Replacement Tailgate Top Seal for Pace Edwards Retractable Tonneau Covers
(100 reviews)
Price: $58.63
In Stock
Replacement Tailgate Top Seal for Pace Edwards Retractable Tonneau Covers
Item # PE99CV
Our Price: $58.63
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (100)
- Q & A (0)
- Videos (1)
- Photos
Pace Edwards Accessories and Parts - PE99CV
- Tonneau Covers
- Seals and Gaskets
- Tailgate Seal
- Pace Edwards
Replaces the seal between the top of your tailgate and your tonneau cover. Fits your Pace Edwards Bedlocker, Full-Metal, JackRabbit, or Switchblade tonneau cover.
Features:
- Replaces the seal between the top of your tailgate and your tonneau cover
- Fits your Pace Edwards Bedlocker, Full-Metal, JackRabbit, or Switchblade tonneau cover
- Made in the USA
TRPT1459-1 Replacement Over the Top Tail Gate Seal for Pace Edwards Bed Locker, Full Metal, Jack Rabbit, or Switch Blade Truck Bed Cover
Video of Replacement Tailgate Top Seal for Pace Edwards Retractable Tonneau Covers
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Pace Edwards Tonneau Covers - Tailgate Seal - PE99CV
Hello everybody, this is Jeff at etrailer.com. Today we're going to take a look at this replacement tailgate top seal for the Pace Edwards Retractable Tonneau Covers. This part will replace the seal between the top of your tailgate and your tonneau cover. It is designed to fit the Pace Edwards Bedlocker, the Full Metal, the Jack Rabbit, or the Switchblade tonneau covers. It is a rubber material. It is made in the USA.
I'll give you the length and the width. If you put a tape measure on the overall length, it's going to be right at 63 inches. The width on it is going to be right at 1 1/2 inches wide. And I just wanted to zoom in just to show you a cutaway of the end, just to give you an idea of what the design of the seal looks like. There's the end cutaway.But that should do it for the review on this replacement tailgate top seal for the Pace Edwards Retractable Tonneau Covers..
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Replacement Tailgate Top Seal for Pace Edwards Retractable Tonneau Covers - PE99CV
Average Customer Rating: 4.6 out of 5 stars (100 Customer Reviews)
Replaces the seal between the top of your tailgate and your tonneau cover. Fits your Pace Edwards Bedlocker, Full-Metal, JackRabbit, or Switchblade tonneau cover.by: Mark 03/31/2023
Package was delivered in a timely manner. It appears to be what I needed. I have not installed it yet, I’m looking for installation directions online. I will follow up once it is installed.
by: Eugene 10/08/2022
The replacement tail gate weather strip works better than the original at stopping water from entering the bed of my truck it also seems to be stiffer than the old one which helps it maintain its shape.
Eugene H.
10/9/2023
After a year the weather strip is holding well. There has been no leaks and the strip continues to keep its shape. Very durable.
Mike L.
11/2/2023
@EugeneH We're glad to hear that!
by: Ralph04/06/2024
Quick delivery and the seal worked perfectly on my Switchblade tonneau.
by: Jose 01/02/2024
Perfect fit. It’s exactly the same part I am replacing on my tonnneau cover. etrailer customer service is top notch.
by: Brandon08/22/2022
So I bought this because I have a retractable bed cover from another company that decided to discontinue my model and stop making any replacement parts. I looked at the photos and design of this top seal and thought it was worth a shot. I must say the quality of rubber is very good compared to the last. This feels much thicker and better quality. I had to do some modifications by shortening it a few inches, but if you look at the photo it fits just fine. Thanks for fast shipping and a good product.
by: Kevin03/21/2024
It took close to a month from ordering to actually receiving the part when I purchased it said 7-10 days. Not 30
by: Chris 03/20/2024
item as described
by: Jim 02/03/2024
Product was a perfect fit, easy ordering and good follow up and service
by: James 02/03/2024
Kind of expensive for a piece of seal but no surprise in this Biden world
by: Andy 03/11/2024
Thank you, fast shipping!
by: Reginald 02/09/2024
Had to reorder due to packaging mistakes
by: Robert 02/07/2024
Everything was great! Very good quality!
by: Alan 02/07/2024
It's nice to get parts and not have to buy whole top.
by: Stephen 02/05/2024
Easy to install and high quality part
by: Peter07/04/2023
I received the part sooner than expected and the rubber trim fits perfectly. Thanks for a great replacement
by: Ken 10/14/2023
The part came promptly and fit perfectly. I am very satisfied with the service and quality of the product.
Thanks.
by: Fernando05/27/2022
Good quality material, only thing was had no instructions on what side goes up, but other than that the installation was a breeze .
by: Dave12/16/2022
I had no issue with the product itself, just the way it was shipped and lack of installation help.
Came rolled up in small box. Had some deep creases, even after installing. Hoping they work their way out.
