Availability of Replacement Velcro Strip for Tonneau that is 1 inch Wide

Question

Question:

Velcro strips for 2012 chevy silverado 1 in wide

asked by: Marla D

0

Expert Reply:

The Truxedo replacement Velcro part # TX1117877 is 1 inch wide.

expert reply by: Jameson C

0

Answer 1

The hook piece on a Velcro setup is usually the piece that fails first, especially in a setup like this where the hook piece is attached to the vehicle and would be out in the sun. As long as your truck bed is 6-1/2 feet long and the cover you have…

view full answer...

Answer 2

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 3

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 4

The Demco Autoslide 5th Wheel Trailer Hitch w/ Slider #DM8550040 is going to need some rails to mount to in the bed of your 2020 Chevy Silverado. For this I recommend the Demco Premier Series Above-Bed Base Rails and Custom Installation Kit for 5th…

view full answer...

Answer 5

The Air Lift LoadLifter 5000 Ultimate Plus kits like the part #AL88288 that come with the braided lines actually also come with the nylon air tubing that runs to the inflation valve still which would be where you'd install a union tee like the…

view full answer...

Answer 6

We have replacement tonneau cover Velcro that is exactly 1-5/16 inches wide with the Truxedo part #TX1115174 which would fit your rails. It can be cut down shorter too as it is 80 inches long.

view full answer...

Answer 7

If you check out the attached picture you can see where you'll find the serial number and date code on your cover.

view full answer...

Answer 8

If you have the 8' bed then you can go with Replacement Truxedo Shur-Bond Velcro Brand Fastener for 8' Beds - 1" Width #TX1117877. If you have the 6-1/2' bed then you will want to go with Replacement TruXedo Shur-Bond Hook-And-Loop…

view full answer...

Answer 9

The correct replacement Velcro for a Truxedo Lo Pro QT tonneau is the part #TX1115174. This strip is 1-5/16 inches wide and could be trimmed to length to fit your truck.

view full answer...

Answer 10

I went out to our warehouse and measured the Truxedo Shur-Bond hook and loop fastener, #TX1115174, for you. It has a strip of plastic that slides into a track and is 80 inches long by 1-5/16 inches wide. The velcro portion of the strip is 1 inch…

view full answer...

Answer 11

We have just what you need as the cover you have on your 2006 Toyota Tundra crew cab 6 foot bed with bed cap is the part #TX545101 which means the replacement tarp is the part #TX545101-COVER.

view full answer...