Class III Hitch Receiver For A 2014 Rockwood Fifth Wheel

Question

Question:

looking for a class 3 reciever to fit my 2014 rockwood fith wheel

asked by: Larry P

0

Expert Reply:

For your 2014 Rockwood Fifth Wheel I recommend the Adjustable Width Trailer Hitch Receiver for RVs, 18" to 51" Wide Item # C13702. This hitch can be welded or bolted to the frame and is adjustable for different frame gaps. It is a class III hitch with a 2" x 2" receiver tube opening, has a 500lb max tongue weight rating and a 5000lb gross trailer weight rating.

expert reply by: Shane H

0

Answer 1

The Weight Distribution I believe is best suited for your needs is the Blue Ox TrackPro Weight Distribution w/ Sway Control - 7-Hole Shank - 6K GTW, 600 lbs TW #BLU36FR. The tongue weight range for this weight distribution system is 200 lbs - 600…

view full answer...

Answer 2

With weight distribution systems you can't really make tight turns while backing up. What we recommend is that if you are basically backing up in a straight line you can leave the spring bars on the system. But if you think you will end up…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

An underslung trailer coupler is one that attaches to the bottom of the trailer frame and an overslung one is one that attaches to the top of the frame. The Replacement Head for Blue Ox SwayPro Weight Distribution Systems part #BXW4011 is for…

view full answer...

Answer 11

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 12

When it comes to installing The Timbren Rear Suspension Enhancement System #TFRRGR on your 2020 Ford Ranger they come in a pair. The Timbren springs has a 6,000 pound weight capacity, and no drilling is required during the installation. I attached an…

view full answer...

Class III Hitch Receiver For A 2014 Rockwood Fifth Wheel

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching