CE Smith Heavy Duty, Vertical Bunk Brackets - 90 Degree - Galvanized Steel - 6" Tall - Qty 2
(15 reviews)
Price: $44.69
CE Smith Heavy Duty, Vertical Bunk Brackets - 90 Degree - Galvanized Steel - 6" Tall - Qty 2
Item # CE10160GA-2
Our Price: $44.69
In Stock
Need help with installation?
Locate installers near meIn-stock alternatives that can ship today
- All Info
- Reviews (15)
- Q & A (0)
- Videos (1)
- Photos
CE Smith Boat Trailer Parts - CE10160GA-2
- Bunks
- Bunk Bracket
- 6 Inch Tall
- Galvanized Steel
- 5 Inch Wide
- CE Smith
Heavy-duty, rust-resistant brackets let you mount extra-large bunk boards on their sides to hold large boats. 90-Degree bases install on level trailer frames with 2 U-bolts (sold separately). Pre-drilled holes let you raise or lower your board.
Features:
- Heavy-duty brackets let you mount a bunk board on your boat trailer
- Ideal for big bunk boards, such as 3x8 or 4x8
- Stabilizes one end of the bunk board - additional brackets (sold separately) required for opposite end of board
- 90-Degree angle for vertical mounting onto level boat trailer frames
- (2) 1/2" Diameter U-bolts (sold separately) required for installation
- 3 Pre-drilled holes on each bracket let you raise or lower the bunk board during installation
- Secure board vertically on its side between the brackets with a 1/2" bolt (sold separately)
- Galvanized steel resists rust and corrosion
- Suitable for saltwater exposure
- Made in the USA
Specs:
- Quantity: 2 brackets
- Dimensions: 6" tall x 5" wide
- Distance between trailer mounting holes (center to center): 3-9/16"
- Distance between bunk board mounting holes (center to center): 1-1/2"
- Plate thickness: 1/4"
Galvanized Steel
Galvanized steel parts are hot-dipped in zinc after being stamped. This creates a coating that is typically 3 mil to 5 mil thick. This thick, all-around coating allows galvanized steel products to provide years of use without rusting or corroding.
10160GA C. E. Smith Heavy-Duty, 6-Inch, Vertical, 90-Degree Bunk Board Brackets
Video of CE Smith Heavy Duty, Vertical Bunk Brackets - 90 Degree - Galvanized Steel - 6" Tall - Qty 2
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for CE Smith Boat Trailer Parts - Roller and Bunk Parts - CE10160GA-2 Review
Today we're going to be taking a look at the CE Smith heavy duty vertical bunk brackets. These heavy duty brackets let you mount a bunk board on your boat trailer. These are ideal for big bunk boards such as a three by eight or a four by eight. They simply stabilize one end of the bunk board. Additional brackets are required for the opposite end of the board. Those are going to be sold separately.
Again, available at etrailer.com. These brackets provide a 90 degree angle for vertical mounting on to a level boat trailer frame. It will require two half inch diameter u-bolts for installation, one u-bolt per bracket. Those are available and sold separately at etrailer.com. I would recommend part number CE15283GA-2. You're going to have three pre-drilled holes on each bracket that's going to let you raise or lower the bunk board during your installation and then you can secure the board vertically on its side between the brackets with a half inch bolt.
That's going to be sold separately as well. These are galvanized steel so there designed to do a great job at resisting rust and corrosion. They are suit able for salt water exposure. They're made right here in the USA. You're going to get two brackets with this part number. Taking a look at the dimensions real quick, going edge to edge, it's going to measure five inches.
Overall height, it's going to be about six inches tall. The distance between the trailer mounting holes, that would be these holes right here, on center, it's going to be three and 9/16 of an inch. The distance been the bunk board mounting holes, again, there's three of those, those are going to be separated on center apart from one another. Each one looks to be an inch and a half apart from the other. Then the plate thickness is a quarter inch thick steel. That's going to do it for today's look at the CE Smith heavy duty vertical bunk brackets..
