Recommended Pull Out Steps For A 2017 Coachmen Apex 275BHSS

Question

Question:

Will these fit a 2017 Apex 275BHSS?

asked by: Matt

0

Expert Reply:

Based on the measurements you provided me the Lippert Manual Pull-Out Step for RVs # LC432690 would not fit the entry height of your camper so instead you'll need the Lippert Manual Pull-Out Step for RVs # LC432687. These steps can easily bolt right up into your frame and has a rust-resistant black powder coating.

expert reply by: Kevin C

0

Answer 1

To determine the best choice of MORryde StepAbove RV steps for your 2016 Coachmen Apex Travel Trailer you need to have the threshold height measurement and the doorway width. With your travel trailer arranged on a flat surface, deployed as you will…

view full answer...

Answer 2

Hey Jeff, from previous customers who have given us the part number you mentioned we have found that the matching MORryde StepAbove is the part #MR65RR which has 23.5 inch wide steps and is a 3-step setup with the strut assist.

view full answer...

Answer 3

The SolidStep Manual Fold-Down Steps part #LC791572 will fit a door way from 25" -28.9" wide when measuring the frame inside. If the factory label sticker shows a doorway width between 26"-29" then the above steps will work for…

view full answer...

Answer 4

We carry a wide range of replacement RV and trailer step assemblies and these are offered in several sizes and step counts. Based on my research the 2011 KZ Sportsmen 290 travel trailer comes fitted with a 3-step manual unit, one like #LC432690 from…

view full answer...

Answer 5

Kenny, those bolts for the B&W Companion 5th Wheel Trailer Hitch #BWRVK3500-5W should be torqued to 40 ft. lbs. Also, the pivot arms would need to be torqued to 80 ft. lbs, the draw down bolt should be tighten to 60 ft.lbs and the arms should be…

view full answer...

Answer 6

For Lippert Manual Pull-Out Step #LC432690 the mounting holes are 26-3/8 inches apart on center, side to side, and 7 inches apart on center front to back. The side plates are 16 inches tall. I have included some pictures with these and other…

view full answer...

Answer 7

The closest pull-out steps we currently have available to match the steps you are replacing in your RV is the Lippert Manual Pull-Out Step for RVs #LC432690. This 3 Step product measures 24 inches wide with a 9 inch drop and the overall width of its…

view full answer...

Answer 8

The Advent Air RV Air Conditioner w/ Air Distribution Box and Wall Thermostat #ADV64FR does have an auto setting that will kick the fan off and on as needed to your set temperature. That being said on most RV air conditioners the temperature sensor…

view full answer...

Answer 9

The Advent Air AC Unit part #ADV94FR comes with a vent setup that is designed to be controlled with a wall thermostat but we do have the #ACM135BC that comes with a lower vent assembly with controls built into it. I attached an install video and set…

view full answer...

Answer 10

The Advent Air RV Air Conditioner w/ Air Distribution Box and Wall Thermostat part #ADV94FR is a complete unit, it has everything you need to install the air conditioner. It will not utilize any existing plugs or anything but if you already have…

view full answer...