakaway cable. If the toad and RV become disconnected, the cable will pull the pin out of the switch and trigger the braking system. A reserve air supply in the operating unit will then apply the brakes in the car.
9400 Road Master Even Brake Supplemental Braking System - Proportional
Installation Details
Alternate Instructions
Customer Satisfaction Score:
89% were satisfied with this product
11% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Defective
Customer Reviews
Roadmaster Even Brake Portable Flat Tow Brake System - Proportional - RM-9400
Average Customer Rating: 4.6 out of 5 stars (47 Customer Reviews)
Portable unit gets you smooth braking without a complex installation. Measures the RV's braking and applies your towed car's brakes with the same intensity, at the same time. Easy to swap between multiple cars. Includes LCD braking monitor.by: Luke04/10/2024
1996 Ford F-250 and F-350
So I never used mine. This is for those trying to decide if they need one. I tow an F250 with a 43’ tag axle, with an 8.9l Cummings. Yes I can feel the truck back there but I have never had the need for additional braking. Crossing the Snoqualmie pass on I-90 or driving through the cascades, I have no problems slowing with the engine brake. I have a big rig and tow a big truck so if this is your set up I’d give it a shot before committing to such an expensive item that I never use. I’m sure smaller rigs pulling larger trucks will benefit from a device like this.
by: Robert 10/09/2022
2022 Jeep Cherokee
Ordering was easy. Delivered very promptly. Actually cheaper then what the manufacturer sells it for. Live near manufacturer and having them install all my flat towing components this month. Great service Etrailer!!
by: Harold02/14/2024
Very happy I received it, normal great service from etrailer but had a shipping issue, (shipper's fault). I will always go through etrailer first for anything RV related. I will be back!
by: John K05/02/2020
I ordered a complete towing package from etrailer for my Sprinter RV to tow a Hyundai Accent. The Roadmaster Even Brake was the supplemental braking system that etrailer recommended. The system has worked flawlessly. After the original set-up, it literally takes all but 2 minutes to either put in or take out and stores neatly in the trunk of my Accent when not in use. The instructions for use and adjustment are clear and easy to understand. After a year of use, I couldn't be happier with this system.
John K.
5/3/2021
Im happy to say that my towing package from etrailer is as reliable as they day we bought it and it has towed our little car around from coast to coast more times than I care to remember. At this point, I can hook up our car in my sleep! Thanks.
by: Arizona Slim03/21/2019
2017 Toyota Tacoma
Very nice piece of equipment. Installation was no problem. The instructions are clear and easy to follow. It fits nicely in 2017 Tacoma. Initial drive showed a noticeable improvement in stopping smoothness without adjusting any of the settings from normal yet.
by: Darren03/22/2020
Very easy to install with the supplied directions als o watched video of install on etrailer.com. Haven’t used it yet but very pleased with toehold system.
by: James 09/14/2023
Jeep
Great for towing jeep behind the truck
by: James 01/10/2024
Very fast shipping
by: Ronald 04/14/2023
Great customer service from William and the team at E Trailer. Kept me updated at all times throughout the process.
by: Tom in SF Bay Area02/15/2015
2015 Jeep Cherokee
Great product, but when ordering you need to request any updated supplemental technicians bulletins for your specific vehicle (my vehicle = 2015 Jeep Cherokee Trailhawk). Installation using the included product installation instructions exactly (not being told that there were updated technicians bulletins) caused the vehicle battery to run down to the point where I couldn't operate any vehicle electronics or start the vehicle. A call e-Trailer provided updated information. The manufacturer (Roadmaster) was aware of the issue and provided solution instructions. Had this been offered when ordered, I would have avoided having to deal with a dead battery and extra installation time. When installed using the updated information, the product works great.
by: Greg08/16/2022
etrailer never contacted me because of delay. etrailer forwarded order to supplier. Customer service for etrailer is so bad. It wasn't until I contacted etrailer some 5-6 months later to get refund. This could have been a better experience had etrailer recommended a replacement product. etrailer is now my last choice!
Last person was very rude that I spoke to about this product
by: Daniel06/25/2021
The system is quickly installed and works extremely well. I had one emergency stop and it reduced the time to stop incredibly.
by: Jean-luc02/03/2019
2012 Fiat 500
Very good product
Easy to install and to use
Very good service from etrailer
Jean-luc
2/4/2020
Very good
by: David 09/28/2022
I've had an Even Brake for over 20 years and love it. The old unit wore out. This new unit was an exact fit and appears to have a few more features.
by: Lorraine01/04/2023
I have a lot of trouble getting this wo rking
Jenny N.
