Mount-n-Lock SafetyStruts Universal RV Bumper Support Brackets - 4" to 4-1/2"
(172 reviews)
Price: $84.95
In Stock
Mount-n-Lock SafetyStruts Universal RV Bumper Support Brackets - 4" to 4-1/2"
Item # MO34VR
Retail:$97.27
Our Price: $84.95
You Save: 13%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (172)
- Q & A (0)
- Photos
Mount-n-Lock Accessories and Parts - MO34VR
- RV Cargo Carrier
- RV Bumpers
- Bumper Parts
- Mount-n-Lock
Beef up your RV bumper and boost your weight capacity to 400 lbs to safely haul your generator and other heavy cargo. Universal design mounts to most RV frames to reinforce your bumper and prevent metal fatigue that causes your bumper to detach.
Features:
- SafetyStruts reinforce your RV bumper so that you can carry generators and other heavy cargo
- Increases weight capacity to 400 lbs
- Helps prevent bumper detachment from your RV's frame
- Brackets mount to welded or bolted I-beam, S-beam, and single channel frames 6" or taller, and tube frames 4" or taller
- Included standoff spacers are required for welded or bolted I-beam frames shorter than 6" or any size double channel frames
- Optional spacer bars can be removed to fit around larger bumpers up to 4-1/2" wide
- Gives you more space on your frame for proper mounting
- Power-coated, galvanized steel construction resists rust and corrosion
- Installation requires some drilling - drill bits and mounting hardware included
- Made in the USA
Specs:
- Application: 4" to 4-1/2" RV bumpers
- Overall dimensions: 7-1/2" wide x 5" tall x 5/16" thick
- Weight capacity: 400 lbs when evenly distributed
- Quantity: 2 brackets
- Limited lifetime warranty
Note: Bumper weight capacities vary by manufacturer. Please be sure to verify the weight capacity of your bumper with the manufacturer prior to loading.
Universal Application
The included standoff spacers give you the flexibility to mount your SafetyStruts to most RV frames, making it nearly universal. This heavy-duty extension hardware is required for welded or bolted I-beam frames less than 6" tall and any size double channel frames where flanges stick out past your mounting surface. They also combat bolted-frame designs where bolts may obstruct your mounting surface. The standoff spacers won't be necessary if you have a welded or bolted I-beam, S-beam, or single channel frame 6" or taller without flanges, or a tube frame 4" or taller.
These all-steel brackets also have optional spacer bars that are in place to allow a nice, snug fit around your standard 4" RV bumper. They can be removed so that the brackets fit around larger bumpers between 4-5/16" and 4-1/2" wide, or if your bumper is bolted to the frame and the bolts interfere with the spacer bar.
If your RV's frame has less than 3" of mounting space, the spacer bars are the perfect solution to create that extra space to properly mount your SafetyStruts. Simply remove the spacer bar, flip it around, re-locate it to the outer part of your bumper, and secure in place with the included nuts and bolts.
1SNUHD Mount-n-Lock SafetyStruts RV Bumper Brackets - Universal Fit - 4" to 4-1/2"
Installation Details
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Too difficult to install
- Product did not meet expectations
Customer Reviews
Mount-n-Lock SafetyStruts Universal RV Bumper Support Brackets - 4" to 4-1/2" - MO34VR
Average Customer Rating: 4.7 out of 5 stars (172 Customer Reviews)
Beef up your RV bumper and boost your weight capacity to 400 lbs to safely haul your generator and other heavy cargo. Universal design mounts to most RV frames to reinforce your bumper and prevent metal fatigue that causes your bumper to detach.by: Nick03/20/2024
Well made, the kit includes the proper drill bits you need. Not really sure how much these add to capacity and I managed to crush the bumper a bit with a bolt on hitch and a Thule 5 bike carrier. Live and Learn !!
by: Jeremiah03/23/2024
Put theses on because I have a bumper mounted hitch to haul a cargo carrier. I think they definitely will help out in the long run
by: James 02/17/2024
JUST what I needed. It helps the bumper supporting a generator and rack that we haul with our 5th wheel.