There should be some type of in instructions on how to get Jackrabbit rail end caps off. This would have made the installation a minute or two. I never did figure out how to remove the end cap. So, I had to go to Plan B which was a painful hour plus to get the seal in the channel.
by: John 06/11/2023
Fit into slot on cover like it was supposed to! VERY PLEASED AS SALES PERSON SAID "IT MIGHT FIT" so for only $50 give it a try.My cover was old so he was not sure it would fit old cover
It was a little difficult to slid into slot because lack of room along edge of cover and rail.
by: Esequiel04/20/2023
Ordered on a sat and was in my hands on Wednesday for free shipping that was fast. Product fit perfect was easy to install. When I need something else I will define come look at etrailer first.
by: William 08/21/2021
Perfect replacement! I highly recommend lubricating the channel and the seal prior to applying.
William
8/22/2022
Seal is still holding up very well after a year being parked outdoors. Great product!
by: Tony 08/22/2023
Product looks exactly like the original but maybe thicker which is better!!
by: Brian 11/28/2022
Quality and delivery good. The seal was difficult to install. Some instructions on the best way to do it would have been helpful.
I used a silicone lubricant on the seal and groove to get it to slide in but using a lubricant may cause it to easily pull out of the groove also.
by: Joe09/01/2023
Quick delivery and exactly what I order ed.
by: Terrence11/17/2020
Took a while to get here as the part was back ordered (two months), but the seal wasn't critical so not a big deal. Fit perfect, exactly what I needed.
25
100
Show More Reviews
See what our Experts say about this Pace Edwards Accessories and Parts
- Replacement Cover For Pace Edwards JackRabbit Retractable Hard Tonneau Cover # 311-JRF7084We do have the Replacement Cover with Handle # PE93QJ that will replace the cover for your 2009 Ford F-350 with the Pace Edwards JackRabbit Retractable Hard Tonneau Cover # 311-JRF7084. We also have the Replacement Tailgate Top Seal # PE99CV and Pace Edwards WeatherGate Tailgate Seal # 311-WG2001 if those are also in need of replacement.
view full answer... - Replacement Seals For Pace Edwards Switchblade Retractable Hard Tonneau Cover On 2019 Toyota TundraFor your Pace Edwards Switchblade Retractable Hard Tonneau Cover # 311-SWT5379 on your 2019 Toyota Tundra we have the following replacement parts. The Replacement Sweep Seal Roll # PE78UV comes in a 16' length and gets trimmed to fit. This will replace the sweep seals on the side rails for your Switchblade cover. The Replacement Component Kit # 311-RTPTCOMPKIT contains a 6' seal for the front of the cover where it meets the bed. And finally we have the Tailgate Top Seal # PE99CV.
view full answer... - Replacement Tailgate Seal For Pace Edward Tonneau CoversRight now, the only available tailgate seal that Pace Edwards offers is the rubber seal like the Replacement Tailgate Top Seal for Pace Edwards Retractable Tonneau Covers # PE99CV. This tailgate seal will fit the Pace Edwards Bedlocker, Full-Metal, JackRabbit, and the Switchblade tonneau cover.
view full answer... - Replacement Tailgate Seal For Pace Edwards UltraGroove Retractable Tonneau CoverHello Mark. I had my contact at Pace Edwards run the serial number of your cover. The correct replacement seal will be as follows: Replacement Tailgate Seal for Pace Edwards UltraGroove Retractable Tonneau Cover # PE84AJ
view full answer... - Replacement Parts for a Pace Edwards Switchblade Hard Tonneau Cover SWD2233 on a 2004 Dodge Ram No, I am sorry we do not have replacement rails for the Pace Edwards Switchblade Retractable Hard Tonneau Cover item # 311-SWD2233 that fits your 2004 Dodge Ram. The only replacement parts we have for this cover are listed below: Replacement Tailgate Top Seal for Pace Edwards Retractable Tonneau Covers item # PE99CV Replacement Component Kit for Pace Edwards SwitchBlade Retractable Tonneau Covers item # 311-RTPTCOMPKIT
view full answer... - Replacement Seals for a Pace Edwards Bedlocker Tonneau Cover on a 2015 Ford F-350 with 8' BedWe do have the Replacement Tailgate Top Seal # PE99CV, Replacement Sweep Seal Roll # PE78UV and Replacement Bulb Style Tailgate Seal # PE92TJ available like you mentioned. Currently, the "wear" strips are only available in the Replacement Rail Clamps # PE54CV.
view full answer... - Tailgate Seal Options for Pace Edwards Bedlocker TonneauThe part # PE99CV is a totally different seal design from the part # PE92TJ which is a bulb style. They both are tailgate seals for the Pace Edwards Bedlocker but the part # PE99CV is a sweep style seal and the part # PW92TJ is a bulb style. If what you have is the sweep style then yes the # PE99CV is correct and would fit your t-track.
