Lippert Manual Pull-Out Step for RVs - Triple - 7" Drop - 25-3/4" Wide - Steel - 300 lbs
(600 reviews)
Price: $219.27
In Stock
Lippert Manual Pull-Out Step for RVs - Triple - 7" Drop - 25-3/4" Wide - Steel - 300 lbs
Item # LC432687
Retail:$234.95
Our Price: $219.27
You Save: $15.68
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (600)
- Q & A (0)
- Photos
Lippert RV and Camper Steps - LC432687
- Towable Camper
- Pull-Out Step
- 3 Steps
- 24 Inch Wide Step
- Lippert
- 27-1/2 Inch Wide
- Steel
- 7 Inch Drop/Rise
- No Ground Contact
This 8-1/4" deep, triple pull-out RV step opens and closes with just 1 hand. Anti-skid tread tape and water collection channels on step surface provide safe entry and exit. Bolts or welds onto your RV frame. Rust-resistant black powder coat.
Features:
- Manually operated RV steps make it easy to get into and out of your motor home
- Simply pull steps out for use and position back in place for travel
- Non-skid and slip-resistant step design
- Tread tape provides sure footing
- Water channels and drain holes help to keep rain from pooling
- Grab handle eases use and keeps hands clear of moving parts
- Black powder coated steel is sturdy and rust resistant
- Easy bolt-on or weld-on installation
- Mounts to RV frame in same manner as original step
Specs:
- Entry height: 24-1/2" - 27-1/2"
- Step dimensions: 25-3/4" wide x 8-3/4" deep
- Mounting bracket dimensions: 27-1/2" wide x 14" tall x 12" deep
- Drop/Rise: 7"
- Weight capacity: 300 lbs
- 1-Year warranty
Will Lippert Pull-Out Steps Work for You?
Pull-out steps are typically installed on travel trailers. The pull-out steps from Lippert are easy to install and fold up underneath the camper for simple storage. To ensure you choose the correct size for your application, there are a few measurements you will need to take.
The Lippert pull-out steps attach the underside of the camper chassis, directly beneath the doorway. To decide which size you'll need, locate the space available underneath your camper that lines up with the door frame, and measure the width and depth. You will need a mounting space that is at least 27-1/2" wide and 12" deep.
If it turns out you have more or less space beneath your doorway, there are other step assemblies available with bracket sizes ranging from 25-1/2" wide to 28" wide. A full list of the available steps is below.
Outriggers - metal brackets that act as an extension (LC301704 - sold separately) - may be needed for installation depending on the model of your original stairs. These provide extra length if the old steps are longer or wider than the new.
Once you know where the mounting bracket will go and what size mounting bracket you need, that spot will be used as the "mounting point" to determine how many steps you will need.
How Many Steps Do You Need?
To determine how many steps you'll need, measure from the mounting point to the ground. This is called the entry height. The entry height should roughly match the height of the steps when they're fully extended, plus 6" to 9" to account for the drop from the bottom step to the ground. This measurement will also tell you how many steps you need.
The chart below displays entry height measurements in the first column. If you determined you need a 25-1/2" mounting bracket, the step part numbers with that width are in the second column. If you determined you need a 25-3/4" mounting bracket, the step part numbers with that width are in the third column. The steps for 27-1/2" mounting bracket widths are in the fourth column, and the steps for 28" mounting bracket widths are in the fifth column. Choose the bracket size that is closest to your measurements without going over.
This page's step assembly is in bold text.
| Entry Height | 25-1/2" Mounting Bracket Width | 25-3/4" Mounting Bracket Width | 27-1/2" Mounting Bracket Width | 28" Mounting Bracket Width |
|---|---|---|---|---|
| 14-1/4" - 17-1/4" | Not available | LC432678 | Not available | Not available |
| 21-1/2" - 24-1/2" | LC432682 | Not available | Not available | Not available |
| 24-1/2" - 27-1/2" | Not available | Not available | LC432687 | Not available |
| 31" - 34" | Not available | Not available | LC432696, LC432690 | Not available |
| 36-3/4" - 39-3/4" | Not available | Not available | Not available | LC432698 |
How Do You Install the Steps?
