To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replaces the Velcro Brand fasteners on TruXedo Lo Pro or Original Edge tonneau covers.
Features:
Specs:
Notes:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the Replacement Truxedo Shur-Bond Velcro Brand Fasteners for six and a half foot beds. These strips are going to replace the Velcro Brand fasteners on your Truxedo Lo Pro QT, and the original Truxedo Edge Tonneau Covers. They slide easily into the rails for an easy installation, so no adhesive backing, they just slide in. They're going to provide a nice, tight, secure fit. Again, a quick and easy install. You will notice that in the packaging, you're going to find three drive rivets. These are included.
These are only to be used when installing the Shur-Bond strips on the original Truxedo Edge Tonneau Cover, so you do not need to use these for the Truxedo Lo Pro QT. Each strip is going to measure eighty inches long. The overall width is one and five sixteenths of an inch wide. The actual Velcro portion measures one inch wide. You're going to get two Velcro Brand fasteners, both are included, and please keep in mind that the fastener is designed to replace the hook piece, which attaches the Tonneau cover to the truck rails. The mating loop piece, the piece that mates to this, is already attached on your Tonneau cover. That's going to do it for today's look at the Replacement Truxedo Shur-Bond Velcro Brand Fasteners..
Average Customer Rating: 4.9 out of 5 stars (872 Customer Reviews)
Replaces the Velcro Brand fasteners on TruXedo Lo Pro or Original Edge tonneau covers.
Great. Kind of tricky to install but I found a technique. Used a small hammer and a wedge to keep pushing it down the tracks. It fit perfectly and the quality of the material was excellent.
This item resolved the issue with my 7-year-old tonneau cover. Easy to install, good price and great description in verifying this is for my vehicle. Always nice working with etrailer for online purchases.
Product and quality was better than expected. It was a perfect fit, with easy to follow instructions. Recommend 5 stars. Teddy A
Works great the tonneau cover does not flap around in the wind.
Bought this replacement Velcro for my 2013 F150 tonneau cover as the factory Velcro became old and worn out. The shur-bond Velcro replacement worked without needing to replace my entire cover. This product worked better than expected, a year later and it still holds tight.
Very easy and simple to.Pulled my end caps off slid the old ones out cut the new ones to length slid back in replaced the end caps took 15 minutes. My cover doesn't flop in the wind anymore stays tight.
Good quality product. Direct replacement for worn out original. Easy to follow instructions included. Very quick delivery.
Very good product with easy to follow instructions. Just what I was looking for.
Ordered replacement Velcro for my TruXedo topper, after a e-mail to customer service to verify part number. My order arrived in 2 days with standard shipping, replacing the Velcro on the bed rail took about 5-6 minutes. Each piece of Velcro is a couple inches long than the rail so you can trim to fit exactly as you want. Product is working great, it's allowing me to really pull the top cover tight again and secures it just like when it was brand new! So, if you want to stop your cover from flapping in the wind as you go down the highway, order the Velcro replacement!
Kendall S.
6/16/2018
Velcro is still performing like new after a year!
Excellent customer service!
David
4/18/2024
Fantastic!
Super easy install...remove the end caps and set screws and the strips just slide in/out. You do have to 'trim to fit' but it's super easy and would rather trim then have them to short. This Velcro is WAY better than the original stuff that I replaced...huge improvement in function of the tonneau cover. Overall this saved me from purchasing a completely new cover or topper.
Great O.
10/1/2021
Still working great. I would recommend this to anyone that is frustrated with the Velcro on your tonneau cover.
It's a great product and still looks brand new. The only reason for 4 stars is it took A LOT of elbow grease to get it in the track. A lot.
After one year, the replacement velcro is still holding like new after many miles on the highway.
I am very pleased with the velcro strips that I purchased. It only took about 5 minutes to replace them on both sides of my pickup. I took it for a test drive immediately and the tonneau cover stayed in place the way its supposed to.. I should have replaced the strips a long time ago.. shipping was very quick and product is exactly as advertised and price was very reasonable. I have purchased from etrailer before and will do it again if needed.
Duane
7/4/2023
After using these velcro strips for about a year I can still same thing..... I should have replaced them sooner. They still work great and they get used alot.
The product I ordered works good and it was very easy to install. These Velcro strips fixed the problem I had holding my truxedo roll tarp in place.
Etrailer was very fast in processing my order and shippping it to me. This is the first time I ordered something from this company and I will be ordering other parts as needed.
Barry Z.
6/2/2020
The Velcro is still working good even after 1 year. I haven’t had no trouble with it at all.
I think that the product itself is a great product. Didn't have my truck with me when I ordered this. They said this would fit my 2017 GMC truck and I need 1 in not 1-5/16. I wish I would have measured so I guess it is my fault but I trusted them that it was what I needed. Will have to return and get the correct size but it says it is out of stock. I will try again when the correct item is available even though it says it will not fit my truck but the measurements are correct.
Replacement was easy and worked great.
This replacement part involving the Velcro for my truck bed cover has been fantastic. Definitely a five star and it's holding strong.
This brought an old cover back to life. Easy to install and very happy with the result! Would recommend this product!
Bryan
1/10/2024
Working great and holds up well. I would recommend this product. Brought an old cover back to life!
Have been wanting the velcro repaired and didn't know you had replacement strips until I googled and found a clip on utube showing your product. I was thrilled because I was planning to use sticky side velcro and with our heat in the Carolina I always have a mess of glue running. Your replacement was the option avoiding total replacement of my truxedo cover. It's 13 years old and still good to go as I treat the cover like a convertible top. When I originally purchased my low profile it was near $200.00 less than the cost today. As you can see by my 2010 Dodge Ram things will last and look good if you do preventive maintenance. Thank you for your excellent service.
It was exactly what I needed and at a great price! Delivery was fast and everyone was so easy to work with.
The Velcro strips worked better than the original ones. The cover is just as tight as it was when brand new. It came two days earlier than expected. Great service.
Not holding up
Worked perfectly for my 2018 F150 factory tonneau cover.
Great company to deal with! No issues ordered the piece and it works better then when it was new in 2010.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
John
5/12/2024
Still holding on and working like new .