view full answer... - Replacement Seals For A Pace Edwards Switchblade Hard Tonneau Cover On A 2016 Ford F-150 6.5' Bed The replacement seals for your Pace Edwards Switchblade Retractable Hard Tonneau Cover # SWFA06A29 are the Replacement Tailgate Top Seal for Pace Edwards Retractable Tonneau Covers # PE99CV for the tailgate and the Replacement Sweep Seal Roll for Pace Edwards Retractable Hard Tonneau Cover # PE78UV for the sides.
view full answer... - Installing the Replacement Tailgate Top Seal for Pace Edwards Retractable Tonneau CoversThe Replacement Tailgate Top Seal for Pace Edwards Retractable Tonneau Covers # PE99CV does not come with great instructions. In order to install the Replacement Tailgate Top Seal for Pace Edwards Retractable Tonneau Covers # PE99CV, you will need to start with the tonneau cover completely open. You'll then remove the tonneau railing caps or stop blocks, remove the 2 hex screws at the tailgate of the tonneau rails and remove the rear clamps. You'll then want to lift the end of the rail...
view full answer...
- How Long Is The Replacement Tailgate Top Seal for Pace Edwards Retractable Tonneau Cover?The overall length of the Replacement Tailgate Top Seal for Pace Edwards Retractable Tonneau Covers # PE99CV is 63" and is 1-1/2" wide.
view full answer...
- Replacement Seals for Pace Edwards Switchblade TonneauFor the Pace Edwards Switchblade we do have replacement seals. The Replacement Sweep Seal Roll # PE78UV comes in a 16' length and gets trimmed to fit. This will replace the sweep seals on the side rails for your Switchblade cover. The Replacement Component Kit # 311-RTPTCOMPKIT contains a 6' seal for the front of the cover where it meets the bed. And finally we have the Tailgate Top Seal # PE99CV.
view full answer... - Replacement Tailgate Top Seal for Pace Edwards Retractable Tonneau CoversIn order to install the Replacement Tailgate Top Seal for Pace Edwards Retractable Tonneau Covers # PE99CV you will need to start with the tonneau cover completely open. You'll then remove the tonneau railing caps or stop blocks, remove the 2 hex screws at the tailgate of the tonneau rails and remove the rear clamps. You'll then want to lift the end of the rail up to remove an inner screw that will reveal itself (one on each side) and need to be removed with a phillips head screwdriver....
view full answer... - Replacement Tailgate Seal and Bed Rail Seal for Pace Edwards Jack RabbitYes, the Pace Edwards replacement seal part # PE78UV is the correct replacement for your JackRabbit tonneau cover. Then for the tailgate seal you would want the part # PE99CV. We do not have the seal for the cannister at this time.
view full answer... - Availability of Replacement Hardware for Pace Edwards Full-Metal JackRabbit Tonneau CoverIf you are looking for replacement hardware for the Pace Edwards Full-Metal JackRabbit like the # 311-FEF3042 for your 2008 Ford F-150, it truly depends on what hardware you need. For instance, if you need a replacement tailgate seal, that is the # PE99CV. In order to determine what part you need, feel free to respond with the exact JackRabbit model number you have and the part you need, and I will be happy to point you in the right direction.
view full answer... - Replacement Parts For A Pace Edwards Hard Tonneau CoverFor Pace Edwards hard covers, like the Pace Edwards Switchblade Retractable Hard Tonneau Cover # 311-SWC95A17, we do carry replacement tailgate seal # PE99CV, passenger side rails # PE85GJ, and replacement driver side rails # 311-RTPT1300-5117-L. These parts are specific to # 311-SWC95A17, which is designed to fit a 2018 Chevrolet Silverado 1500, with a 6-3/4' bed. If you let me know what truck model and make with bed size you have, I'd be happy to see if we have something for you.
view full answer... - Replacement Parts for Pace Edwards BedLocker Tonneau CoverThere are some replacement parts available for the Pace Edwards BedLocker tonneau cover. There is a Replacement Tailgate Top Seal for Pace Edwards Retractable Tonneau Covers # PE99CV and there is also the Manual Switch Kit for Pace Edwards BedLocker or UltraGroove Electric Tonneau Cover # 311-BL-1120. There are also some different replacement Explorer rails depending on which model you have.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Edited by:
Lindsey S
Installed by:
Jeff D
Expert Research:
Jameson C
Written by:
Mark S
Updated by:
Michael B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Mark
3/31/2024
Product work great. I was able to cut to size. It was simple to install once I figured out what was needed. If you just remove the screws from the aback track and pull the cover out about 4 “ you can remove and slide the new part right in. My seal was very brittle so I used a screw driver and wd40 to clean channel. Tip place some dish soap in the channel before you slide the new price on. It will go on much easier. After one year the new seal works great, I have not had a leak yet.