To install the steps:
- Make sure the camper is level on flat ground
- Lift the steps into the mounting space and prop into place
- If needed, mark the mounting holes on the camper and drill
-Set aside steps before drilling
- If needed, install the outriggers
- Align step mounting holes and secure in place with bolts and flange lock nuts
-Make sure the bracket is backed up fully against the I-beam on the chassis
-Hardware not included
- Tighten hardware until snug
- Make sure assembly is sitting square and level
- Torque the hardware to 20 ft-lbs
432687 Lippert Components (LCI) Triple Radius Entry Step
Similar to Hickory Springs 953240RFXWC3, 95324EXTALC1, and 953240RFALC1
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
- etrailer mistake
Customer Reviews
Lippert Manual Pull-Out Step for RVs - Triple - 7" Drop - 25-3/4" Wide - Steel - 300 lbs - LC432687
Average Customer Rating: 4.8 out of 5 stars (600 Customer Reviews)
This 8-1/4" deep, triple pull-out RV step opens and closes with just 1 hand. Anti-skid tread tape and water collection channels on step surface provide safe entry and exit. Bolts or welds onto your RV frame. Rust-resistant black powder coat.by: Carmen 04/11/2024
Installation was not difficult. Pulled stairs out of box and mounted in about 15 mins. 2x4, jack and one husband! DONE! Did not come with any installation hardware. Good thing I kept the old parts or that would have been a pain, having to go to the store for parts.
by: Tim05/17/2023
Trailer not required. Steps completed a stairway to the baptisamal.
by: Mike 09/29/2023
Had to make a slight modification to the mounting bracket on the trailer. Steps are a perfect replacement. Like the ease of operation. Good choice of steps. Very quick service. Ordered on Monday arrived on Wednesday afternoon.
by: Vickie08/26/2023
Our experience with trailer has been great. We were on the road out of our home state when our steps were damaged. We called them and we had our new steps in just a couple days. Friendly staff, prompt service,and quality products.
by: Les08/03/2023
The steps arrived with some shipping damage, but Carol C. in Customer Service promptly shipped a replacement and submitted a pick-up request for returning the damaged item. I got the replacement within a couple of days. etrailer continues to show integrity and a real commitment to its customers! Thanks for running your company with pride.
by: Hugh08/17/2023
Product is a good replacement for our damaged stairs. It was sent to us in the manufacturers packaging which, is suspect, isn't meant for shipping by itself. The box was damaged and the new steps slightly bent and scratched upon arrival. A little tweaking and all is well. Otherwise it fit well. Thanks.
by: Jim08/02/2020
I bought a used fifth wheel that had a broken step on it, so I googled my trailers info and etrailer.com came up with the part number and price, ordered it and got it in four days and in a half hours time with my wife’s help we had it installed using a couple blocks of wood and 2x4.
It feels nice and safe now.
by: Dave08/17/2019
Amazing product and outstanding service. I could not be happier.
I had not seen a set of LCI fold up stairs installed on a step van and George was a lot of help with info I needed. I purchased a used set in case it didn't work and they turned out perfect.
by: Ryan08/04/2023
I had bent up my old stairs and these stairs were super easy to install and work smoothly as a replacement.
by: Roy06/09/2020
The steps were exactly as described. Easy to install and a perfect fit on my 2006 Montana 3400RL 5th wheel. Shipping was fast and free.
by: Keith 08/27/2021
We have sold the RV that I had purchased the steps for and just hung onto them. The RV that we replaced it with has a little better steps so I haven't installed the Solid Step on this one. I still may do it but this RV is a little higher off the ground so I don't know if the 3 step unit is going to be tall enough. The Lippert Solid Step is definitely an upgrade for anyone that has the manual pull out steps on their unites.
by: Ronald 10/19/2023
Great item, it is the only step unit I could find with 7" rise steps.
by: Charles C.11/21/2016
We have a bunkhouse Cruiser Aire. My wife had polio as a young girl and has problems getting up and down stairs, She is 72 and it became near impossible for her to access the RV. I built her some stairs from lumber and they worked alright, But it also gave me some added chores with a lot of straining to move them from the back to the door for her at every stop. I was absolutely surprised when I discovered the lippert steps with the shorter 6.5" rise. Believe me rise in steps is extremely important to handicapped people. These new steps have given new meaning to access for her. We are very happy we found Lippert steps through E-Trailer! We are going to buy another set next year for the rear door of the trailer. Great customer service and fast shipping! Glad your here!
