Which Lippert Manual Pull-Out Steps Fit Intech Sol Horizon Rover
Question:
I need to know which Lippert pull out steps would fit a Intech Sol Horizon Rover.
asked by: Wanda P
Expert Reply:
To find which steps fit your Intech Sol Horizon Rover you will have to measure. The Lippert pull-out steps attach the underside of the camper chassis, directly beneath the doorway. To decide which size you'll need, locate the space available underneath your camper that lines up with the door frame, and measure the width and depth.
To determine how many steps you'll need, measure from the mounting point to the ground. This is called the entry height. The entry height should roughly match the height of the steps when they're fully extended, plus 6" to 9" to account for the drop from the bottom step to the ground. This measurement will also tell you how many steps you need. You can choose from the following:
-Entry Height 14-1/4" - 17-1/4" and 25-3/4" Mounting Bracket Width # LC432678
-Entry Height 21-1/2" - 24-1/2" and 25-1/2" Mounting Bracket Width # LC432682
-Entry Height 24-1/2" - 27-1/2" and 27-1/2" Mounting Bracket Width # LC432687
-Entry Height 31" - 34" and 27-1/2" Mounting Bracket Width # LC432690
-Entry Height 36-3/4" - 39-3/4" and 28" Mounting Bracket Width # LC432698
Products Referenced in This Question
Lippert Manual Pull-Out Step for RVs - Single - 6" Drop - 24-1/4" Wide - Steel - 300 lbs
- RV Steps
- Towable Camper
- Pull-Out Step
- 24 Inch Wide Step
- 25-3/4 Inch Wide
- 1 Step
- 7 Inch Drop/Rise
- No Ground Contact
- Steel
- Lippert
more information >
Lippert Manual Pull-Out Step for RVs - Triple - 7" Drop - 25-3/4" Wide - Steel - 300 lbs
- RV Steps
- Towable Camper
- Pull-Out Step
- 24 Inch Wide Step
- 27-1/2 Inch Wide
- 3 Steps
- 7 Inch Drop/Rise
- No Ground Contact
- Steel
- Lippert
more information >
Lippert Manual Pull-Out Step for RVs - Triple - 9" Drop - 25-1/2" Wide - Steel - 300 lbs
- RV Steps
- Towable Camper
- Pull-Out Step
- 25 Inch Wide Step
- 27-1/2 Inch Wide
- 3 Steps
- 9 Inch Drop/Rise
- No Ground Contact
- Steel
- Lippert
more information >
Alumi-Tread Manual Pull-Out Step for RVs - 8" Drop/Rise - 24" Wide - Quad - Aluminum
- RV Steps
- Towable Camper
- Pull-Out Step
- 24 Inch Wide Step
- 28 Inch Wide
- 4 Steps
- 8 Inch Drop/Rise
- No Ground Contact
- Aluminum
- Lippert
more information >
Product Page this Question was Asked From
Lippert Manual Pull-Out Step for RVs - Double - 7" Drop - 24-1/4" Wide - Steel - 300 lbs
- RV Steps
- Towable Camper
- Pull-Out Step
- 24 Inch Wide Step
- 25-1/2 Inch Wide
- 2 Steps
- 7 Inch Drop/Rise
- No Ground Contact
- Steel
- Lippert
more information >
Continue Researching
- Q&A: Angle of Different Stabilizer Positions for Ark Drop Down Corner RV Stabilizer Jacks
- Q&A: Dimensions for the 10K Demco eZ-Latch A-Frame Trailer Coupler
- Q&A: Can ARK Stabilizer Jacks Rotate 180 Degrees
- Q&A: Replacement Step Compatible with 2016 R-Pod Trailer for Low Rise
- Q&A: Replacement Pull Out RV Steps For A 2018 Coachmen Apex Nano 193BHS Trailer Trailer
- Article: How to Measure for Travel Trailer and Fifth Wheel Steps
- Q&A: Recommended Replacement Stabilizer Jacks For A 2011 K-Z Durango 1500
- Q&A: Dimensions of Weld-On Plate for Ark Drop Down Corner RV Stabilizer Jack Kit
- Article: How to Measure for Motorhome Steps
- Article: Trailer Wiring Diagrams
- Article: Our Team Picked The Best Camping Gear of the Year - Here Are Their Top Choices
- Article: How to Measure for Trailer Hitch Drop
- Article: Must Have RV Accessories that Will Make or Break Your Trip
- Article: Trailer Maintenance Schedule