Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Carry generators, coolers, and other bulky gear behind your RV with this bumper-mounted cargo carrier. You don't need a hitch to install it and you can fold up if you need a little extra space for parking.
Features:
Specs:
Notes:
No matter how big your RV is you'll likely have gear you'd prefer not to store inside. This carrier lets you transport generators and fuel cans, so your storage compartments don't smell like gas. You can also strap coolers, luggage, and other bulky objects on it to free up space inside your RV. Lastly, it's great for carrying wet, dirty, or smelly items outside of the RV, keeping your interior clean and odor free. It has raised side rails that help prevent your gear from sliding off and provide multiple anchor points for a cargo net, bungee straps, or other tie-downs (sold separately).
Most RVs don't have hitches installed, so if you want to use a cargo carrier, you'd have to install a hitch receiver. However, this cargo carrier mounts on your RV's bumper, so you don't need a hitch to carry your gear. It's also designed to provide better load distribution across your bumper than a hitch-mounted carrier.
When the carrier is not being used, you can fold it up against the back of your RV. This is convenient if you need a little extra space at the campsite, if you're travelling but not carrying any gear at the time, or if you're parking close to a fence, a shed, or a garage. To fold the basket up, just remove the snapper pin from each arm assembly, fold the rack up toward your vehicle, then reinsert the pins through the holes in the top of the mounting brackets.
The carrier is easy to install. Just slide the mounting brackets over your RV's bumper, spacing them 17-5/8" apart (inside edge to inside edge), and secure them with the included M10 hex bolts. Attach the main arm assemblies to the mounting brackets with the included M16 hex bolts. Attach the basket to the main arm assemblies with the included M8 carriage bolts. The included support brackets mount to most RV frames to reinforce your bumper and prevent metal fatigue that can cause your bumper to detach.
Alternate Instructions
Average Customer Rating: 4.7 out of 5 stars (752 Customer Reviews)
Carry generators, coolers, and other bulky gear behind your RV with this bumper-mounted cargo carrier. You don't need a hitch to install it and you can fold up if you need a little extra space for parking.On July 27th I order e83YR 24x64 folding cargo carrier. Thanks to Jon G. Who provided the dimensions and spacing of the support arms . I was able to determine it would work on my Jayco trailer. The rack (in 2 boxes as expected) arrived n 2 days. Thank you UPS. Due to the extreme heat. I unboxed 1 box at a time . Inventoried everything. Nothing was missing. Did a loose assembly. Everything fit perfectly. Installed the e88ZR bumper supports that came with the rack. The "Trilobular threadforming" screws are NOT threadforming. No problem. Got the proper size tap and threaded the holes. Oh yes after stepping up the bit size . The excluded bit had no trouble finishing off the 6 holes to the proper size. Rack was very easy to install. Good fit and finish. Thank you again Jon G. And George J. I would recommend this rack and etrailer.
Had to reinforce the Trailer frame on a 2021 forest river, as this mounts to the "bumper" forest river only stubs the bumper on with short pieces, and we didn't think that would handle the leverage of weight on the carrier and the "back of the bus" bounce you get on a long fifth wheel. Having said that, we put a 9500 watt 500 Lb. generator on it and went pretty much coast to coast, with absolutely no problems! The carrier itself is awesome, and easy to mount. Fold up feature is great, for the short jaunts without the need for it.
Probably won't purchase through this company again. I gave the information on my model of RV and recieved the hardware. I found the "bumper supports" poor quality as the "self threading" screws provided did not work. Even worse the brackets which were supplied with the unit would not fit over my bumper. After discussion with this company they came to the conclusion what they provided would not work and they offered to pay half of the cost of return the items. This is ridiculous as they are the ones who told me it would work on my vehicle. Totally unacceptable they were unwilling to pay all costs for the return. I took the brackets to a shop and had them bent just enough so I could get them over the bumper and finished the installation. I would never trust them again to honor thier word that an item will work on my RV or vehicle.
Just what I needed for my Jayco to carry some ramps for my wife's electric scooter, as well as the blocks and power cord that were getting hard to load in the back of the truck.
Huerkamp R.
12/8/2023
I took several trips with my bumper pull travel trailer and Cargo Carrier and it worked well in carrying several large totes with STUFF inside them. I just ordered a toy hauler and removed the cargo carrier from the bumper on my traded in Jayco Eagle and will be trying to sell it on Marketplace.
Mike L.
12/8/2023
I was not excited to see it show up in two boxes and being a retired mechanic helped me assemble due to limited insight provided by the enclosed instructions. I would not advise anyone that does not have a large amount of mechanical experience to buy one of these due to the assembly instructions. When I first read the line on your box, my first thought was to send it back, I did not want to fight to put this together. I have bought multiple items from you over the years, first time I have been disappointed.
I have purchased several items from etrailer and all have been outstanding. When they say it fits , IT FITS, I like the way that they have videos of them doing the install and I can call and talk with experts that know the product that I have purchased. Thank you etrailer for this outstanding performance and dedication to the customer that most companies have forgotten.
Brody
12/10/2023
The carrier rack has survived a trip to Alaska and the Dempster Hyw. Yukon, I must say that the rack went through the roughest areas of BC and AK. Best rack I have used in the 5 years I started useing a rack on the back. The help that was also great was E Trailer and their outstanding expertise and knowledge of helping the customer on any product they sell. I have bought a few items and have the trust that E trailer gives
Jenny N.
12/11/2023
Overall, great rack...very solid and easy to install. However, two holes didn't quite align by a very tiny bit but had to be drilled to install the bolt. Also, one of the connection bars was not threaded correctly but the extension included extras so it worked out.
Overall fitment was okay. The rack does not sit level. When the trailer is level the rack is tilted down in the back, looks like its bent even though its not. Fasteners were typical chinese junk, have to be extra careful not to strip them. The packaging wasn't great. My rack arrived scratched up on the corners. It did bolt on pretty easily and has plenty of space for my needs. Not sure I would trust it with 500 lbs, but definitely good enough for the 150-200lbs I put on it. Overall it is a cost effective, quick/easy solution to add some carrying space on a camper. Should serve its purpose.
Jenny N.
8/15/2023
I am sorry that it arrived scratched and the packaging did not hold up. I will have our Customer Service team reach out to you.
Instruction stink.
Literally not good at all.
Sorry.
Steve
3/29/2024
Had to make changes Traveling causes bumps. Bumps added pressure to rack. So overtime it started to fail and downward. Had to brace it up to keep it from breaking. Sorry but without braces it eventually fails as the road bumps slowly damage it.
Shipping was fast. 1 hour from opening the box to installation. Took my time to lay everything out, get the right tools and a beer. Recommend layout shipping box or painting cloth to lay things out so you don’t scratch it. Yes, I know. It’s going to get scratched eventually. But why not protect it from the start.
Stephen
5/23/2023
Has worked as it should. Mounted on back 4 bumper without any problems. Always careful on the amount of weight I put on it.
Purchased a 24x64 Cargo Carrier for the rear bumper of our camper. Even with free "economy" shipping, it still arrived within just a few days. Installation requires basic tools and is pretty simple with the instructions provided. This will provide a nice place to carry a cooler or generator on our adventures!
We purchased this cargo carrier about a year ago and I have to say it was a great addition for our camper. Never a reason to ever take it on and off, we use it every time we travel to transport our trikes. It was so simple to assemble and install it made the purchase even better. Great product. Thanks!
This came with clear directions and assembled easily. Works as described in all photos, my opinion one of the best bumper storage carriers on the market today.
dont know yet havent had time to install the product
Easy to install and the substantial quality of this carrier far exceeded my expectations!
Well build and designed. Easy to assemble, and even though it's winter here, I'm thinking up a trip, just to use it. Very exciting to have this addition!
Troy
12/4/2022
Its been a year already, and this back rack has been a blessing for us. It is so well build, and can take the weight of items I put on it, I dont even think twice about worrying.
This was just what we needed for transporting generators and camp stove. Makes it so much easier that lifting those items inside the RV or truck. Quality of product is good and it functions as designed.
Very good product. Well made , fast shipping. Would give it 5 stars. Bolts and drill bits for bumper braces are junk. Bolts are not self threading, and drill bits wouldn’t drill one hole.
Strong. Was needed for extra space. Per fect
We love it works awesome on back of camper to carry our bikes and other cargo
Great quality.
Don
9/4/2023
Very well made.The only problem with it after some rain and I fold it up, rust poors out of it and gets on the bumper.
Product had slight damage upon arrival and was missing the proper parts. After a few weeks of back and forth between etrailer and myself without any true progress, I reached out to the manufacturer that they license the product from who provided some of the missing parts in just a few days without issue. The busted caps were not sent and customer service seemed disinterested to address the issue.
The cargo carrier has been on my trailer for approximately a week and is already showing signs of rust. I'll have to take it off and repaint...
Jenny N.
6/13/2022
It sounds like we missed the mark here and I will have our customer service team reach out to you. I do recommend touching the carrier with a rust resistant paint to help protect against corrosion.
Helpful Links
The trailer fit our bumper perfectly and was a major improvement in both height and stability over our old hitch-mounted carrier :-).
Disappointed that on our first trip two of the three mounting brackets broke and we needed to have them welded to continue on our trip. I left messages with etrailer and the manufacture, with no response. Disappointed.
I didn't recieve what I ordered. I recievced e99052 - RV bumper cargo carrier - extension - xl
Jenny N.
3/18/2022
I will have our Customer Service team reach out to you.
Do you have a question about this RV Cargo Carrier?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Shelby
12/8/2023
I would reiterate everything I said previously, and add that it has held up to the elements very nicely. No signs of rust, fading, etc. Would still highly recommend!