Measurements For Adjustable Width Trailer Hitch Receiver for RVs

Question

Question:

What is the dimension from face of receiver to back of crossbar on the Curt #13702 hitch

asked by: Charles P

0

Expert Reply:

The distance from the back of cross tube to the face of the hitch tube on the Adjustable Width Trailer Hitch Receiver, # C13702 is 8-3/4". Please see the product review video that is attached.

expert reply by: Michael R

0

Answer 1

If by trailer lock you are referring to the trailer coupler then I do have an option for you that will not require a lift kit or for you to remove the spare tire on your Jeep. For this, you are going to want to use a ball mount with an extended…

view full answer...

Answer 2

You can use the Adjustable Width Trailer Hitch Receiver for RVs, 18" to 51" Wide #C13702. To attach to the rear of your toy hauler. It is not recommended to haul a trailer with another trailer. In some states or provinces it may even be…

view full answer...

Answer 3

From the top of the mounting brackets to the top of the crosstube on the Curt Adjustable Width Trailer Hitch Receiver for RVs #C13702 measures about 2" and then from the crosstube to the end of the receiver measures about 6". I have…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

Hey Dave, so the best option for carrying your carbon frame bike and e-bike is the Swagman Escapee part #S39SR with the ramp #S59SR . It has the capacity for carrying an e-bike, is rated for travel trailer use, only touches the bikes by the tires…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Yes, you can install a Curt Trailer Hitch Receiver #C11433 on your 2019 Chevrolet Spark. This receiver is capable of supporting up to 200lbs of tongue weight. With each of the Lectric 3.0 e-bikes weighing roughly 60lbs without the battery you will…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Measurements For Adjustable Width Trailer Hitch Receiver for RVs

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching