etrailer Ball Mount Kit - Super Extra-Long - 3/4" Rise or 2" Drop - 6,000 lbs
(1315 reviews)
Price: $101.11
etrailer Ball Mount Kit - Super Extra-Long - 3/4" Rise or 2" Drop - 6,000 lbs
Our Price: $101.11
Need help with installation?
Locate installers near meIn-stock alternatives that can ship today
- All Info
- Reviews (1315)
- Q & A (0)
- Photos
etrailer Trailer Hitch Ball Mount
- Fits 2 Inch Hitch
- Fixed Ball Mount
- Drop - 2 Inch
- Rise - 1 Inch
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- 6000 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
- Steel Shank - Gloss Black
- Steel Ball
2" Drop, Super Extra-Long Ball Mount Kit
Features:
- Works with 2" x 2" hitch receivers
- Kit Includes:
- (1) Extra-long ball mount with 3/4" rise or 2" drop (# 80232)
- Capacity: 6,000 lbs GTW and 600 lbs TW
- Extends ball 16" from hitch pin hole
- (1) Convert-A-Ball Interchangeable Ball System with a 1-7/8" and 2" hitch ball (# 901B)
- Ball capacity: 10,000 lbs GTW
- (1) Pin and clip (# PC3)
- (1) etrailer storage bag (# ETBMB)
- NOTE: Extra-long ball mount will not fit in the storage bag
- (1) Extra-long ball mount with 3/4" rise or 2" drop (# 80232)
EBMK2EL etrailer Ball Mount Kit - Super Extra-Long - 3/4" Rise or 2" Drop - 6,000 lbs
Item # EBMK2EL
Customer Reviews
etrailer Ball Mount Kit - Super Extra-Long - 3/4" Rise or 2" Drop - 6,000 lbs - EBMK2EL
Average Customer Rating: 4.8 out of 5 stars (1315 Customer Reviews)
2" Drop, Super Extra-Long Ball Mount Kitby: John08/24/2023
Hitch was correct and it had all its parts. The only negative was the bag they give you to carry the hitch in - doesn’t fit in the bag, the hitch is too long.
by: John11/11/2020
Very high quality and just what I needed to allow tailgate to be opened when my trailer is hooked up.
by: chris03/25/2011
Not sure why they sent the bag. It's not big enough for the extra-long ball mount.
by: Scott Michael09/18/2011
High quality products at a great price! Easy to follow instructions and an easy install. Great experience!
by: James 04/30/2024
by: Steve 01/15/2023
Haven’t used it yet, but looks good. I’m not sure what height offset I need, so this kit gives me several options, plus two ball sizes. Really good value.
by: Shelly M09/02/2017
I installed the draw tite hitch onto my brand new 2018 Subaru outback. I'm 68 years old, not as strong as I was, but proud to say I did the job all by myself in about 4 hours. Here are some tips you may find useful.
Watch the video-it’s pretty good.
I had difficulty getting the exhaust system down and worried about getting it up again from the moment I got it down...read on-help will follow.
I bought a stepup drill bit which worked great for drilling the hole in the chasis.
I clamped the hitch onto a floor jack, then rolled it and raised it into position.
Used metal shears to easily cut out the heat shield as per the video.
Your inclination will be the screw the fishing tool provided all the way up the carriage bolt. That won’t work; just screw it on to the tip of the bolt.
I couln’t get the exhaust hangars in place even after lubricating them with wd-40. I dropped the rubber hangars into undiluted liquid car wash soap which made them much more slippery than the wd-40. After that the rubber hangars slipped into place pretty easily-that’s my best tip.