1/5/2023
That is definitely not what we want to hear about this braking system. It is designed to work smoothly. Can you tell me more about your experience with it. I am happy to help.
by: Gary11/27/2021
Installation instructions were complete and helpful. No problem one year later.
by: Tom06/24/2019
Will at e-trailer did a great job of answering very detailed Qs and helping with this order. Arrived quicker than expected. Very happy with the CS at e-trailer as well as this product,.
by: Steve B12/24/2011
2012 Chevrolet Equinox
It is pretty easy to attach to the vehicle and remove once you get to your destination. It is pretty light so it doesn't take much to move it.
by: Larry08/08/2019
Great product, great delivery, great service. I wish the RV dealers had as much integrity as etrailer!
by: Theodore01/19/2018
Wish I had brought it sooner
Theodore
1/19/2019
Good no complaints works well
by: Craig 08/16/2022
It's a little clunky to store when not in use but works as advertised.
by: Nelson10/02/2022
I received all my order parts together nothing short able to continue my project.
by: Albert B.06/25/2019
Easy to use and set up. I'm glad I choose this system. I haven't had any problems with RM-9400, great system
by: Edward 01/15/2020
The unit is being installed Tue sday, january 21st. I checked the box, everything seems to be in order and was packed securely. At this point in time extremely happy with the service. The unit was delivered one day earlier than anticipated. Great job.
by: Larry W06/12/2020
It works great and is real easy to inst all.
25
47
Show More Reviews
See what our Experts say about this Roadmaster Tow Bar Braking Systems
- What Color is Stoplight Circuit Switch of 2018 Lincoln MKXI was able to determine that the stop light circuit of the brake switch wiring on your 2018 Lincoln MKX is purple and white. On newer vehicles the stop light switch might be up higher under the dash but if you trace the pedal up you will eventually see a switch setup that you can wire to the part # RM-88400.
view full answer... - Parts Needed To Flat-Tow a 2008 Ford Ranger SportIn order to flat-tow a 2008 Ford Ranger Sport you'll need a tow bar, base plates, safety cables, braking system, and wiring. I have attached for you below my recommendation on each of these components. Roadmaster Crossbar-Style Base Plate Kit part # 477-1 Roadmaster Falcon All Terrain, Non-Binding Tow Bar part # RM-522 RoadMaster 68" Single Hook, Coiled Safety Cables part # RM-643 Roadmaster Even Brake Portable Supplemental Braking System part # RM-9400 Hopkins Custom Tail Light Wiring...
view full answer... - Will the Roadmaster Even Brake Work With my 2013 Mini Cooper S ConvertibleThe 2013 Mini Cooper does have power assist brakes or commonly know as power brakes. The Roadmaster Even Brake Portable Supplemental Braking System part # RM-9400 is compatible with your 2013 Mini Cooper and will work out great for you. The power assist on your Cooper will have no negative effect.
view full answer... - Towbar Wiring and Supplemental Braking and Monitoring System for 2016 Chevy ColoradoThanks for your business; I see that you purchased the # RM-766 Automatic Battery Disconnect and # RM-156-25 Battery Charge Line Kit along with a few other accessories. The # RM-751000, which you were looking at, actually isn't needed on your 2016 Chevy Colorado. A supplemental braking system like the Roadmaster Even Brake # RM-9400 is what's required to actuate the Colorado's brake pedal in order to activate the brakes. The Included with the system is also an emergency breakaway kit and...
view full answer... - 2014 Ford Explorer XLT - 4wd 3.5 LI'm going to try to present a lot of information here about your vehicle, but to give you the short answer- in this case, your 4wd is actually an AWD system, so you will be able to dinghy tow your 2014 Ford Explorer XLT 3.5L Eco-Boost. Typically, the difference between an AWD and 4wd vehicle is that the AWD vehicle is constantly providing power to all 4 wheels (both axles are continuously engaged), whereas a 4wd vehicle has a transfer case that can be switched between powering a single...
view full answer... - Troubleshooting Signal Loss With The Roadmaster Even Brake Supplemental Braking System The Roadmaster Even Brake Portable Supplemental Braking System - Proportional Item # RM-9400 doesn't have a signal booster but you can use the Roadmaster Stop Light Switch Kit Item # RM-751463 to get a signal to your dash to know that your brakes are being effectively applied.
view full answer... - Parts Needed to Flat Tow a 2001 Chevy Tracker Behind a Motor HomeI found a copy of the owners manual online for the 2001 Chevy Tracker and found that you can flat tow it (see section 4-44 in the owners manual). There are specific procedures outlined in the manual that you will need to follow. There are at least 5 items you will need to flat tow the Tracker. First you will need base plates like # 1012-1. The base plates provide a safe and secure attachment point for the tow bar, which is the next item you will need. For a compatible tow bar I recommend...