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
Customer Reviews
CE Smith Heavy Duty, Vertical Bunk Brackets - 90 Degree - Galvanized Steel - 6" Tall - Qty 2 - CE10160GA-2
Average Customer Rating: 5.0 out of 5 stars (15 Customer Reviews)
Heavy-duty, rust-resistant brackets let you mount extra-large bunk boards on their sides to hold large boats. 90-Degree bases install on level trailer frames with 2 U-bolts (sold separately). Pre-drilled holes let you raise or lower your board.by: Burt A.09/01/2016
Katie was awesome! My trailer is 15 years old & the part numbers I had are obsolete. Katie knows her stuff & was terrific about helping me get what I needed in a single order & not one part was wrong. She asked if I could give her some measurements, so I went out to the trailer with a measuring tape. She told me exactly what measurements she needed for each part & provided a current part number for each part I needed. She speaks very clearly & was happy to share her time & knowledge so I could get the parts across the country. I highly recommend dealing with this company. Thanks, Katie.
by: Joe Lasserre06/28/2017
Refurbished trailer one 1 year with all parts from etrailer , could not have been any better
pleased with service or products purchased. Will not hesitate to order again for all my trailer needs !! Joe
by: Gordon07/11/2019
All aspects of this transaction were top drawer excellent: the brackets themselves are heavy duty
pieces perfect for my application, and they even came predrilled and exactly accommodated the attached hardware without any additional drilling. Now that's what I call service!
by: Todd12/23/2017
Sturdy with a good galvanized coating. Its holding up well in our coastal environment.
by: Mike 12/08/2021
The bunk brackets we ordered were just the thickness we had wanted. James EXT.79503 was very helpful in finding us just what we needed. Thanks so much!
by: keith01/07/2015
These brackets were exactly what I ordered. I haven't installed them yet, but I'm sure they'll work just fine. I found similar brackest for much more money at other sites! Shipping was very quick and free!!!
by: Michael 10/11/2022
They are exactly what I needed. Heavy duty for a solid mount.
by: Jason 08/28/2020
Ordered these on 2 day shipping. They showed up in one day! Product was very heavy duty and u bolts fit perfect. Exactly what the description said!
by: Marshall 08/17/2021
Great Service
by: Agustin02/02/2018
Good.
by: Ron 07/16/2020
perfect
by: Carl03/23/2022
by: WP05/07/2021
by: Dan 07/12/2021
by: Debbie02/04/2022
15
15
See what our Experts say about this CE Smith Boat Trailer Parts
- Could CE Smith Bunk Bracket be Adapted to Fit Smaller BracketSince there isn't a smaller bracket setup for the CE Smith Heavy Duty, Vertical Bunk Brackets # CE10160GA-2 best option might be to use spacers to take up the extra space and provide the tighter fit.
view full answer... - Can I Weld the CE Smith CE10160GA-2 Heavy Duty, Vertical Bunk BracketsBecause the CE SMith Heavy Duty, Vertical Bunk Brackets # CE10160GA-2 are galvanized steel, I don't recommend welding them because of the inherent issues that come along with welding on a coated steel. These are designed to be secured to the trailer frame using U-bolts like the # CE15283GA-2, so I do recommend using that method. I've gone ahead and linked our entire selection of u-bolts in case you find that you need something a bit longer, as well.
view full answer... - Recommended Removable Inflatable Boat Carrier For Use On a Utility TrailerI have a couple options for you to carry your 10' inflatable boat on your 12' utility trailer as there is not a specific kit we carry that has everything. First you can mount the CE Smith Heavy Duty, Vertical Bunk Brackets # CE10160GA-2 to your trailer decking. Then you can mount the Slotted Swivel Bracket # HP55FR for attaching your Bunk Boards # CE27840. You will need 2 sets of the vertical brackets and 4 swivel brackets to mount the 2 bunk boards. The Vertical brackets will need to...
view full answer... - Availability of Heavy Duty Brackets for Large BoatIt looks like you are looking for a heavy-duty, rust-resistant brackets that will let you mount extra-large bunk boards on their sides to hold large boats with four pre-drilled holes let you raise or lower your board. Take a look at # CE10161GA-2. The dimensions are 6" tall x 5" wide. If these are the dimensions you are looking for then these brackets will work well for you.
view full answer... - Which Replacement Bunk Brackets For Boat TrailerIf you are wanting to use vertical bunk brackets like the CE Smith Heavy Duty, Vertical Bunk Brackets - 90 Degree - Galvanized Steel - 6" Tall - Qty 2 # CE10160GA-2, I recommend using them on the front and rear of the trailer. You will also need CE Smith U-Bolts - Galvanized - 3-13/16" Long x 3-1/16" Wide x 1/2" Diameter - Qty 2 # CE15283GA-2 to secure the brackets to your trailer frame. If you have a lighter boat and would rather have the bunk brackets that allow you to angle the bunk...
view full answer...
Do you have a question about this Boat Trailer Part?
Info for this part was:
Written by:
Lindsey S
Expert Research:
Jameson C
Installed by:
Cole B
Updated by:
Wilson B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.