Finding the electric connection plug for the wiring harness was almost as hard as installing the hitch. I was very happy with how the job came out. Good luck.
by: Ron M.07/31/2022
Ball mount kit arrived quickly (within a few days) upon placing order online. Parts were shipped loose in box and bottom flap on box was open when received. Fortunately, all the parts were still in box and in good condition. Kit includes ball mount hardware I need to pull trailers with different hitch heights.
by: Chip03/22/2024
Nice heavy duty kit. Note that the mount is drilled for the larger 1 1/4" shank diameter. The balls match of course.
by: Robert02/11/2024
Great product. Definitely easier with 2 people to lift up the hitch for final installation
by: Jonathan05/02/2024
I received the package but the drop was not in the box.
by: Greg09/08/2023
I ordered the Ball Mount Kit for 2" Hitches. My order was delivered fast, but it only came with one ball where two were specified. George and Paula got on it immediately and I received the missing ball in just 3 days. Nice recovery team! I would have given five stars for the product quality, service, and delivery had it been a complete order from the start, but that said, great service!
by: Rob07/17/2023
This is the one thing I ordered with my hitch, wiring harness, etc. that I'm not sure about. Either the balls are slightly too small or the pins are too small for the hitch I have, so when I haul something, it makes an almost rattling noise. Super annoying! I also haven't needed both size drops. But if I ever do, I'm sure I'll be glad I got it.
by: Frank W.03/02/2021
Thank you etrailer for the quality products I received early last year. We needed a trailer hitch to install on our Subaru Forester for our move from Gig Harbor, WA to Spokane. We received the hitch hardware including the tow bar and electrical harness. The entire process took 4 hours. The installation process went off without a hitch (bun intended) using detailed videos I found online.
Thank you etrailer.
by: Deb 05/14/2024
It did the trick, although it is starting to rust.
by: Adolfo10/30/2017
The customer service was polite and knowledgeable in their recommendations. The package delivered complete and without incident and install was a breeze. the only reason for the four stars instead of five is for the competitiveness of their pricing.
by: Matt Mercer07/31/2023
My experience sucked with this company. I ordered 1 unit but received and was billed for 2 units. I have 1 car with a hitch and would never need 2. I then attempted to get a refund and return the extra unit I was billed for. Unfortunately. the cost to return the unit by ANY method of shipping available was more than the cost of the unit itself.
Will never use this site again.
by: Wes A01/18/2017
I am a frequent etrailer customer, the variety and availability of quality components and excellent service is what keeps me coming back. When trailering I strive to be as safe as possible, which is why I chose this heavy duty ball mount to tow my 10,000# car hauler trailer. With this very robust piece, I can be assured that the connection between my truck and trailer is secure.
by: Allan W.03/22/2015
I purchased the etrailer.com 2-3/4 " Rise or 4" Drop Ball Mount Kit, Curt Trailer Hitch Receiver and Twist-in 7-Pole RV-Style Trailer Connector for my 2011 Chevy Silverado. Quick Delivery! All the necessary parts arrived in perfect condition. Directions were spot on and the instructional videos were great.
by: Ramon 08/10/2022
Great products, Fantastic service and very fast shipping. We are already placing another order.
by: Joe10/02/2023
I probably overkilled with tis kit, but I am ready for just about anythng now! I was somewhat surprised to find a 250 ft-lb requirement on the ball! Best I could do was use my 18" pipe wrench and stand on the thing- I probably got to 250- or more!
by: Vic 07/18/2023
The drop ball mount is the perfect size for my Jeep. The versatile hitch balls are convenient. Thank you for putting together a great kit, providing excellent communication, and delivering it quickly.
by: Rick 06/24/2023
This item gave me the extra clearance that I needed when using my cargo carrier. Etrailer has everything that I needed for new trailer hitch.
by: Ted09/08/2018
Good value and having the 2 options saved us because the higher rise ball mount did not work with the accessory bike rack and I was able to go with the lower rise instead.
by: Terry 07/14/2023
This kit is exactly what I needed. I have two trailers one with a 1 7/8 and the other is 2. This allows me the option of just swapping out hitches. The bag also can hold the 7 pole to flat 4 adapter.