view full answer... - Best Flat Towing Setup Recommendation for a 2005 Honda Element EXWe have everything you need to flat tow your 2005 Honda Element. First you will want to start with a base plate kit. This will provide the attachment point for the tow bars to your vehicle. For that I would recommend the Roadmaster base plate kit part # 1541-1. This kit has removable arms so that when not in use you wouldn't have to big brackets sticking off the front of your vehicle. The Roadmaster Tracker part # RM-020 is an entry level tow bar that would work for you, but it would...
view full answer... - How Much Does Flat Towing Setup For 2014 Jeep Wrangler Weigh?I would be happy to help. The weights of the products you mentioned are as follows: Roadmaster Direct-Connect Base Plate Kit - Removable Arms # RM-521448-5 42lbs Roadmaster Falcon 2 Tow Bar - Motorhome Mount - 2" Hitch - 6,000 lbs # RM-520 61lbs Roadmaster Even Brake Portable Supplemental Braking System - Proportional # RM-9400 24lbs You will still need safety cables, wiring, and a few components for the # RM-9400 to tow your 2014 Jeep Wrangler. For safety cables I recommend the RoadMaster...
view full answer... - Replacement Transmitter for Roadmaster Even Brake Supplemental Braking SystemsIf damaged wiring/plugs were used or there was a short because of a wiring issue it could cause the problem you are facing with the Even Brake, # RM-9400. I have also included a link to the manual for the Even Brake which has a troubleshooting section that might help. If in the process of troubleshooting the handheld unit will not make contact with the base unit then it is likely the transmitter. If you need to replace the transmitter for the Even Brake it is # RM-9420. It is also possible...
view full answer... - Will the Blue Ox Patriot Work With A Backup Camera On a 2.4 GHz FrequencyI have attached the owner's manual for the Blue Ox Patriot Portable Braking System part # BLU37TR and the Roadmaster Even Brake Portable Braking System part # RM-9400 to this answer page for you. Please note however that the owner's manual and installation manual are one in the same and this is all the literature that the manufacturer provides so if you have a specific question about either please just let me know. As stated, the Blue Ox Patriot operates on a 2.4 GHz frequency so it would...
view full answer... - Base Plate Kit and Flat Towing Accessories for 2006 Cheverolet HHRAn HHR LS and LT use the same base plate kit. As long as the HHR is NOT an SS model, the Roadmaster # 3141-1 base plate kit you referenced would work just find for you. To flat tow your vehicle, you'll also need to check with your owner's manual and determine if your HHR is capable of being flat towed. To complete your towing system, you'll need a towbar, safety cables, wiring, and a supplemental braking system. For a towbar, the Roadmaster Falcon 2, part # RM-520 would be a great choice....
view full answer... - Braking System to Tow a 1999 Chevy Tracker Behind a Motor HomeYes, the Roadmaster Even Brake, # RM-9400, is listed as a fit for your 1999 Chevy Tracker. A 12 volt outlet kit, # RM-9332, is also recommended for proper functioning of the braking system. I have also included a link to the right to the braking systems we have recommended for your Tracker.
view full answer... - Components Needed to Flat-Tow 2013 Fiat 500 using SMI Stay-IN-Play DUOFirst thing you will need to flat tow your 2013 Fiat 500 Pop is a base plate kit. For that you would want the Roadmaster EZ2 Base Plate kit part # 522013-1A. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon 2, # RM-520. For safety cables you can use # RM-643. The coiled design helps keep the cables off of the ground. For lighting you can...
view full answer... - Recommended Roadmaster Flat Towing Components for 2010 Pontiac G6For the most discreet appearance on your 2010 Pontiac G6 I recommend the Roadmaster XL Base Plates # 3165-1 because once you remove their arms the car will look almost exactly as it did before installation. For your tow bar you can use the Roadmaster Falcon 2 # RM-520 which has been rated with an almost perfect satisfaction score from our customers. For safety cables use part # RM-643; their coiled design prevent dragging on the ground. For a braking system I suggest one of the Blue Ox...
view full answer... - Parts Needed to Flat Tow 1998 Dodge Ram 1500 4x4 with Automatic TransmissionWe can help you with the components needed to flat tow your 1998 Dodge Ram 1500 4x4. Starting with base plates, we do offer a Demco option, part # DM9517085, that will work with their Excali-Bar II Tow Bar # DM9511009 that you referenced. For lighting you can use the bulb and socket kit # RM-155 which avoids you having to cut and splice the vehicle wiring. For a braking system the easiest system to set up is the Even Brake proportional system # RM-9400 that applies the vehicle brakes in...
view full answer... - Parts Needed To Flat Towing A 2022 Jeep WranglerCurrently, no manufacturers have made a complete flat towing setup custom engineered for a 2022 Jeep Wrangler. However, I'll still tell you what you are going to need. First, you're going to need a base plate like # e98948. A base plate is used to allow your RV to connect to the toad vehicle. Next, you'll need a set of tow bars. I recommend the Blue Ox Alpha 2 Non-Binding Tow Bars # BX7380. These tow bars are rating for a maximum weight capacity of 6,500lbs and directly connect the base...