by: Jay 08/28/2023
Purchased Item #MO34VR support struts. The kit comes with everything you need to install no matter your frame configuration, including 2 drill bits. That product did work out nicely and is a HUGE peace of mind product, totally worth the work and the price. I have a 24' Jayco Jayflight SLX with a 4" square bumper. After drilling through the frame I can assure you you'll need the struts if you're utilizing the GennyGo tray to carry a generator. Yes the bumper joints are welded solid but the metal is not nearly as thick as it may appear. Thinking "this is gonna take all day", a few seconds after starting the drill on the frame, I was through the other side. Buy the struts if you have a comparable rig. I know now why they make this product.
by: Christopher 07/22/2023
we have hauled 2 heavy ebikes on a bumper bike rack on travel trailer bumper
FL to CO
This product gives me piece of mind
It was kinda tough to drill through frame of rv but install was straight forward
by: Stephen12/23/2022
Shipped fast...very good quality...very easy to install both items...pleased with purchase...will continue to deal with etrailer
by: Charles08/16/2022
Don't waste your time or money on this. Now my bumper welds are cracked. If you want to carry more than spare tire on rear of camper bumper install a hitch on frame.
by: Jeffrey 03/24/2023
Purchased my second bumper support bracket and I’m very pleased with my choice. I appreciate the product and fast delivery from E Trailer
by: Greg 05/14/2023
Will see how these work long term. A bit of work drilling into the frame but I think they will hold the tray and generator without stress
by: Heather10/05/2022
I like the product, however the kit arrived with 2 missing locking nuts that were needed to tighten the bracket to the bumper.
Brooke M.
10/21/2022
Thanks for letting us know about this. I have already sent your information to our customer service team and they will be reaching out to you soon.
by: Jeffrey03/17/2023
Just opened the bumper support bracket. Seems to be heavy duty and looks like it’s going to do what I’m looking for. Thank you E Trailer for outstanding product.
by: Roger09/13/2022
I installed these because I was concerned about the stress that would placed on the trailer bumper from the spare tire rack and new Kayak verti rack. Installation was easy and since we have driven over 3000 miles across interstate 40 (alot of bad highway) and the bumper showed no signs of stress cracking at the welds. It was a simple addition that required no welding and the bolts that hold the bracket never loosened. I highly recommend this product, it gives you peace of mind and prevents your gear from snapping off down the road.
by: Keith04/03/2023
Quality and theory of the product is great but on my application it didn't work very good. I think for most applications it probably would work as intended.
by: Dan08/08/2023
Being just only 1 yr old it has rusted an awful lot already. The paint should have been done better. Maybe better QC
by: David03/16/2023
I have not had an opportunity to install the safety struts yet. It looks like it's doable with the parts provided.
by: Danny09/11/2023
Thank you so much for your help
by: Michael 09/17/2022
Still need to install. Like having extra support for 4” square bumper that cargo carrier attaches to.
by: Scott02/02/2022
Not the easiest to install but it just had to do with the design of my Sunseeker, in most cases it looks a lot easier. Can’t really knock it for that, it’s job was to reinforce bumper. I put a rack with two 40 lb propane tanks on mine so I needed something I knew would not fail, lest I find myself in prison for being negligent and blood on my hands . Worked like a charm, too bad I didn’t think of earlier as it allowed me to carry ample propane for full timing in colder climates. Rock solid is the important part, they work exactly as described.
by: Roger 06/12/2023
Good fit, easy to install product as de scribed
by: Hugh04/11/2022
Added the extra support we needed to our 5th wheel bumper to be able to haul our e-bikes.
by: Justin 12/16/2021
Etrailer is an awesome business. They get right on your order and keep you updated. The brackets seem to be of good quality and well packed. They literally come with everything, even drill bits. I would recommend!
by: Kevin03/28/2023
Parts were in stockband cheaper than on Amazon.
by: Joe 09/24/2022
You're my go to fory rv and trailer needs thanks.
by: Jim 07/05/2021
etrailer.com is awesome. Always carry quality products with fast processing and delivery.