25
1313
Show More Reviews
See what our Experts say about this etrailer Trailer Hitch Ball Mount
- Will the CURT Hitch # 13044 Install on a 2006 Diesel Jeep Liberty with Skid Plate and Tow HookTo install this CURT Trailer Hitch Receiver # 13044 on your 2006 Jeep Liberty diesel you will need to remove the recovery hook and temporarily remove or loosen the bolts that attach the skid plate to the rear of your vehicle. Check out the installation instructions and installation video I attached. Since you will be removing the recovery hook you may be interested in purchasing a Trailer Hitch Receiver Mounted Forged Tow Hook # TR63044 as a replacement. This would install into the hitch...
view full answer... - 6 and 7-Way Trailer Connector Mounting Box Recommendation for Draw Tite Hitch on 2004 Jeep LibertyI spoke with my contact Draw-Tite and he informed that the cross tube is 2-1/2 inch by 2-1/2 inch. Because of this I would recommend you use a 6 and 7-Way Trailer Connector Mounting Box # 18159. I attached installation instructions and an installation video for the # 75128 for you to check out also. To complete your towing setup you may be interested in the following products: etrailer Ball Mounts # EBMK2EL Tow Ready Custom Fit Vehicle Wiring # 118524 (installation instructions) Brake...
view full answer... - Mounting Swagman XCS to the Back of Jeep WranglerSwagman Traveler XCS # S64664 will definitely work mounted behind your motorhome while you're towing your utility trailer or your Wrangler. Just make sure your tow bar is long enough so you won't have any issues. From the back of the Traveler XCS to the furthest point is 20" far and 17-3/8" high. You can use those measurements to check if there's enough clearance between the bike rack and the towed vehicle. As for mounting it behind your Wrangler, you would first need a ball mount shank....
view full answer... - Recommended Trailer Hitch for 2022 Volvo XC60Yes, we do, I recommend the Curt Trailer Hitch Receiver, # C92WR. This is a Class III hitch with a 2" receiver that uses existing holes in the Volvo's frame for a no-drill installation. This is a hidden design meaning that only the receiver is visible once installed. If you intend to use for towing and not just a bike rack or other accessories, I suggest the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236. For a ball mount I suggest the etrailer Ball Mount...
view full answer... - Which Years of the Jeep Liberty Will Take Curt Trailer Hitch 13044Sorry to hear about your 2005 Jeep Liberty going to that used car lot in the sky. As for Curt trailer hitch # 13044, it fits the 2002 to 2007 Jeep Liberty. Whomever buys will also need some accessories if they plan to tow. You can point them right to us! I recommend etrailer ball mount kit # EBMK2EL. It comes with a ball mount, interchangeable ball set, a pin and clip, and a storage bag. And for trailer wiring use # 118524. I have linked instructions and videos for the hitch and wiring.
view full answer... - Recommended Rear Suspension and Parts Needed for Truck Bed Camper on a 2008 Toyota Tundra 8ft BedI can help you outfit your 2008 Toyota Tundra Limited for your camper. To help with the rear sag of the Tundra, I recommend the RoadActive Suspension # RAS4611TD, because of its adjustability and low maintenance. This kit is compatible with 4 wheel and 2 wheel drive models. There are a couple components you will need for your truck camper to mount to your truck properly one of those components will be Frame Mounted Tie-Downs. The TorkLift Custom Frame-Mounted Camper Tie-Downs for your...
view full answer... - Trailer Hitch and Wiring for a 2002 Jeep LibertyYour 2002 Jeep Liberty is suitable for light duty towing and installing a trailer hitch, wiring, and using the appropriate accessories would be the way to go in my opinion. Also, if you go with a hitch you will be able to use other accessories in it after the move such as bike racks or cargo carriers. Check the Jeep owners manual for its towing capacities before towing. Curt trailer hitch # 13044 is the most popular option for your Liberty. I have included a link to a video showing installation...
view full answer... - Can I Use A Hitch Extension w/ Curt Trailer Hitch # C13095 On a 1995 Nissan PathfinderWhen using a hitch extension it will reduce the tongue weight capacity of the Curt Trailer Hitch, # C13095, by 50 percent. The tongue weight capacity of that hitch is 500 lbs, so if you use a hitch extension it will be reduced to 250 lbs. So you will not want to use a hitch extension when towing a trailer. For towing you could use a extended ball mount like the Ball Mount Kit, # EBMK2EL. This will extend the hitch ball 11-1/4 inches from the hitch pin hole and you will not lose the weight...