Charles C.
11/21/2017
Very nice!
by: KD10/18/2021
The product was excellent and an exact match to what was already on the travel trailer. 5 stars to etrailer and great service.
Kd
10/19/2022
Since my last review of this product, due to an accident, I have purchased another set. Installation was simple and the steps work great.
by: Lee01/01/2023
The steps are fine, but the 5 stars are for your customer service! I really appreciated the free shipping - as the item is HEAVY - and the speed of the delivery! Sadly, now I have to sit in the snow and repair my camper… . Perhaps I will wait for spring. Thank you!
by: Carl 12/31/2022
It was exactly what I needed. Everything lined up and was easily installed. The only suggestion I would have is to package differently. There were a few dings and scratches on the steps. Bubble wrap or putting the box in a box would have prevented that.
by: Don 07/13/2023
Everything fit but had to struggle with it a little bit as the bolt hole was slightly off. Got it together none the less and it works great.
by: Rickey 08/11/2018
Very good product and very strong. Fast shipping. Had to make some modifications, but I was expecting that. They do hang down a little more than I expected but should be fine. Thanks for a great product
by: Ryan 09/12/2023
Everything went hreat
by: Bob 01/26/2023
“Donna” was a big help in ordering these over the phone. We received our new stairs today-3 days earlier than expected! I already installed them…they fit perfectly and work great! Great quality product and wonderful customer service.
by: Robert06/08/2020
Perfect replacement steps for our travel trailer. Website provided great information to take guess work out of measurements to find a perfect fit.
Robert
6/9/2021
After a year we could not be happier with the steps, easy to install, folds very easy, very sturdy.
by: Josh 10/11/2022
These are really well built stairs. There are different configurations, so make sure this exactly matches the bracket on your RV. I had to do some customization, but it was worth it because the other stair options didn't feel as solid as this.
by: James 07/16/2023
Excellent product
Very quick delive ry
by: Ed S.10/13/2019
We ordered new steps from etrailer for our 5th wheel when the metal tore on one side of our existing steps. We had done our homework - checked others sites. The difference - etrailer had the replacement steps in stock at a better price than most and answered my questions. The steps arrived as promised. Instructions were clear and the install was easy. I was able to do it without help.
25
599
Show More Reviews
See what our Experts say about this Lippert RV and Camper Steps
- How to Determine if Lippert Manual Pull-Out Step Assembly will Fit 2015 Forest River TrailerIn order to determine if the Lippert Manual Pull-Out Step for RVs # LC432687 referenced in your question will work on your Forest River Surveyor Cadet, you will just need to take a few measurements on your existing unit. You will want to first measure the width of your step assembly. This will be the width of the step housing that is mounted to your trailer. I also recommend measuring the step height on the unit. Lastly, take a measurement from the center of the mounting bracket, between...
view full answer...
- Could RV Pull Out Steps Be Installed on Pontoon Boat TrailerThe Lippert Electric Tread Lite Step # LC353621 was not intended for boat trailer applications where it would get submerged. None of our powered options were designed for that. You'd have to go with a manual pull out step like the Hickory Springs steps part # 952240RXWAC1.
view full answer... - Recommended Replacement Steps For 2017 Forest River Sandstorm 27I can absolutely recommend a set of replacement steps for your 2017 Forest River Sandstorm 27 but you will need to do a quick measurement of your entry height to confirm the correct model as we unfortunately do not have a way of checking the entry height on your RV. I recommend the TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear which you will need # TLA8104 if your entry height is between 32-1/2" - 44", # TLA8103 if your entry height is between 25-1/2" - 36", or # TLA8102 if...
view full answer...
- Do Lippert Manual Pull-Out Step for RVs # LC432687 Install with Vertical Mounting HolesThe top of the step kit part # LC432687 that you referenced does have mounting holes that are spaced 7 inches apart on center. Depending on your frame setup that may work for you. You might be best served with mounting new outriggers on your Canyon Star like part # LC301704 so that you can use brackets designed for use with these steps.
view full answer... - Replacing Auto Steps With Manual Steps on Forest River RVThe steps you need are going to depend on some measurements you'll need to take; as for the installation, each of these can be either bolted on or you can have a professional weld them on. The right step for you is going to depend on the amount of length you have from your doorway to the ground, as well as your current mounting base dimensions, which need to match up in order to get a secure fit. The Lippert Manual Pull-Out 2 step # LC432682 has mounting base dimensions of 25-1/4" wide...
view full answer... - Availability of Triple Step for RV that is 24 inches WideSounds like you are looking for a 24 inch wide powered RV step like the Kwikee set part # LC3658373. If instead you needed a manual set you'd want the part # LC432687 and you'd be set.
view full answer... - How to Determine if Steps Will Fit TrailerI can tell you how to determine if the Lippert steps you asked about will fit your trailer (it's really easy, I promise), though we don't have any way of knowing what steps that will fit a model year 2000 pop-up trailer. All you need to do os measure to ensure you have enough room for the mounting bracket to fit. For example, the Lippert Manual Pull-Out Step for RVs # LC432687 you asked about has mounting bracket dimensions of 27-1/2" wide x 14" tall x 12" deep. I have added a link to...
view full answer... - Replacement Steps for a 2002 Holiday RamblerIn order to determine what would be the correct replacement steps for your 2002 Holiday Rambler you will need to get the dimensions of the steps that are currently on your trailer and compare them to the picture I attached that shows the dimension of the RV Steps part # LC432687. If the dimensions match what is in the picture the # LC432687. I attached a measuring video for you to check out as well as an install video for the steps that should be very helpful.
view full answer...
- Rise and Run on Lippert Manual Pull-Out Steps # LC432687 The Lippert Manual Pull-Out Steps # LC432687 that you referenced features a rise/drop of 7 inches, which refers to the distance/height between each step. The run is just the width of the step, which is 8-3/4 inches on this assembly. I have attached an image to assist.
view full answer...
- Recommended RV Steps For A 2015 Lance Trailer With A 25-1/2" Mounting Bracket Spacing We do carry adapters # LC301704, but with yours new steps sitting further out you might have some issues with the crossbeam of the step hitting the current mounting brackets. If you wanted to make it work you could cut of the older brackets and use the # LC301704 to mount the new steps. If you'd rather just get ones to mount to the current brackets then we do have a few other options available. For Lippert we have part # LC432682, which are designed for a 21-1/2" - 24-1/2" entry height....
view full answer... - Does The Lippert Solid Stance RV Step Support Work With The Lippert Tread Lite Steps?Since your Lippert Electric Tread Lite Step for RVs # LC353543 is made of aluminum, the Lippert Solid Stance RV Step Support # LC96BJ will not work for you, unfortunately. instead, you'd need steps made of steel like the Lippert Manual Pull-Out Step for RVs # LC432687. You will also need at least 5" of ground clearance to ensure you have a proper fit. I have attached a couple videos for you to check out as well.
view full answer... - Replacement Steps For 27-3/4 Foot Trailer With 3 StepsOn of our most popular 3 step options is the Lippert Manual Pull-Out Step for RVs - Triple - 7" Drop/Rise - 24" Wide - Steel - 300 lbs # LC432687. This step has Mounting base dimensions of 27-1/2 inches wide x 9 inches deep. The bolt hole centers are 26-1/4 inches wide x 7 inches deep. We also have electric step options like Lippert Components Kwikee 25 Series Triple Electric Step # LC3658374. If you let me know your bracket dimensions and mounting hole dimensions, I can confirm a replacement...
view full answer... - Which Lippert Manual Pull-Out Steps Fit Intech Sol Horizon RoverTo find which steps fit your Intech Sol Horizon Rover you will have to measure. The Lippert pull-out steps attach the underside of the camper chassis, directly beneath the doorway. To decide which size you'll need, locate the space available underneath your camper that lines up with the door frame, and measure the width and depth. To determine how many steps you'll need, measure from the mounting point to the ground. This is called the entry height. The entry height should roughly match...
view full answer... - Entry Door Opening for SolidStep Manual Fold-Down StepsThe SolidStep Manual Fold-Down Steps for 29" to 36" Wide RV Door Frames, # LC791575 requires that the door open to at least 90 degrees for the steps to deploy. This set of steps is for an entry height of 35" - 44" and a doorway width of 29" - 36". If your door will not open the required minimum due to restrictions from the entry door gas shock, I suggest you consider replacing it with one that has a longer reach. To determine the correct replacement. all you have to do is measure your...
view full answer... - Availability of 3 Step with Shorter Rise Than Alumi TreadI did some checking and it looks like you bought the Alumi-Tread Manual Pull Out Steps # LC432696. The step rise of this has is 9 inch. For a similar RV step that has a lower amount of drop we have the part # LC432687 which has an 7 inch rise between steps.
view full answer... - Are There Any Folding RV Steps That Have A 6" Rise The closest folding step option we carry to a 6" rise is the Lippert Manual Pull-Out Step for RVs # LC432687. These steps have a 7" rise and mount underneath the door threshold. For these to work you would need an entry height of 24-1/2" - 27-1/2" and a mounting bracket width approximately 27-1/2" wide. The fold down steps that MORrdye and Lippert make all have an 8" rise so they would be above what you're looking for but these do have handrail options to help make climbing up and down...
view full answer... - RV Pull Out Step Solution for Hay Wagon with 33 inch Floor HeightFor a 33 inch floor height I'd recommend a 4-step pull out step setup like the Flexco Manual Pull-Out Steps for RVs # SMFP-4400 over a 3 step as you'll want that extra step based on the height you have. To help attach the steps to your RV a set of outriggers # LC301704 would be your best option. These will easily attach to your trailer frame and give a set of brackets for the steps to secure to.
view full answer... - Will Lippert 3 Step LC432687 Replace Lippert 2 Step on Trailer Yes, the Lippert pull out 3 step part # LC432687 is going to have the same mounting specs as a 2 step version so this step would work well for you.
view full answer... - Can 3-Step RV Step Replace 2-Step VersionWhen you go from the 2-step versions of the Hickory Springs steps to the 3 step the mounting brackets do get a bit wider. The part # LC432687 which is the three step version is about 2 inches wider which means you'd need to move your current outriggers or install new ones with the part # LC301704.
view full answer... - Weight Capacity of Lippert 3 Step Pull Out RV Steps LC432687According to my Lippert Components representative, their # LC432687 Manual Pull-Out RV Steps have a 300 lb weight capacity.
view full answer... - Triple Step Recommendation for a 2010 Springdale SRTThe Triple Step part # LC432687 would work for you and could potentially install pretty easily depending on where you measured the distance between the mounting brackets. I attached a picture and a set of installation instructions that have the dimensions of this step listed for you to check out. You may already have outriggers installed on your 2010 Springdale SRT, but if not you would want the part # LC301704. I also attached a couple helpful videos for you to check out as well.
view full answer...
- Is 27-1/2 inch RV Step Mounting Bracket Width Normal Size27-1/2 inch wide mounting brackets is very common for RV steps as that's what is most commonly seen on RVs. That's why RV steps like the part # LC432687 have overall widths that match that.
view full answer...
- Distance From Top Step To Bracket While Stowed On the Lippert Manual Pull-Out Steps LC432687In regards to the Lippert Manual Pull-Out Step for RVs part # LC432687, the distance from the top of the first step to the top of the mounting bracket while in the stored potion is 3.63" according to Lippert. If this was not what you were looking for please just let me know.
view full answer... - Recommended Pull Out Steps For A 2017 Coachmen Apex 275BHSSBased on the measurements you provided me the Lippert Manual Pull-Out Step for RVs # LC432690 would not fit the entry height of your camper so instead you'll need the Lippert Manual Pull-Out Step for RVs # LC432687. These steps can easily bolt right up into your frame and has a rust-resistant black powder coating.
view full answer...
Do you have a question about this RV and Camper Step?
Info for this part was:
Expert Research:
Jameson C
Updated by:
Kathleen M
Updated by:
Wilson B
Updated by:
Halie H
Installed by:
Cole B
Written by:
Chelsea B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Keith
8/29/2022
We have not used the steps on our newer 5th wheel because the steps are about a 14 too wide for the doorway. I still would recomend the Solid Step for anyone wanting to to upgrade their entrance steps. They are have a greater tread depth than most standard steps. They are more stable seeing as they are contacting the ground.