25
172
Show More Reviews
See what our Experts say about this Mount-n-Lock Accessories and Parts
- Water Tanks in the Way of Adjustable Width Trailer Hitch Receiver 13703 The Adjustable Width Trailer Hitch Receiver part # 13703 isn't a fit for every trailer, it will work on some and others it won't due to items installed on the trailer such as stabilizer jacks, water tanks etc. Please note, this can differ from trailer to trailer so we always recommend looking at the undercarriage prior to purchase to ensure compatibility. That said, if the this trailer hitch won't work there are thankfully many of other options such as the Curt RV Bumper Hitch part # C19101...
view full answer... - Can The Mount-N-Lock SafetyStrut RV Bumper Support Brackets Be Used To Support Electric Scooters?The Mount-n-Lock SafetyStruts Universal RV Bumper Support Brackets - 4" to 4-1/2" # MO34VR will increase the RV bumper's weight capacity to 400lbs. This will fit 4" - 4-1/2" bumpers which looks to be what is on the 2017 Avenger RV. As long as the combined weight of the electric scooters and carrier does not exceed 400lbs, then you will be fine using this product. I attached a demonstration video to help you out.
view full answer... - What Side of Trailer Frame Does Mount-n-Lock SafetyStruts InstallNormally the Mount-n-Lock SafetyStruts Universal RV Bumper Support Brackets # MO34VR install on outsides of trailer frame. I attached an install video for this for you to check out as well.
view full answer... - Reinforcing A Bumper On A 2015 Keystone Laredo 336TGIf you want to use 24x64 etrailer Cargo Carrier for RV Bumper # e83YR and be able to use it's rated cargo weight capacity, you can use reinforcements like Mount-n-Lock SafetyStruts Universal RV Bumper Support Brackets # MO34VR. This will boost your weight capacity to 400 lbs so you can safely haul your generator and other heavy cargo.
view full answer... - Parts Needed to Carry 2 E-Bikes on the Back of a Travel TrailerAs long as your 2020 Sonic by Venture has a 4" bumper then this set up should work for you because the Mount-n-Lock SafetyStruts Universal RV Bumper Support Brackets # MO34VR will fit bumpers 4" to 4-1/2" and the Curt RV Bumper 2" Trailer Hitch Receiver # E-100 will fit 4" bumpers. The SafetyStruts will increase your bumper weight capacity to 400 lbs. and the Curt RV Bumper 2" hitch receiver can handle up to 350 lbs. in tongue weight which is what the bike rack and bikes would be impacting....
view full answer... - Bumper-Mounted Reinforcement Support Brackets For RV BumpersThe Mount-n-Lock SafetyStruts Standard RV Bumper Support Brackets - 4" to 4-1/2" # MO22FR and Mount-n-Lock SafetyStruts Universal RV Bumper Support Brackets - 4" to 4-1/2" # MO34VR. Use # MO22FR for standard bumpers and use # MO34VR for universal bumpers such as I-beams. These support brackets will increase your bumper's weight capacity to 400lbs.
view full answer... - Recommended Brackets For The etrailer RV Bumper Carrier On An I-Beam Frame Yes, you'll just need to use the Mount-n-Lock SafetyStruts Universal RV Bumper Support Brackets # MO34VR, which will come with spacers to fit your I-Beam frame. Page 2 of the attached instructions will go over how to install these brackets on I-Beam frames and help support your 24x64 etrailer Cargo Carrier # e83YR.
view full answer... - Is There Resource For Indicating Bumper Capacity on 2019 Chaparral For Bumper Cargo Carrier e83YRGood question, and there isn't an online resource that I was able to find so there are a couple of things you can do to find out the bumper capacity on your 2019 Chaparral so you can safely mount the cargo carrier you asked about, which is the following part number: - 24x64 etrailer Cargo Carrier for RV Bumper # e83YR The first and easiest is to check and see if there is a sticker or placard on the bumper indicating the capacity; this is somewhat common and is often on the back of the...
view full answer... - What is the Rear Bumper Capacity of a 5th Wheel Trailer and How To Increase ItIn order to determine the capacity of the rear bumper on any fifth wheel trailer you'll need to reach out to the trailer manufacturer as we don't have this information. That said, it's typically around the 200 lb mark. If you need/want more we do have a way to strengthen the rear bumper using the Mount-n-Lock SafetyStruts Universal RV Bumper Support Brackets part # MO34VR which increases the capacity to 400 lbs. In order to carry cargo and gear on the bumper, I highly recommend the etrailer...
view full answer... - Can a Trailer Hitch Be Installed on the Rear Bumper of a Heartland North Trail TrailerThe brackets which hold the rear bumper to the trailer frame are not always up to the task of hauling extra gear. In order to confirm we must recommend reaching out to the trailer manufacturer to see if and how much you can carry. If it's not rated or not high enough for what you need, we offer support brackets which will strength the connection between the bumper and frame. The Mount-n-Lock SafetyStruts Universal RV Bumper Support Brackets part # MO34VR is what I recommend. This would...
view full answer... - Installing Mount-n-Lock SafetyStruts to Tube FrameFrom how you're describing your set up, it sounds like your bumper is attached to a tube frame, and there is a way for you to install the support brackets, which are the following part number: - Mount-n-Lock SafetyStruts Universal RV Bumper Support Brackets # MO34VR What you'll need to do is drill small holes into the tube frame, and then use the included self-tapping bolts to mount the brackets. I have added cut outs from the instructions which show how the brackets install to a tube...
view full answer...
- Recommended Frame Mounted Trailer Hitch Receiver For Jayco Eagle 320RLDSI have another option that may work for you, but Unfortunately the brackets on the # 13703 cannot be flipped which my contact at Curt confirmed. The Adjustable Width Trailer Hitch Receiver for RVs, 22" to 66" Wide # C13704 can be bolted or welded to the bottom of your I-Beam frame, but is only fits frames up to 66" wide where the # 13703 fits frames up to 72" wide. If your frame is not wider than 66" then this would be your best bet, and has a 350lb tongue weight rating though you will...
view full answer... - Will The Mount N Lock RV Bumper Hitch Work On A 2022 Jayco Jay FlightThe Mount-n-Lock ShakeStopper for 6" RV Bumpers - 2" Hitch Receiver - 400 lbs # MO64VR will work work like a standard 2 inch hitch receiver when it comes to accessories. It has a 400 pound limit but that will mostly likely exceed your bumpers weight capacity and you will need to contact the manufacturer and give them your VIN to confirm the actual weight capacity of your bumper. If you have a 4 inch bumper you can use the Mount-n-Lock SafetyStruts Universal RV Bumper Support Brackets...
view full answer... - Does The Mount N Lock Bumper Hitch Receiver Lock On To Your BumperI talked to one of our install team members about the Mount-n-Lock ShakeStopper for 6" RV Bumpers - 2" Hitch Receiver - 400 lbs # MO64VR. The easiest option would be to replace the Coupling Bolts (shown below, threaded into Coupling Nut) with tamper-resistant bolts (further below). If the coupling bolts can’t be removed, the hitch can’t be removed. You will want a Grade 5 equivalent (120,000 psi tensile strength). Bumper weight capacities vary by manufacturer and by model. Even some of...
view full answer... - Does the etrailer Cargo Carrier for RV Bumpers Come with Support BracketsYes. The 24x60 etrailer Cargo Carrier for RV Bumper - Steel - Folding - 500 lbs # e99049 comes with the support brackets similar to the Mount-n-Lock SafetyStruts Universal RV Bumper Support Brackets - 4" to 4-1/2" # MO34VR. They're not branded from Mount-N-Lock, but they're essentially the same bracket and design.
view full answer... - Comparing Mount-n-Lock SafetyStruts MO34VR and MO22FRI would be happy to help! The only difference between the Mount-n-Lock Safety Struts # MO34VR and # MO22FR you were looking at is the hardware used to attach them. The # MO34VR uses nuts and bolts where the # MO22FR uses self tapping screws. Since both have the same 400lb load rating I recommend going with the # MO22FR as it will be the easiest to install. This will allow you to use the Ultra-Fab 2" Motor Home Trailer Hitch Receiver for 4" x 4" Bumpers - 3,500 lbs # UF35-946402 you were...
view full answer... - Does The etrailer RV Bumper Cargo Carrier Come With The Universal Safety Strut Kit The 24x64 etrailer Cargo Carrier for RV Bumper # e83YR is going to come with the Standard Supports # MO22FR. If you have an I-Beam frame that you'll be attaching to then you'll want the Universal Kit # MO34VR instead.
view full answer... - How Does The Mount-N-Lock SafetyStruts Universal RV Bumper Supports Install?Yes, you will use the Mount-n-Lock SafteyStruts Universal RV Bumper Supports # MO34VR to reinforce your bumpers frame on your 2022 Jayco Jay Flight SLX 242BHS Travel Trailer. These brackets will be installed by bolting through your trailers frame, and not the bumper supports. If you're also needing a trailer hitch, the Curt RV Bumper 2" Trailer Hitch Receiver # E-100 will work great, and will fit trailers that have a 4" square channel bumper. This hitch is intended for RV rated accessories,...
view full answer...
- Recommended Trailer Hitch for a Forest River Cherokee 284DBHThe Curt RV Bumper 2" Trailer Hitch Receiver, # E-100 is designed to fit standard 4" x 4" rear bumpers providing ability to tow a trailer up to 3,500 lbs. However, just because this component is rated for that does not mean the bumper on your RV is; you will need to confirm with manufacturer for spec on your Forest River Cherokee 284DBH. In addition, you will need to check legality of towing a bumper pull trailer behind a bumper pull trailer. Pulling a trailer behind a 5th wheel is frequently...
view full answer... - Availability of Replacement Brackets for etrailer RV Bumper Cargo Carrier e99049We do carry the replacement Mount-n-Lock SafetyStruts part # MO34VR for the 24x60 etrailer Cargo Carrier for RV Bumper # e99049 that you referenced.
view full answer... - How to Determine If Swagman RV 2-Bike RV Bumper Mount Rack is Right For Your ApplicationMany RV bumper manufacturers construct their product with a plastic cap or a hinged door instead of endcap, allowing bumper to be used for storage; apparently you have this type. Open that end piece to examine if the seam has spot welds (short welds at a number of separate points) or one continuous weld running the full length of the bumper; take note of the thickness of the metal while doing so. Some bumpers, frequently identified as heavy duty, will not have a weld seam at all but are...
view full answer...
- How Much Can the Rear Bumper Hold On A Vintage RV CamperI would not be able to speculate on the rear bumper capacity for any one particular trailer especially one this old but if you feel you will be exceeding this with the Curt RV Bumper 2" Trailer Hitch Receiver part # E-100 you can add supports, the Mount-n-Lock SafetyStruts Universal RV Bumper Support Brackets part # MO34VR. The other options would be a frame mount trailer hitch, the Adjustable Width Trailer Hitch Receiver part # 13703.
view full answer... - Are The Support Brackets Needed For A Trailer That Has Its Bumper Welded To The Frame?Since your bumper is welded to the frame, it should be very strong and likely won't need to use the support brackets # MO34VR for the 24x60 etrailer Cargo Carrier for RV Bumper # e99049. However, you'll want to verify that the load you're planning on carrying isn't going to overload your bumper. Bumper capacities will vary from each manufacturer, and I recommend contacting the manufacturer for your bumpers maximum weight capacity to ensure you aren't going to overload your bumper. If...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Video by:
Andrew K
Installed by:
Jeff D
Installed by:
Zach D
Video Edited:
Joshua S
Edited by:
Amanda M
Updated by:
Kristina F
Written by:
Adam Y
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
David B.
9/2/2022
This is not a common thing to happen, can you elaborate on the size of the bumper and age of the unit?