view full answer... - Is Extended Hitch Adapter For 2014 Dodge Ram 2500 Towing 32 Ft Jayco TrailerUsing a hitch extender will reduce the towing capacity of the hitch by 50 percent. An extended ball mount kit we offer like part # EBMK2EL, has a towing weight capacity of 6,000 lbs. We do not have an extended ball mount that would work for your 2014 Dodge 2500 and your 32 ft Jayco Trailer.
view full answer... - Class III Draw-Tite Trailer Hitch Recommendation for a 2005 Jeep LibertyThere is a similar trailer hitch that will fit your 2005 Jeep Liberty, but the Draw-Tite Trailer Hitch, # 75578, will only fit 2008 to 2011 Jeep Liberty models. The comparable trailer hitch from Draw-Tite for your 2005 model is # 75128. I have included a link to the installation instructions and a video showing a typical installation for you to view. If you plan on doing some towing, I recommend the etrailer Ball Mount Kit, # EBMK2EL. It includes a ball mount, interchangeable ball system,...
view full answer... - Parts Needed to Tow a Trailer with a 2017 Ford Explorer with 2.3L Eco-Boost Engine I'll start out by saying that you're always limited by the lowest rated component in your towing setup, even if certain components are rated for higher weights; I believe the "Class II Trailer Tow Package" refers to factory installed towing components that likely include a transmission cooler (and possibly other parts), and not the Class rating of the hitch. It should also be noted that the available hitches for the 2017 Ford Explorer are all Class III hitches, which technically are rated...
view full answer... - Trailer Hitch and Towing Kit Recommendation for a 2020 Chevy Express Shuttle BusThe only trailer hitch available for your 2020 Chevy Express Van Shuttle Bus is the Buyers Products 2" Hitch Receiver # 3371801102. Even though this is the only option, it is still really good quality and is a semi-custom installation as you may need to do a little drilling depending on the design of your frame. To tow a trailer you also need wiring and a ball mount. For wiring I recommend the T-One # 118392 which tees in behind your tail lights, and for a ball mount I am attaching out...
view full answer... - Recommended Wiring Harness for 2003 Jeep LibertyYes, Hopkins 4-pole trailer wiring harness # 42475 is a confirmed fit on the 2003 Jeep Liberty and is one of the three such wiring products we offer for your Jeep. However, based on our experience with all the brands of wiring products we have for your Liberty I do recommend a different option, the T-One Vehicle Wiring Harness # 118524 from Tekonsha. I recommend this product over both other options (all are shown on the linked page) because we know Tekonsha products to be very reliable...
view full answer... - How Long is Ball Mount in Super Extra-Long etrailer.com Ball Mount Kit Hey the etrailer.com Ball Mount Kit # EBMK2EL sure will give you that couple more inches you need to fit your 2018 Ford F-150. You mentioned that your current shank measured 10-1/2" from the center of the hitch pin hole to the center of the hitch ball hole. Well, the ball mount kit # EBMK2EL is super extra long, measuring 16"! Sixteen! This kit also comes with a 1-7/8" and 2" hitch ball, pin and clip, as well as storage bag for your convenience.
view full answer...
- Ball Mount Kit for Tailgate Clearance on Ram 3500Yes it will. The etrailer.com Ball Mount Kit - Super Extra-Long - 3/4" Rise or 2" Drop - 6,000 lbs # EBMK2EL extends 16" from the hitch pin hole, which is more than enough for you to lower your Ram 3500's tail gate with a trailer connected. I've added a link to a video review of this kit for you to check out.
view full answer... - Is it Safe to Use Extended Ball Mount to Tow a Trailer for Extra Clearance for Trunk Mount Bike RackThe use of an extended ball mount like the etrailer Ball Mount Kit - Super Extra-Long - 3/4" Rise or 2" Drop - 6,000 lbs # EBMK2EL is perfectly safe and a good solution for extra clearance. This extra-long ball mount extends the ball 16" from the hitch pin hole so as long as that is the clearance you're looking for you're good to go. I am assuming you have a trunk mounted bike rac; the problem people typically run into comes from trying to use extenders and adapters in order to tow their...
view full answer...
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
Expert Research:
Jeffrey L
Updated by:
Wilson B
Updated by:
Mike S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.