LED Boat Spotlights - Surface Mount - Spot and Flood Beams - Waterproof - 12V - Qty 2

Video Transcript for Review of TecNiq Boat Lights - Spotlights - TN45ZR

Hello everybody, this is Jeff at etrailer.com. Today, we're gonna take a look at the TeqNic surface mount LED boat spotlights with the secondary flood beam. And it is for a quantity of two lights. Now, these are waterproof LED boat spotlights which produce 900 lumens of bright white light each. These are great for docking lights and spotlight applications on emergency and fire boats. It does have a primary spot beam function that'll cover 30 degrees from the mounting surface, and it also has a secondary flood beam function which will cover 120 degrees from the mounting surface.

Now, at the end of this video, I'm gonna hook this up to some 12 volt power to show you how bright these are in the beams. It has a nice sealed waterproof housing and lens unit. They do use premium LED's, which are energy efficient, long-lasting and vibration-resistant. They're rated for up to 50,000 hours of operation. They do use military-grade construction of the circuit boards, they used a yurethane potting which offers better protection than the common epoxy potting.

And if you notice, they have the nice durable 316 stainless steel housings on them with the UV resistant lenses. It is a clear lens over six wide LEDs. These are compatible with the 12 volt DC system, and they are a surface mount installation. There's no cut outs required. If you notice, it does come with the foam gaskets, which will create a nice whether-type seal and protect your boat's finish.

You can see it is a hard wired application, it is a two wired design, has a power wire and a ground wire. And the wire length on each light is about nine inches. A few specs again, the quantity is two spotlights. The lights dimensions, if we do the overall length, one end to the other, it's right at eight inches, height of it or width of it is about four inches. And the height of it when it's installed is about three quarters of an inch.

The distance between the mounting holes, there's a mounting hole here and one here, center to center is seven and a quarter inches. And the power draw on this slide is .45 to .55 amps per light. So again, what we're gonna do now is we're gonna hook this up to some 12 volt power. And once we get it all hooked up that way, I'm gonna go ahead and turn the power on, and you'll be able to see there is your light that's coming on. And then I'm gonna go ahead and turn off the overhead light. And with the overhead light off, you can see how bright the light is. And as we mentioned, it gives you a primary spot beam, which will cover 30 degrees from your mounting surface and in a secondary flood beam, which covers 120 degrees from the mounting surface. If I just zoom out, show you the area it lights up, pretty bright light. And that's just from one of the lights. I'll go ahead and turn back on the overhead lights, go ahead and turn off our power. But that should do it for the review on the TeqNic surface mount LED boat spotlights with the secondary flood beam..