view full answer... - Base Plate and Tow Bar Recommendation for a 2000 GMC JimmyThe Roadmaster Classic Base Plate Kit, part # 165-2 would be the correct choice for a base plate kit if your 2000 GMC Jimmy was a 4-wheel drive or an Envoy, but not a Black Diamond or an Xtreme. I attached a helpful link that has all of the available base plate kits for your 2000 GMC Jimmy for you to check out. All of these should work well with your Roadmaster Falcon 2 Tow Bar, part # RM-520 that you referenced. You will also need the following to complete your setup: Magnetic Towing...
view full answer... - How Well Does the Battery Isolation Solenoid, # TR118665 PerformThe Battery Isolation Solenoid, # PK5231201, will be installed on the vehicle that is doing the towing. If you are flat towing the 2011 Jeep Wrangler, then the battery isolator will be installed on the vehicle that is towing it. If the Wrangler is doing the towing, it will installed in the Wrangler. The isolator works well. We have not had any comments that would indicate poor performance. It is a very simple design. One line goes in from the vehicle battery to one of the side terminals,...
view full answer... - Parts Needed To Flat-Tow My 1987 Suzuki SamuraiYes, the Roadmaster Classic Base Plate Kit, part # 1003-1 is the correct base plate kit for your 1987 Suzuki Samurai. The Roadmaster Tow Bar Adapter, part # RM-032, that you selected will allow you to use your Demco Excali-Bar Tow Bar. For lighting or wiring, you could use the item you referenced, Hopkins Tow Bar Wiring, part # 38955. If you will not be towing your Suzuki often, you could just go with the Magnetic Towing Light Kit, part # RM-2120, and connect to the vehicle each time you...
view full answer... - Parts Need to Flat Tow a 1989 Nissan Pickup TruckIt is possible that there could be some drilling involved when installing Roadmaster Base Plates, # 305-1, if a hole for the included hardware is not present. Otherwise, if that hole is present, it is bolt on application. There should not be any machining that needs to be done or special requirements. As long as you take your time on the bumpy washboard road, there should not be any problems. For a compatible tow bar, I recommend the Roadmaster Tracker, # RM-020. You will also need safety...
view full answer... - Can the Stowmaster Towbar with Lunette Ring Be Stored On a 1998 Dodge Dakota for TravelYes, the RoadMaster StowMaster Car-Mounted Tow Bar with Lunette Ring, item # RM-581, and the Roadmaster XL Base Plate Kit, item # 246-5, would be a great option for you flat towing your 1998 Dodge Dakota. The Tow Bar with Lunette Ring will be able to be stowed on the Dakota in the folded postion for travel when the vehicle is not attached to the motorhome. You will also need safety cables, # RM-643 would be a good choice, and lighting for the Dakota when towing. The RoadMaster Tail Light...
view full answer... - How To Wire In The Roadmaster Even Brake In A 2018 Ford Transit With A Bulb And Socket Light Kit The brake light switch wire on the 2018 Ford Transit 350 is going to be purple/white. If you didn't tap into this wire then you'll get no signal for the relay of the Even Brake # RM-9400 to work off of. That being said, since you're using a bulb and socket kit there's no need for a brake light relay since the lighting is completely separate from your vehicle and will turn on the same as if you were pulling a trailer behind your motorhome. You'll just need to splice a wire into the white/purple...
view full answer... - Parts Needed to Flat Tow a 2013 Jeep Wrangler Behind a Motor HomeThere are at least 5 things you will need to flat tow your 2013 Jeep Wrangler: base plates, a tow bar, safety cables, lighting, and supplemental braking. For a great clean look I recommend the Demco tabless base plates # DM9519292. They're barely noticable. You do need to have the factory bumper for the Sport model in order for them to fit. If you have a different front bumper let me know what it is or send me a picture. I attached a picture of the base plate kit installed so you can...
view full answer...
Do you have a question about this Tow Bar Braking System?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Brent H
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
David F
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Rachael H
Expert Research:
Jeffrey L
Updated by:
Lindsey S
Updated by:
Adele M
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Amanda M
Updated by:
Hannah L
Updated by:
Mike S
Updated by:
Isabelle B
Updated by:
Amanda K
Video Edited:
Jacob T
Video Edited:
Andrew L
Video Edited:
Kathleen M
Video Edited:
Dustin K
Video Edited:
Sue W
Video Edited:
Chris R
Video Edited:
John S
Video by:
Alan C
Video by:
Zach D
Video by:
Michael B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Robert
10/11/2023
It is working great. Have just used it on a 2700 mile trip. It has been easy to hook up and disconnect. It has given us that feeling of extra security towing our vehicle.